Father / Daughter ’70 Short Bed Resto… - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ezrider01** · 01-20-2018, 03:21 PM

Seats done and ready to be installed along with the grill....

yuccales · 01-20-2018, 04:39 PM

Awesome! That truck's coming along great.

liftlawssuck · 01-20-2018, 07:45 PM

Sent you a PM.

**Steeveedee** · 01-21-2018, 12:06 AM

OK, I'm 65 years old, but I'd like to ask if you'd be my dad.

I'd love to have a truck like this. I recommend that you put some kind of fingerprint technology on the steering wheel or something, so that that knucklehead boyfriend she's bound to find can't drive it and trash it. :nods:

Acorn · 01-21-2018, 04:15 AM

I with steeveedee, will you adopt me?

Looking good! What type and color is that blue you are using?

70 shorty · 01-21-2018, 10:21 AM

Love seeing the progress! Keep up the great work.

Trucknut57 · 01-21-2018, 09:49 PM

How much of a PITA was installing the full floor?

**ezrider01** · 02-16-2018, 12:44 PM

Quote:

Originally Posted by yuccales

Awesome! That truck's coming along great.

Thanks for the comp...

**ezrider01** · 02-16-2018, 12:48 PM

Quote:

Originally Posted by Trucknut57

How much of a PITA was installing the full floor?

Replacing the full floor and firewall was the smartest decision for the cab rebuild...the real PITA was I also had to replace all 4 lower corner posts/door jam posts...now that was the PITA. Had to be very precise so that everything was squared out and doors had the correct reveal all around...but I will say the decision to replace all that was indeed the right one. Did take a lot of time.

**ezrider01** · 02-16-2018, 12:52 PM

Quote:

Originally Posted by 70 shorty

Love seeing the progress! Keep up the great work.

Thank you 70Shorty...love seeing the progress as well...now that im shooting the panels and cab...the juices are starting to flow heavy again...

**ezrider01** · 02-16-2018, 01:01 PM

Quote:

Originally Posted by Steeveedee

OK, I'm 65 years old, but I'd like to ask if you'd be my dad.

I'd love to have a truck like this. I recommend that you put some kind of fingerprint technology on the steering wheel or something, so that that knucklehead boyfriend she's bound to find can't drive it and trash it. :nods:

lol....the fingerprint id is a great idea...I'm one for that technology!!!

TXgearhead67 · 02-16-2018, 03:06 PM

Just read your thread and lovin it. Keep up the good work and updates.

**ezrider01** · 02-17-2018, 01:46 AM

So had a good couple of weeks. Making more progress on getting finish paint on the panels, and other cab miscellaneous parts. Got the cab shell to its final body work stage ready for the sealer:

Sorry about some of the pics, used the flash. Also the outer side of the fenders are not in clear yet.

**ezrider01** · 02-17-2018, 01:53 AM

Some of the cab misc parts I spoke of:

These are in clear.

**ezrider01** · 02-21-2018, 11:35 PM

2/21/2018 - So just finished with getting the cab in paint. Interior and door jams along with firewall are to the finish clear, everything else is just to base coat until I assemble the cab and front end. Will now proceed with putting interior and wiring together. Take a look....

72 tigger · 02-22-2018, 07:04 AM

Looks great!

**Advanced Design** · 02-22-2018, 07:32 AM

Great project and very nice work! Is your daughter still helping?

Syclone3Mt · 02-22-2018, 02:26 PM

Wow, its really coming together. Great job and keep up the good work.

**ezrider01** · 03-02-2018, 10:25 AM

Hey Doug, naaa, unfortunately she never got back into it. Guess it was taking too long for her.

TXgearhead67 · 03-02-2018, 03:48 PM

This may be a dumb question but why are you waiting to clear the other parts after assembly? I’m in the middle of a complete build and I plan on setting the cab on the frame . Then hang sheetmetal and adjust gaps. Then take everything back apart and paint and clear. Am I missing something bud?

**ezrider01** · 03-03-2018, 01:51 PM

Quote:

Originally Posted by TXgearhead67

This may be a dumb question but why are you waiting to clear the other parts after assembly? I’m in the middle of a complete build and I plan on setting the cab on the frame . Then hang sheetmetal and adjust gaps. Then take everything back apart and paint and clear. Am I missing something bud?

