AL Cutting up 65 cab - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mack B · 08-14-2018, 01:21 AM

Quote:

Originally Posted by made2drag

I bought a 64 with no driver door, so any door is better than nothing

.... how much do you need for it?

$30.00 it's yours. The glass has the blueish tint and it's good and the regulater and mechanisms worked when I got the truck no reason to think they don't anymore. I'm about 50 miles north of Mobile off I-65.

Quote:

Originally Posted by ScottH

Mack, any chance the steering column is available?

I believe so, the steering shaft was cut south of the shift linkage. It was a 3 speed column. I recently cut what was left of the cab up, but I believe it's still in the pile.

**ScottH** · 08-14-2018, 09:58 AM

Mack, dont need the center shaft just the column. If available could u lmk how much shipped to 08753?

Thanks
Scott

Mack B · 08-15-2018, 12:08 AM

Quote:

Originally Posted by ScottH

Mack, dont need the center shaft just the column. If available could u lmk how much shipped to 08753?

Thanks
Scott

I'll check tomorrow and pm you a total tomorrow. Thanks!

CousinTone · 08-16-2018, 12:21 AM

How is the A pillar, driver side, at the roof and the roof, in and out about 10 inches each direction. Hope that made sense. A pic would be greatly appreciated. Thank you, Tony V

made2drag · 08-16-2018, 01:24 PM

[QUOTE=Mack B;8322053]$30.00 it's yours. The glass has the blueish tint and it's good and the regulater and mechanisms worked when I got the truck no reason to think they don't anymore. I'm about 50 miles north of Mobile off I-65.

like Brewton or something?

made2drag · 08-16-2018, 01:25 PM

[quote=made2drag;8323644]

Quote:

Originally Posted by Mack B

$30.00 it's yours. The glass has the blueish tint and it's good and the regulater and mechanisms worked when I got the truck no reason to think they don't anymore. I'm about 50 miles north of Mobile off I-65.

like Brewton or something?

I can get to Greenville in a hour.

made2drag · 08-16-2018, 01:27 PM

[QUOTE=Mack B;8322053]$30.00 it's yours. The glass has the blueish tint and it's good and the regulater and mechanisms worked when I got the truck no reason to think they don't anymore. I'm about 50 miles north of Mobile off I-65.

I'm interested in the door... how much for fleetside bed?

Mack B · 08-17-2018, 12:02 AM

Quote:

Originally Posted by Mack B

I'll check tomorrow and pm you a total tomorrow. Thanks!

Scott, I didn't intentionally lie to you, work didn't go as planned. I just went out with a flash light the column is there, I'll get it out, get you a price this weekend. Sorry about that.

Quote:

Originally Posted by CousinTone

How is the A pillar, driver side, at the roof and the roof, in and out about 10 inches each direction. Hope that made sense. A pic would be greatly appreciated. Thank you, Tony V

The roof was very unfortunate. Wish I could help.

[quote=made2drag;8323648]

Quote:

Originally Posted by Mack B

$30.00 it's yours. The glass has the blueish tint and it's good and the regulater and mechanisms worked when I got the truck no reason to think they don't anymore. I'm about 50 miles north of Mobile off I-65.

I'm interested in the door... how much for fleetside bed?

Im in Atmore, same exit as the casino. The bed is gone. About all that's left is stainless windshield trim, chrome front and rear bumpers and a damaged aluminum grill. I also have a disc brake front crossmember and a different big back window panel if any of that interests you.

**ScottH** · 08-17-2018, 12:13 AM

Mack, no problem, I am in no rush. May have a lead on 1 locally so don't pull it just yet. I will let u know in a couple of days if the local 1 pans out.

Thanks

made2drag · 08-17-2018, 10:20 AM

[quote=Mack B;8324062]Scott, I didn't intentionally lie to you, work didn't go as planned. I just went out with a flash light the column is there, I'll get it out, get you a price this weekend. Sorry about that.

The roof was very unfortunate. Wish I could help.

