Other 63-66 K10-20 Suspension Parts & Other Stuff

[Jimal]

Originally Posted by aerotruk63

Are you thinking of the transfercase crossmember? It's sold.

We're thinking the same part. The picture isn't in the original listing, but you described it correctly in your original response. When you said the parking brake parts were sold, I was concerned that you removed the little brackets that the cables clip into.

Did the rest of the parking brake system or transmission crossmember that was sold include this part?



Because I would take that too.

[aerotruk63]

Yes that part went to sampsmit000. Perhaps he is in no need of it and would sell it to you.

This is the crossmember your interested in correct?

[Jimal]

Originally Posted by aerotruk63

Yes that part went to sampsmit000. Perhaps he is in no need of it and would sell it to you.

Copy. I'll take the parts we discussed and I'll reach out to him.

[aerotruk63]

I think were getting closer to determine the correct part. lol Dam these new meds!

[Jimal]

Originally Posted by aerotruk63

Yes that part went to sampsmit000. Perhaps he is in no need of it and would sell it to you.

ssampsmit000 or BigSix?

This is the crossmember your interested in correct?

Yes. This crossmember and the six bed brackets. Thanks.

[aerotruk63]

Originally Posted by sampsmit000

Can I get a quote on shipping to 84043. And would they be the same on a shortness as a long bed or vice versa

Didn't get to ship on Friday, Provincial Holiday here and everything is shut down. Monday I'll have a tracking number for you.

[Brad54]

Is the front axle an open dif, or posi?
If posi, I might be interested in the carrier.

-Brad

[aerotruk63]

Brad54
Dana 23540X power lock
$250 + shipping

[aerotruk63]

Originally Posted by sampsmit000

Can I get a quote on shipping to 84043. And would they be the same on a shortness as a long bed or vice versa

They are shipped via UPS. Sent a tracking number via a PM.
Scheduled Delivery Date: Tuesday, 07/05/2016

[Jimal]

I may have needlessly complicated this whole thing, especially since the picture I was referring to is gone again. I'm looking for this crossmember.



Do you have a total with shipping to 06776 for that crossmember and the six bed brackets? I'm working with Big Six on that bracket that attaches to the transfer case crossmember.

[aerotruk63]

I'm sorry Jimal but I'm going to have to back out for now on these parts. I'm recouping from open heart surgery and was using this frame to bring in some income. Been out of work since December of last year. Doctors appointments and other things are putting pressure on me and I won't be able to do any work on the frame till next week. Sorry for the inconvenience.

[aotte1]

I will take the three brake line fittings, no rush on shipping, a week or two is fine, what ever time you need. Can I also get the rear axle bracket, that rear brake line fitting mounts into?


Again no rush, get well, with out stress.

Thanks,
Les

[aerotruk63]

aotte1 the fittings and bracket are yours. Thank you for your patience and understanding.

[aotte1]

Thanks,
I will PM you my address, just let me know in a few weeks when feeling better, total.


Les

[Jimal]

Originally Posted by aerotruk63

I'm sorry Jimal but I'm going to have to back out for now on these parts. I'm recouping from open heart surgery and was using this frame to bring in some income. Been out of work since December of last year. Doctors appointments and other things are putting pressure on me and I won't be able to do any work on the frame till next week. Sorry for the inconvenience.

I'm in no rush, as I'll have to pull my bed to replace the parts. I just realized that I created more confusion than I needed to with my posts. Whenever you're up to pulling the parts, I should be ready to purchase.

[gmc 2500 4x4]

i need a pair

[aerotruk63]

I don't have a set of 3/4 ton Hub Lok's.
Wish I could figure out the model number compared to the 1/2 ton Dana part number 22432X

Are the springs the issue in your pair? They are Dana part# 31346. GM part#3782277.
I have a call into John at
Border Parts.
3875 Bancroft Dr, Spring Valley, CA 91977, United States
Phone: +1 619-461-0171
These guys come recommended by the Dana Corporation for hard to find 4WD parts.

[liftlawssuck]

How is the rear most crossmember? The one right at the rear spring hangers. Shipped to 01543 if any good. Thanks.

[gmc 2500 4x4]

Originally Posted by aerotruk63

I don't have a set of 3/4 ton Hub Lok's.
Wish I could figure out the model number compared to the 1/2 ton Dana part number 22432X

Are the springs the issue in your pair? They are Dana part# 31346. GM part#3782277.
I have a call into John at
Border Parts.
3875 Bancroft Dr, Spring Valley, CA 91977, United States
Phone: +1 619-461-0171
These guys come recommended by the Dana Corporation for hard to find 4WD parts.

thanx for the tip and the pm! i just bought them!

[aerotruk63]

liftlawssuck looked at the rear crossmember, each end has biscuit rust and I would say not worth the bother of trying to repair.

[liftlawssuck]

Ok thanks for your time.

[Clanky]

Hello,
I have a '66 K20 in need of the front clip mounting bracket on the passenger side, mine is all but gone. Is that bracket available? I read some of the other posts so I am in no big fizz to get it right away. Please let me know when you get a chance.
Thanks much,
Karl

[aerotruk63]

Is this is the bracket you need Clanky?

[Clanky]

Thanks much for getting back to me. Not that bracket, it is the one in front of that one, just above the front spring front mount. The front clip bolts to them. I do need both sides if you have them still. Mine are so messed up I don't know if they were originally welded on or bolted on.
Thanks again!

[aerotruk63]

That is the rad support bracket for pickup. It was originally riveted on. If you had a Suburban then the mount could be a Vulcanized version.