Hey TXgearhead67, no I wouldn't say your missing anything...this is just my approach of doing the final reassembly. I wait to shoot the clear until I have completed all the alignments/adjustments as necessary. The main reason for me is the the actual assembly of the sheet metal...since I do most (~95%) of the assembly solo...you never know WHEN or IF I may cause or get a scratch on a panel. If I do, well then its easier for me to repair at that stage before I am in full clear. So...that's just my logic...its worked out good for me so far.

I actually am at the stage of mounting the cab on the chassis and hanging the front inner and outer fenders, dong that this weekend...coming together nicely...will post pics soon!!!

**ezrider01** · 03-03-2018, 01:57 PM

Quote:

Originally Posted by 72 tigger

Looks great!

Thanks 72 tigger!!!

**ezrider01** · 03-03-2018, 02:00 PM

Quote:

Originally Posted by Syclone3Mt

Wow, its really coming together. Great job and keep up the good work.

Thanks for the props Syclone3MT!!! Cab and front fenders are on the chassis now...will post pics soon!

TXgearhead67 · 03-05-2018, 01:25 PM

Quote:

Originally Posted by ezrider01

Hey TXgearhead67, no I wouldn't say your missing anything...this is just my approach of doing the final reassembly. I wait to shoot the clear until I have completed all the alignments/adjustments as necessary. The main reason for me is the the actual assembly of the sheet metal...since I do most (~95%) of the assembly solo...you never know WHEN or IF I may cause or get a scratch on a panel. If I do, well then its easier for me to repair at that stage before I am in full clear. So...that's just my logic...its worked out good for me so far.

I actually am at the stage of mounting the cab on the chassis and hanging the front inner and outer fenders, dong that this weekend...coming together nicely...will post pics soon!!!

That makes sense. I never thought of it like that. Good job!

roastmaster · 03-05-2018, 02:28 PM

great project! we just started our father/son project on our 72. full porterbuilt front and rear and accuair e level. going to be fun. love the color that was chosen

01-20-2018, 03:21 PM	#51
ezrider01 Junior Member Join Date: Dec 2016 Location: Rio Rancho, NM or Tucson, AZ Posts: 68	Re: Father / Daughter ’70 Short Bed Resto… Seats done and ready to be installed along with the grill.... Attached Images __________________ My Classics: '72 Corvette Stingray '69 Chevy C10 (WIP)

01-20-2018, 04:39 PM	#52
yuccales Registered User Join Date: May 2011 Location: Northern Calif. Posts: 3,770	Re: Father / Daughter ’70 Short Bed Resto… Awesome! That truck's coming along great.

01-20-2018, 07:45 PM	#53
liftlawssuck Registered User Join Date: Mar 2011 Location: MA Posts: 353	Re: Father / Daughter ’70 Short Bed Resto… Sent you a PM.

01-21-2018, 12:06 AM	#54
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,676	Re: Father / Daughter ’70 Short Bed Resto… OK, I'm 65 years old, but I'd like to ask if you'd be my dad. I'd love to have a truck like this. I recommend that you put some kind of fingerprint technology on the steering wheel or something, so that that knucklehead boyfriend she's bound to find can't drive it and trash it. :nods: __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

01-21-2018, 04:15 AM	#55
Acorn Registered User Join Date: Jul 2013 Location: Winnsboro Texas Posts: 367	Re: Father / Daughter ’70 Short Bed Resto… I with steeveedee, will you adopt me? Looking good! What type and color is that blue you are using? __________________ The bitterness of poor quality lingers long after the sweetness of a low price is forgotten.

01-21-2018, 10:21 AM	#56
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,772	Re: Father / Daughter ’70 Short Bed Resto… Love seeing the progress! Keep up the great work. __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

01-21-2018, 09:49 PM	#57
Trucknut57 Registered User Join Date: Aug 2010 Location: Jennings, OK Posts: 322	Re: Father / Daughter ’70 Short Bed Resto… How much of a PITA was installing the full floor? __________________ Somehow, the idiots survive despite their best efforts to kill themselves. - dcozzi

02-16-2018, 03:06 PM	#62
TXgearhead67 Registered User Join Date: Sep 2017 Location: Carthage Texas Posts: 175	Re: Father / Daughter ’70 Short Bed Resto… Just read your thread and lovin it. Keep up the good work and updates.

