OR Parting out 71 Cheyenne C20 - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DLTruck1973 · 02-28-2016, 12:54 PM

pic for gmc 2500 4x4

Oddfire · 02-28-2016, 05:31 PM

Paypal sent

oldchevynut · 02-29-2016, 07:35 AM

Can you do $100 shipped on the TH350 linkage and Throttle setup?

Minnz · 02-29-2016, 10:03 AM

"Lets see what fastpace says on the valve covers. I'll put you in second place for now. This one doesn't have the oil filler tube although I have several of them. 27.50 Shipped. I'll check on the stud and wing nut."

Dave,

I will take an oil filler tube and I will definitely take the valve covers if available. Any idea on an original carb stud and wing nut?

I just found out that I also need an original accelerator cable for a 1972, 350 4wd....anything lying around?

Thanks,
Lee

Clavo106 · 02-29-2016, 11:24 PM

inner fender wheel well passenger side if still available.?

62chevy302 · 02-29-2016, 11:51 PM

Do you have ebrake cable guides?

DLTruck1973 · 03-01-2016, 01:04 AM

Quote:

Originally Posted by jaybatta

Does the cigarette lighter have a light in it?I'd be interested in that.

Thanks,

Joe

Joe, I checked today and it does not have a lighted lighter. sorry

Quote:

Originally Posted by Dave

I need price and pics on the following, fuel tank selector, shield if equipped, fuel doors, headliner with trim and aux battery tray. Thx

Dave, No shield,20.00 on the selector, doors 15.00, no trim (can't remove with breaking the tabs), the aux batt tray was already gone. 46.00 shipped.

Quote:

Originally Posted by Ed F

The mirror picture is a little fuzzy. If there are no dents in them I will take them for $75 plus shipping

pics below of mirrors. 25.00 shipping

Quote:

Originally Posted by craneboy72

Can u post a pick of the rear marker lights and a price shipped to 01720?

they are original, 33.00 shipped. 12.50 each 8.00 shipping

Quote:

Originally Posted by oldchevynut

Can you do $100 shipped on the TH350 linkage and Throttle setup?

I could do 105.00 shipped

Quote:

Originally Posted by Minnz

"Lets see what fastpace says on the valve covers. I'll put you in second place for now. This one doesn't have the oil filler tube although I have several of them. 27.50 Shipped. I'll check on the stud and wing nut."

Dave,

I will take an oil filler tube and I will definitely take the valve covers if available. Any idea on an original carb stud and wing nut?

I just found out that I also need an original accelerator cable for a 1972, 350 4wd....anything lying around?

Thanks,
Lee

Lee, I'm Tom. My bad, this truck does have the filler tube. Sorry the valve covers are sold. 7.50 extra for the original wing nut and stud. No luck on the 4x4 cable those seem hard to find.

Quote:

Originally Posted by Clavo106

inner fender wheel well passenger side if still available.?

Sorry I can't help you on that one. I hang on to them for builds.

Quote:

Originally Posted by 62chevy302

Do you have ebrake cable guides?

2wd or 4wd? Do you need the short ones on the frame rails?

**Blue/72** · 03-01-2016, 01:07 AM

Any luck with bumper pictures?

DLTruck1973 · 03-01-2016, 01:19 AM

more pics

DLTruck1973 · 03-01-2016, 01:31 AM

few more pics

DLTruck1973 · 03-01-2016, 01:34 AM

Quote:

Originally Posted by Blue/72

Any luck with bumper pictures?

Just posted them. This is a nice bumper and looks to be original.

**Blue/72** · 03-01-2016, 02:23 AM

Quote:

Originally Posted by DLTruck1973

Just posted them. This is a nice bumper and looks to be original.

Can you hold it until the swap meet?

**craneboy72** · 03-01-2016, 07:19 AM

I will take the side marker lifts

**Dave** · 03-01-2016, 09:06 AM

I'll take the fuel doors, valve and plastic bezel, pending prices. Still need pics on aux battery tray and w/washer brkt that mounts on the RH fender. Also, I need a price on the headliner and if your keeping the trim. Lmk, thx.

Minnz · 03-01-2016, 10:16 AM

Tom (sorry about that "Dave" Thing)

Great, I'll take the oil filler tube for $27.50 and stud/wing nut for $7.50.....sending payment via PayPal shortly.

Lee

gpgofast · 03-01-2016, 10:23 AM

Interested in bumper, grill, brake booster and emblems...would be able to pickup in April at Portland swap meet. Are these still available?

oldchevynut · 03-01-2016, 10:31 AM

I'll take the TH350 shift linkage and throttle linkage setup. Paypal sent. Randy.

62chevy302 · 03-01-2016, 10:44 AM

Quote:

Originally Posted by DLTruck1973

2wd or 4wd? Do you need the short ones on the frame rails?

2wd i need all of them. Its for a 65 upgrade

tommys72 · 03-01-2016, 11:48 AM

Is the headliner trim good? If so, price and shipping to 65742.