Quote:

Originally Posted by made2drag

Im in Atmore, same exit as the casino. The bed is gone. About all that's left is stainless windshield trim, chrome front and rear bumpers and a damaged aluminum grill. I also have a disc brake front crossmember and a different big back window panel if any of that interests you.

Cool, I might be able to ride down like on Saturday the 25th possibly. I know this weekend is full. If you don't mind would you send me your number in PM so I can text you and get some pictures? Thanks, DJ

**ScottH** · 08-21-2018, 01:34 PM

Mack, found a column locally.

Mack B · 08-22-2018, 08:54 PM

Quote:

Originally Posted by ScottH

Mack, found a column locally.

Good deal, sir. Sorry I drug my feet on this.

Johns 66 · 10-26-2018, 04:47 PM

Whats the condition of the bed, specifically the drivers side

Mack B · 10-27-2018, 12:29 AM

Quote:

Originally Posted by Johns 66

Whats the condition of the bed, specifically the drivers side

Someone local bought it, but to answer your question it was god awful

How soon do you need a bed? I have 2 shortbed bedsides, but may need them. My plan is to use cut down long bedsides on my own truck for the wider wheel wells, the short bed is my backup in case I booboo. I think I'll have it sorted around February.

Johns 66 · 10-27-2018, 12:34 AM

Actually I need from the rear tire back but would prefer a whole bedside. Im still getting all the mechanical things done before I start with the body work

63jalopy · 03-24-2019, 05:27 PM

Any chance you still have the front fender brackets that bolt to the rear of the fenders down low?

Mack B · 03-24-2019, 06:08 PM

Quote:

Originally Posted by 63jalopy

Any chance you still have the front fender brackets that bolt to the rear of the fenders down low?

Is this the part you need? If so yes they should still be there

63jalopy · 03-24-2019, 08:00 PM

Yes that's them. Are they in ok shape? How much do you want for both sides?

Mack B · 03-24-2019, 10:20 PM

Quote:

Originally Posted by 63jalopy

Yes that's them. Are they in ok shape? How much do you want for both sides?

I’ll make sure they are both there and usable, and get you some pictures tomorrow.

made2drag · 03-25-2019, 10:48 AM

when you say possible spare bedsides....are you talking fleet?

made2drag · 03-25-2019, 11:16 AM

Quote:

Originally Posted by made2drag

when you say possible spare bedsides....are you talking fleet?

I guess there are no edits on sale forum. Thanks for getting back with me thru text.

Mack B · 03-25-2019, 01:39 PM

Quote:

Originally Posted by Mack B

I’ll make sure they are both there and usable, and get you some pictures tomorrow.

They are solid, but covered in surface rust. All the threads are non existent except the one that won’t let go of the bolt

If you can use these, pay the shipping, packaging + PayPal fees and they are yours.

63jalopy · 03-26-2019, 09:16 PM

Thanks man, but I think I'll pass. I appreciate it though.

Mack B · 03-27-2019, 12:31 AM

Quote:

Originally Posted by 63jalopy

Thanks man, but I think I'll pass. I appreciate it though.

Can't even give this crap away

No problem, sir. I totally understand.

Inkfamous-13 · 04-01-2019, 03:47 PM

how much for roof? I need the center of outside and inside I bought one with a 70 douche bag pop up sunroof and have got a power moon roof and skin from a car but depending on price might just put back to stock

08-14-2018, 09:58 AM	#52
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Cutting up 65 cab Mack, dont need the center shaft just the column. If available could u lmk how much shipped to 08753? Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

08-16-2018, 12:21 AM	#54
CousinTone Registered User Join Date: Jul 2015 Location: Placentia, CA Posts: 344	Re: Cutting up 65 cab How is the A pillar, driver side, at the roof and the roof, in and out about 10 inches each direction. Hope that made sense. A pic would be greatly appreciated. Thank you, Tony V