02-17-2018, 01:46 AM	#63
ezrider01 Junior Member Join Date: Dec 2016 Location: Rio Rancho, NM or Tucson, AZ Posts: 68	Re: Father / Daughter ’70 Short Bed Resto… So had a good couple of weeks. Making more progress on getting finish paint on the panels, and other cab miscellaneous parts. Got the cab shell to its final body work stage ready for the sealer: Sorry about some of the pics, used the flash. Also the outer side of the fenders are not in clear yet. Attached Images __________________ My Classics: '72 Corvette Stingray '69 Chevy C10 (WIP) Last edited by ezrider01; 02-19-2018 at 11:48 PM.

02-17-2018, 01:53 AM	#64
ezrider01 Junior Member Join Date: Dec 2016 Location: Rio Rancho, NM or Tucson, AZ Posts: 68	Re: Father / Daughter ’70 Short Bed Resto… Some of the cab misc parts I spoke of: These are in clear. Attached Images __________________ My Classics: '72 Corvette Stingray '69 Chevy C10 (WIP) Last edited by ezrider01; 02-19-2018 at 11:50 PM.

02-21-2018, 11:35 PM	#65
ezrider01 Junior Member Join Date: Dec 2016 Location: Rio Rancho, NM or Tucson, AZ Posts: 68	Re: Father / Daughter ’70 Short Bed Resto… 2/21/2018 - So just finished with getting the cab in paint. Interior and door jams along with firewall are to the finish clear, everything else is just to base coat until I assemble the cab and front end. Will now proceed with putting interior and wiring together. Take a look.... Attached Images __________________ My Classics: '72 Corvette Stingray '69 Chevy C10 (WIP)

02-22-2018, 07:04 AM	#66
72 tigger Registered User Join Date: Apr 2008 Location: Berne IN Posts: 3,250	Re: Father / Daughter ’70 Short Bed Resto… Looks great!

02-22-2018, 07:32 AM	#67
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: Father / Daughter ’70 Short Bed Resto… Great project and very nice work! Is your daughter still helping? __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

02-22-2018, 02:26 PM	#68
Syclone3Mt Registered User Join Date: Jan 2018 Location: Billings, MT Posts: 79	Re: Father / Daughter ’70 Short Bed Resto… Wow, its really coming together. Great job and keep up the good work. __________________ My Build. http://67-72chevytrucks.com/vboard/s...d.php?t=757108

03-02-2018, 10:25 AM	#69
ezrider01 Junior Member Join Date: Dec 2016 Location: Rio Rancho, NM or Tucson, AZ Posts: 68	Re: Father / Daughter ’70 Short Bed Resto… Hey Doug, naaa, unfortunately she never got back into it. Guess it was taking too long for her. __________________ My Classics: '72 Corvette Stingray '69 Chevy C10 (WIP) Last edited by ezrider01; 03-03-2018 at 11:26 AM. Reason: Completeness.



Register or Log In To remove these advertisements.

03-02-2018, 03:48 PM	#70
TXgearhead67 Registered User Join Date: Sep 2017 Location: Carthage Texas Posts: 175	Re: Father / Daughter ’70 Short Bed Resto… This may be a dumb question but why are you waiting to clear the other parts after assembly? I’m in the middle of a complete build and I plan on setting the cab on the frame . Then hang sheetmetal and adjust gaps. Then take everything back apart and paint and clear. Am I missing something bud?

03-05-2018, 02:28 PM	#75
roastmaster Registered User Join Date: May 2017 Location: Mesa Arizona Posts: 25	Re: Father / Daughter ’70 Short Bed Resto… great project! we just started our father/son project on our 72. full porterbuilt front and rear and accuair e level. going to be fun. love the color that was chosen

Register or Log In To remove these advertisements.