Tom

knomadd · 03-01-2016, 12:04 PM

Are you parting with or do you have a set of the stainless wing windows? I'm looking for a set for my '71.

DLTruck1973 · 03-01-2016, 12:47 PM

Quote:

Originally Posted by Blue/72

Can you hold it until the swap meet?

I could certainly bring it to the meet but I would want paid now for it as I have other members asking about it and locals too. I turned down a local yesterday because of are pending deal.

Quote:

Originally Posted by craneboy72

I will take the side marker lifts

Cool...paypal addy is on the first post of thread.

Quote:

Originally Posted by Dave

I'll take the fuel doors, valve and plastic bezel, pending prices. Still need pics on aux battery tray and w/washer brkt that mounts on the RH fender. Also, I need a price on the headliner and if your keeping the trim. Lmk, thx.

Dave, No shield,20.00 on the selector, doors 15.00, no trim (can't remove with breaking the tabs), the aux batt tray was already gone. 46.00 shipped. Posted last night.

Quote:

Originally Posted by Minnz

Tom (sorry about that "Dave" Thing)

Great, I'll take the oil filler tube for $27.50 and stud/wing nut for $7.50.....sending payment via PayPal shortly.
Lee

Cool...Thanks!

Quote:

Originally Posted by gpgofast

Interested in bumper, grill, brake booster and emblems...would be able to pickup in April at Portland swap meet. Are these still available?

Pending deal on the bumper with Dave/72. Yes on grill, brake booster, and emblems. I can bring them to the meet but I would need paid now.

Quote:

Originally Posted by oldchevynut

I'll take the TH350 shift linkage and throttle linkage setup. Paypal sent. Randy.

Thanks Randy!

Quote:

Originally Posted by 62chevy302

2wd i need all of them. Its for a 65 upgrade

Ok...so the long one on the RH front and short ones on the sides. If so 27.00 shipped.

Quote:

Originally Posted by tommys72

Is the headliner trim good? If so, price and shipping to 65742.

Tom

Tom, Sorry there are several guys ahead of you if I was to part with them. If I can save them I will be reusing them on my build.

Quote:

Originally Posted by knomadd

Are you parting with or do you have a set of the stainless wing windows? I'm looking for a set for my '71.

Let me look at them and decide.

Thanks Guys, Tom

**Blue/72** · 03-01-2016, 12:58 PM

Pm on the way

62chevy302 · 03-01-2016, 01:27 PM

Quote:

Ok...so the long one on the RH front and short ones on the sides. If so 27.00 shipped.

Pm sent

gpgofast · 03-01-2016, 02:38 PM

Quote:

Originally Posted by DLTruck1973

I could certainly bring it to the meet but I would want paid now for it as I have other members asking about it and locals too. I turned down a local yesterday because of are pending deal.

Cool...paypal addy is on the first post of thread.

...

Pending deal on the bumper with Dave/72. Yes on grill, brake booster, and emblems. I can bring them to the meet but I would need paid now.

Thanks Randy!

...

Thanks Guys, Tom

Meant to ask for the Grill SURROUND if still available. Also, would be interested in the bumper if the sale falls through. Let me know if the surround is still available and total cost to paypal.

Thanks!

**Blue/72** · 03-01-2016, 04:04 PM

Picture and condition of the ash tray?

02-28-2016, 12:54 PM	#51
DLTruck1973 Registered User Join Date: Jan 2015 Location: Junction City OR Posts: 1,758	Re: Parting out 71 Cheyenne C20 pic for gmc 2500 4x4 Attached Images

02-28-2016, 05:31 PM	#52
Oddfire Registered User Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: Parting out 71 Cheyenne C20 Paypal sent

02-29-2016, 07:35 AM	#53
oldchevynut Registered User Join Date: Dec 2013 Location: northwestern PA Posts: 54	Re: Parting out 71 Cheyenne C20 Can you do $100 shipped on the TH350 linkage and Throttle setup?

02-29-2016, 10:03 AM	#54
Minnz Registered User Join Date: Aug 2014 Location: Minneapolis, MN Posts: 254	Re: Parting out 71 Cheyenne C20 "Lets see what fastpace says on the valve covers. I'll put you in second place for now. This one doesn't have the oil filler tube although I have several of them. 27.50 Shipped. I'll check on the stud and wing nut." Dave, I will take an oil filler tube and I will definitely take the valve covers if available. Any idea on an original carb stud and wing nut? I just found out that I also need an original accelerator cable for a 1972, 350 4wd....anything lying around? Thanks, Lee __________________ 72 Ochre Blazer 69 Camaro Z28 Garnet Red 48 Willys (rolled)

02-29-2016, 11:24 PM	#55
Clavo106 Registered User Join Date: Apr 2015 Location: Yakima, WA Posts: 362	Re: Parting out 71 Cheyenne C20 inner fender wheel well passenger side if still available.?