08-16-2018, 01:24 PM	#55
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: Cutting up 65 cab [QUOTE=Mack B;8322053]$30.00 it's yours. The glass has the blueish tint and it's good and the regulater and mechanisms worked when I got the truck no reason to think they don't anymore. I'm about 50 miles north of Mobile off I-65. like Brewton or something? __________________ my 86 c10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=496829 my 56 3100 build: http://67-72chevytrucks.com/vboard/s...09#post5712509 my 95 silverado build: http://67-72chevytrucks.com/vboard/s...35#post5879335 my gray 86 c10 http://67-72chevytrucks.com/vboard/s...34#post7624734

08-16-2018, 01:27 PM	#57
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: Cutting up 65 cab [QUOTE=Mack B;8322053]$30.00 it's yours. The glass has the blueish tint and it's good and the regulater and mechanisms worked when I got the truck no reason to think they don't anymore. I'm about 50 miles north of Mobile off I-65. I'm interested in the door... how much for fleetside bed? __________________ my 86 c10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=496829 my 56 3100 build: http://67-72chevytrucks.com/vboard/s...09#post5712509 my 95 silverado build: http://67-72chevytrucks.com/vboard/s...35#post5879335 my gray 86 c10 http://67-72chevytrucks.com/vboard/s...34#post7624734

08-17-2018, 12:13 AM	#59
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Cutting up 65 cab Mack, no problem, I am in no rush. May have a lead on 1 locally so don't pull it just yet. I will let u know in a couple of days if the local 1 pans out. Thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

08-21-2018, 01:34 PM	#61
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Cutting up 65 cab Mack, found a column locally. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-26-2018, 04:47 PM	#63
Johns 66 Registered User Join Date: Apr 2017 Location: Talladega Alabama Posts: 860	Re: Cutting up 65 cab Whats the condition of the bed, specifically the drivers side

10-27-2018, 12:34 AM	#65
Johns 66 Registered User Join Date: Apr 2017 Location: Talladega Alabama Posts: 860	Re: Cutting up 65 cab Actually I need from the rear tire back but would prefer a whole bedside. Im still getting all the mechanical things done before I start with the body work

03-24-2019, 05:27 PM	#66
63jalopy Registered User Join Date: Apr 2003 Location: Winchester, VA Posts: 10	Re: Cutting up 65 cab Any chance you still have the front fender brackets that bolt to the rear of the fenders down low?

03-24-2019, 08:00 PM	#68
63jalopy Registered User Join Date: Apr 2003 Location: Winchester, VA Posts: 10	Re: Cutting up 65 cab Yes that's them. Are they in ok shape? How much do you want for both sides?

03-25-2019, 10:48 AM	#70
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: Cutting up 65 cab when you say possible spare bedsides....are you talking fleet? __________________ my 86 c10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=496829 my 56 3100 build: http://67-72chevytrucks.com/vboard/s...09#post5712509 my 95 silverado build: http://67-72chevytrucks.com/vboard/s...35#post5879335 my gray 86 c10 http://67-72chevytrucks.com/vboard/s...34#post7624734

03-26-2019, 09:16 PM	#73
63jalopy Registered User Join Date: Apr 2003 Location: Winchester, VA Posts: 10	Re: Cutting up 65 cab Thanks man, but I think I'll pass. I appreciate it though.

04-01-2019, 03:47 PM	#75
Inkfamous-13 Registered User Join Date: Feb 2017 Location: Lake los angeles, CA Posts: 132	Re: Cutting up 65 cab how much for roof? I need the center of outside and inside I bought one with a 70 douche bag pop up sunroof and have got a power moon roof and skin from a car but depending on price might just put back to stock __________________ 'yeah I just had it painted' me: " dam man that thing looks like a side of beef" or "dam bro looks like a sack of walnuts" or the ever so smart ass: " well at least it's a friendly color, it waves as you drive by" first Boss's famous words "I dont know anyone who can see both sides at the same time" Just my 2 event's, tho nobody Carr's, sincerely AssHoleExtraordinaire.....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.