MD 72 burb parts - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**richard2717** · 10-10-2016, 02:08 PM

Quote:

Originally Posted by richard2717

You are up on the chrome panel strips.

also in the interest of full disclosure I noticed there is a drilled hole in the short strip about 8" from the back end. I have attached picture with hole circled.

Richard

.

Panel strips are sold

jjzepplin · 10-10-2016, 08:48 PM

Quote:

Originally Posted by richard2717

correct there were a few parts just laying hap-hazard in the back of the truck. I have attached more pictures and they appear dent free, just have some really crusty paint on them.

looks like shipping is $12 with UPS so $27 total

Richard

SOLD! Monies on the way! Paypal OK?

**richard2717** · 10-10-2016, 09:01 PM

Quote:

Originally Posted by jjzepplin

SOLD! Monies on the way! Paypal OK?

Pm sent

jjzepplin · 10-10-2016, 10:12 PM

It is done.

**richard2717** · 10-11-2016, 06:55 AM

Quote:

Originally Posted by jjzepplin

It is done.

got it. they should go out today. Thanks

**richard2717** · 10-11-2016, 10:02 AM

Here is the rear carpet strip. nothing exciting, has rust and a couple break thru's on pass side. also has a few cutting wheel marks from cutting screw heads off. $35 plus shipping?

.

Speeding Dakota · 10-12-2016, 03:25 PM

Wondering how is the floor in the rear section? Is it worth cutting it out for patch panels for my truck ?
Thanks

**richard2717** · 10-12-2016, 03:40 PM

Quote:

Originally Posted by Speeding Dakota

Wondering how is the floor in the rear section? Is it worth cutting it out for patch panels for my truck ?
Thanks

there is a lot of rust in this thing. I would need you to show me what area you need but looking at these pictures there are not many square inches in good shape.

.

Heliarcn · 10-12-2016, 03:59 PM

I just though of another request richard2717. I need a section of the "A" pillar on the passenger side of the windshield. Pretty much the entire section from the bottom of the windshield to the roof as circled in the picture.

Are you willing to cut it out?

Heliarcn · 10-12-2016, 04:00 PM

Quote:

Originally Posted by Heliarcn

I just though of another request richard2717. I need a section of the "A" pillar on the passenger side of the windshield. Pretty much the entire section from the bottom of the windshield to the roof as circled in the picture.

Are you willing to cut it out?

Heres the picture, sorry about that.

**richard2717** · 10-12-2016, 04:18 PM

Quote:

Originally Posted by Heliarcn

I just though of another request richard2717. I need a section of the "A" pillar on the passenger side of the windshield. Pretty much the entire section from the bottom of the windshield to the roof as circled in the picture.

Are you willing to cut it out?

I can cut it, either way I will be cutting the entire tub up once i an done removing parts. Look at the pictures I just took. The only visible rust I see is up top where the roof separated from it and that is only surface rust. There is also a dent in it in the lower area where the paint is chipped. If it looks acceptable let me see how long it takes to get out and I will get you a price on it shipped.

.

**richard2717** · 10-12-2016, 05:00 PM

Quote:

Originally Posted by Heliarcn

I just though of another request richard2717. I need a section of the "A" pillar on the passenger side of the windshield. Pretty much the entire section from the bottom of the windshield to the roof as circled in the picture.

Are you willing to cut it out?

Bret,
Came out pretty easy and I cut it just past the factory joint up top so you can trim to where you need. $50 shipped. Might be able to get shipping a few dollars cheaper if i trim it back some more but I had a box that fit this perfect. LMK

Richard

.

**richard2717** · 10-12-2016, 05:19 PM

Quote:

Originally Posted by BaggedBurban

Is the tailgate push button latch in good operating condition and all there? If so how much do you want?

Got it apart today and is in good working condition No key $50 shipped
The chrome bezel has some paint overspray on it but it looks like it will polish up real nice. There are a few marks in the chrome on the push button I tried to show in the picture.

.

Bigdav160 · 10-12-2016, 05:39 PM

How's the tailgate? The inside pic look pretty good but how is the exterior metal? Full of bondo? Rust?

**richard2717** · 10-12-2016, 05:41 PM

Quote:

Originally Posted by AK72CHEVY

Interested in the upper hatch catch with bolts. Also, it looks like you may have a below eyeline mirror that is painted. If so I'd like that also. Shipping would be to 99918. Thanks.

hatch catch with bolts $20 plus shippingSOLD
1.5 painted mirrors $20 plus shipping

I just check UPS calculator and they are saying $85 to ship ground for all of it. Do you want me to check post office to see if any cheaper?

.

**richard2717** · 10-12-2016, 05:47 PM

Quote:

Originally Posted by Bigdav160

How's the tailgate? The inside pic look pretty good but how is the exterior metal? Full of bondo? Rust?