02-29-2016, 11:51 PM	#56
62chevy302 hillbilly Join Date: Apr 2007 Location: hampton,tn Posts: 459	Re: Parting out 71 Cheyenne C20 Do you have ebrake cable guides? __________________ -1962 C-10

03-01-2016, 01:07 AM	#58
Blue/72 Senior Member Join Date: Aug 2014 Location: Sandy, Oregon Posts: 2,376	Re: Parting out 71 Cheyenne C20 Any luck with bumper pictures? __________________ My dad always says that HEI distributers are pointless... •1972 Custom/10 Deluxe. My first truck and I've had it since I was 7. Tilt, tach, AM/FM, 350, deep dish rally's, original paint and an increasing amount of NOS jewelry. It's always taking my money.. •1967 c10 with tach, dropped 3/5 on deep dish rally's •1972 Cheyenne Super. Sold

03-01-2016, 01:19 AM	#59
DLTruck1973 Registered User Join Date: Jan 2015 Location: Junction City OR Posts: 1,758	Re: Parting out 71 Cheyenne C20 more pics Attached Images

03-01-2016, 01:31 AM	#60
DLTruck1973 Registered User Join Date: Jan 2015 Location: Junction City OR Posts: 1,758	Re: Parting out 71 Cheyenne C20 few more pics Attached Images

03-01-2016, 07:19 AM	#63
craneboy72 Senior Member Join Date: Jun 2015 Location: Acton Ma Posts: 748	Re: Parting out 71 Cheyenne C20 I will take the side marker lifts

03-01-2016, 09:06 AM	#64
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,380	Re: Parting out 71 Cheyenne C20 I'll take the fuel doors, valve and plastic bezel, pending prices. Still need pics on aux battery tray and w/washer brkt that mounts on the RH fender. Also, I need a price on the headliner and if your keeping the trim. Lmk, thx. Last edited by Dave; 03-01-2016 at 09:24 AM.

03-01-2016, 10:16 AM	#65
Minnz Registered User Join Date: Aug 2014 Location: Minneapolis, MN Posts: 254	Re: Parting out 71 Cheyenne C20 Tom (sorry about that "Dave" Thing) Great, I'll take the oil filler tube for $27.50 and stud/wing nut for $7.50.....sending payment via PayPal shortly. Lee __________________ 72 Ochre Blazer 69 Camaro Z28 Garnet Red 48 Willys (rolled)

03-01-2016, 10:23 AM	#66
gpgofast Registered User Join Date: Jan 2016 Location: Washoe Valley, NV Posts: 110	Re: Parting out 71 Cheyenne C20 Interested in bumper, grill, brake booster and emblems...would be able to pickup in April at Portland swap meet. Are these still available?

03-01-2016, 10:31 AM	#67
oldchevynut Registered User Join Date: Dec 2013 Location: northwestern PA Posts: 54	Re: Parting out 71 Cheyenne C20 I'll take the TH350 shift linkage and throttle linkage setup. Paypal sent. Randy.

03-01-2016, 11:48 AM	#69
tommys72 Registered User Join Date: Jun 2012 Location: springfield mo Posts: 3,075	Re: Parting out 71 Cheyenne C20 Is the headliner trim good? If so, price and shipping to 65742. Tom __________________ United States Marine Corps 2000-2011 Iraq and Afghanistan veteran Just living life now and enjoying it and my wife, daughter and son



Register or Log In To remove these advertisements.

03-01-2016, 12:04 PM	#70
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: Parting out 71 Cheyenne C20 Are you parting with or do you have a set of the stainless wing windows? I'm looking for a set for my '71. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

03-01-2016, 12:58 PM	#72
Blue/72 Senior Member Join Date: Aug 2014 Location: Sandy, Oregon Posts: 2,376	Re: Parting out 71 Cheyenne C20 Pm on the way __________________ My dad always says that HEI distributers are pointless... •1972 Custom/10 Deluxe. My first truck and I've had it since I was 7. Tilt, tach, AM/FM, 350, deep dish rally's, original paint and an increasing amount of NOS jewelry. It's always taking my money.. •1967 c10 with tach, dropped 3/5 on deep dish rally's •1972 Cheyenne Super. Sold

03-01-2016, 04:04 PM	#75
Blue/72 Senior Member Join Date: Aug 2014 Location: Sandy, Oregon Posts: 2,376	Re: Parting out 71 Cheyenne C20 Picture and condition of the ash tray? __________________ My dad always says that HEI distributers are pointless... •1972 Custom/10 Deluxe. My first truck and I've had it since I was 7. Tilt, tach, AM/FM, 350, deep dish rally's, original paint and an increasing amount of NOS jewelry. It's always taking my money.. •1967 c10 with tach, dropped 3/5 on deep dish rally's •1972 Cheyenne Super. Sold

Register or Log In To remove these advertisements.