Just got done uploading pictures. Inside is heavy undercoat so I cant tell much. The pictures attached here I have taken black marker and marked the area of bondo. I just got my air compressor back together so I have not had a chance to grind it down to see if it is rust or dents, probably a combo of both. I will put a price as soon as I know actual detail but it will be tomorrow before i can do it.

The last picture shows how thick it is on pass. side but I think that is because they built it out to match the 1/2" thick bondo in the tail light area
Richard

.

Bigdav160 · 10-12-2016, 06:32 PM

Thanks. Not much different that mine. I wish they made a skin for them.

Heliarcn · 10-13-2016, 12:56 AM

Quote:

Originally Posted by richard2717

Bret,
Came out pretty easy and I cut it just past the factory joint up top so you can trim to where you need. $50 shipped. Might be able to get shipping a few dollars cheaper if i trim it back some more but I had a box that fit this perfect. LMK

Richard

.

Thats perfect. I'll take it.

**richard2717** · 10-13-2016, 07:02 AM

Quote:

Originally Posted by Heliarcn

Thats perfect. I'll take it.

Payment teceived. Send tracking PM

thanks

BaggedBurban · 10-13-2016, 07:51 AM

Quote:

Originally Posted by richard2717

Got it apart today and is in good working condition No key $60 shipped
The chrome bezel has some paint overspray on it but it looks like it will polish up real nice. There are a few marks in the chrome on the push button I tried to show in the picture.

.

I appreciate your time but I am going to pass. Thank you.

AK72CHEVY · 10-13-2016, 10:07 AM

Quote:

Originally Posted by richard2717

hatch catch with bolts $20 plus shipping
1.5 painted mirrors $20 plus shipping

I just check UPS calculator and they are saying $85 to ship ground for all of it. Do you want me to check post office to see if any cheaper?

.

I'll pass on the mirrors, but I would still like the catch and bolts if you could mail from the post office. Thanks.

**richard2717** · 10-13-2016, 04:25 PM

Quote:

Originally Posted by AK72CHEVY

I'll pass on the mirrors, but I would still like the catch and bolts if you could mail from the post office. Thanks.

let me see what the shipping will be from the post office tomorrow & i will get back to ya.

I figured the mirrors would kill with that quote.

Richard

**richard2717** · 10-14-2016, 06:48 AM

Any interest in the bare hatch before I throw away? It is real rusty ...but if someone likes metal work........... $25 plus shipping
]

.

**richard2717** · 10-14-2016, 06:49 AM

few more pics

.

**richard2717** · 10-14-2016, 07:01 AM

Metal radiator tube. No holes, minor pitting on end. Bead blasted outside and inside as far as I could reach both ends. $85 shipped

.

10-10-2016, 10:12 PM	#54
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: 72 burb parts It is done. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

10-11-2016, 10:02 AM	#56
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 burb parts Here is the rear carpet strip. nothing exciting, has rust and a couple break thru's on pass side. also has a few cutting wheel marks from cutting screw heads off. $35 plus shipping? . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

10-12-2016, 03:25 PM	#57
Speeding Dakota Registered User Join Date: Oct 2013 Location: Shrewsbury, PA Posts: 325	Re: 72 burb parts Wondering how is the floor in the rear section? Is it worth cutting it out for patch panels for my truck ? Thanks

10-12-2016, 03:59 PM	#59
Heliarcn Registered User Join Date: Nov 2013 Location: Las Vegas, Nevada Posts: 376	Re: 72 burb parts I just though of another request richard2717. I need a section of the "A" pillar on the passenger side of the windshield. Pretty much the entire section from the bottom of the windshield to the roof as circled in the picture. Are you willing to cut it out? __________________ Bret 1972 Chevy Suburban 1976 Blazer

10-12-2016, 05:39 PM	#64
Bigdav160 Registered User Join Date: Apr 2011 Location: Klein Texas Posts: 3,852	Re: 72 burb parts How's the tailgate? The inside pic look pretty good but how is the exterior metal? Full of bondo? Rust? __________________ My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe

10-12-2016, 06:32 PM	#67
Bigdav160 Registered User Join Date: Apr 2011 Location: Klein Texas Posts: 3,852	Re: 72 burb parts Thanks. Not much different that mine. I wish they made a skin for them. __________________ My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe

10-14-2016, 06:48 AM	#73
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 burb parts Any interest in the bare hatch before I throw away? It is real rusty ...but if someone likes metal work........... $25 plus shipping ] . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

10-14-2016, 06:49 AM	#74
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 burb parts few more pics . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

10-14-2016, 07:01 AM	#75
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 burb parts Metal radiator tube. No holes, minor pitting on end. Bead blasted outside and inside as far as I could reach both ends. $85 shipped . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.