F/S OE 72 Big Block Parts, Brackets, Stove Pipe, Air Cleaner, Towers and/or Request?

[Classic Bowties]

rgtz67, per your request and our earlier communication here is another full 9 pc. BBC SWP A/C compressor mounting bracket setup ($375.) and a 3 pc. 72 BBC alternator bracket setup ($150.), we can ship both big block bracket setups to you for $26. sent via USPS priority insured. Please confirm interest or a pass here in thread, the payment options are listed in the first post of this F/S thread. Thanks, Mel

[bmfm64]

Hi Mel,
Do you have any good used ac compressors? I need one for my 72 Motor home with a 402 in it. Apparently the one I have is seized.

[rgtz67]

mel ,nice talking to you this morning ,i will take the 72 402 A/C $ 300.00 ,and alternator brackets $ 125.00 ,please send info about payment ,thanks

[Classic Bowties]

Originally Posted by rgtz67

mel ,nice talking to you this morning ,i will take the 72 402 A/C $ 300.00 ,and alternator brackets $ 125.00 ,please send info about payment ,thanks

The above pictured (post #51) 9 pc. BBC A/C and 3 pc. BBC 72 alternator bracket setups are headed your way, the package went out USPS priority on Thu. 04/19 and the projected delivery date listed on the postal receipt is Mon. 04/23. Thanks again and keep us in mind if we can help with anything else 67-72 related in the future, Mel

[Classic Bowties]

Originally Posted by bmfm64

Hi Mel,
Do you have any good used ac compressors? I need one for my 72 Motor home with a 402 in it. Apparently the one I have is seized.

Hey Buddy, due to size/weight this would have been a good part to have picked up in person when you were down a couple of weekends back, also seen in another thread that you were wanting a blazer/jimmy inside spare tire rack, we had two of them out at the swap meet when you picked up your other items, both were sold out there by Saturday eve. We do have a good used A6 compressor off of the last 72 big block truck that we parted, would do $100. on it picked up. Can also do a new reman A6 compressor for $225. picked up w/core exchange. Let me know, Mel

[Classic Bowties]

Originally Posted by rgtz67

mel ,nice talking to you this morning ,i will take the 72 402 A/C $ 300.00 ,and alternator brackets $ 125.00 ,please send info about payment ,thanks

rgtz67, thanks for confirming the safe arrival of the big block A/C and alternator brackets, they got there a full day early. Here are the requested pictures of the 72 BBC 402 remote fill p/s pump, reservoir and bracket setup that we can get headed you way, cost is $300. per BBC setup plus shipping, as was listed earlier in thread. The p/s setup shipping cost via Fedex home delivery to VA. Zip 24549 on 12" x 10" x 9" @ 18 Lbs. came in at $38.86 with a total transit time of 5 business days, both USPS priority and standard post ship quotes came in at over fifty dollars each w/o any insurance. About your question on the BBC remote fill reservoir extension bracket as seen earlier in this thread (Njeiv's p/s setup), the 72's never used the p/s fill reservoir to fender mounting ext. bracket, we have only found that OE bracket on the 68's. We do have the 68 big block reservoir can extension bracket available but it is a $75. bracket by itself. Thanks again for your earlier purchases and let us know if/when you are ready for that other full front 72 BBC SWP bracket/pulley setup for P/S & A/C, Mel

[Classic Bowties]

rgtz67, the big block remote fill p/s setup pictured in above post #56 is on the way, your package went out via fedex home delivery on Mon. 04/23, as of this evening the fedex website is projecting that you should see the parts this Fri. 04/27 by the end of the day. Thanks again, Mel

[Classic Bowties]

Bttt, anybody have any big block parts request/needs? Have lots of big block stuff already pulled/ready to ship and a fresh/just in 72 BBC/Th400 truck still sitting on the trailer yet. Just ask, and we can add pics/pricing to this F/S thread. Thanks, Mel

[turp mcspray]

Looking for a few 72 bb parts.
A pair of non smog exhaust manifolds.
A water pump pulley. 648
And the horseshoe shaped a/c bracket, that mounts on the intake.
Thank you!

[72Cheyenne454]

I'm working on on a 72 big block truck. I have most of the AC brackets (7pcs), but I'm missing the rear rod & exhaust manifold brace. How much for the 2pcs shipped to 92071. Feel free to PM.

Thanks,
Miles

Originally Posted by Classic Bowties

Bttt, anybody have any big block parts request/needs? Have lots of big block stuff already pulled/ready to ship and a fresh/just in 72 BBC/Th400 truck still sitting on the trailer yet. Just ask, and we can add pics/pricing to this F/S thread. Thanks, Mel

[turp mcspray]

Bump

[Classic Bowties]

Originally Posted by 72Cheyenne454

I'm working on on a 72 big block truck. I have most of the AC brackets (7pcs), but I'm missing the rear rod & exhaust manifold brace. How much for the 2pcs shipped to 92071. Feel free to PM.

Thanks,
Miles

Hi Miles, we do not currently have your two requested rear BBC A/C compressor braces/supports extra by themselves, at this time we only have them two braces available as part of the full 9 piece big block short water pump A/C bracket setups. Feel free to check back in down the road as our OE bracket and pulley inventory is constantly changing. Thanks for the inquiry, Mel

[Classic Bowties]

Originally Posted by turp mcspray

Looking for a few 72 bb parts.
A pair of non smog exhaust manifolds.
A water pump pulley. 648
And the horseshoe shaped a/c bracket, that mounts on the intake.
Thank you!

At this time we are of no help on the big block exhaust manifolds, most all of them have been selling along with the motors. We were able to dig up your other two BBC parts request and had them loose/extra outside of complete setups. Can ship either one or both parts for $8. sent USPS priority, payment can be sent via US postal moneyorder, paypal or credit card over the phone. Thanks, Mel

1 - OE BBC rear A/C compressor brace/bracket for intake manifold, cast p/n 3872726. $65.
1 - OE BBC 2-groove water pump pulley for A/C applications, stamped p/n 3995648 AG. $60.
.

[turp mcspray]

I will take them! (paypal) Thank you!

[Classic Bowties]

Originally Posted by turp mcspray

I will take them! (paypal) Thank you!

Okay, our info for sending of funds via paypal has been returned. Thanks, Mel

[Classic Bowties]

Originally Posted by turp mcspray

I will take them! (paypal) Thank you!

The BBC W/P pulley and A/C bracket pictured in above post #63 are headed your way, the package went out via USPS priority earlier today-Tue. 06/26, the projected delivery date listed on the postal receipt is this Fri. 06/29. Thanks again and keep us in mind if we can help with anything else 67-72 related in the future, Mel

[turp mcspray]

Parts arrived today. Thank you very much Mel!

[Baker70]

pm sent for complete 69 brackets and pulleys.

[Baker70]

I tried messaging you but it wouldn't go through do to high volume of messages. I am building a 69 with a 396 and I am in need of all of the brackets for A/C, power-steering, and alternator, and also all of the pulleys. Also looking for an air cleaner riser. Not sure what all parts you have left available but any help is greatly appreciated. Let me know what you have and I can send payment via PayPal. Thanks!

[Classic Bowties]

Originally Posted by Baker70

I tried messaging you but it wouldn't go through do to high volume of messages. I am building a 69 with a 396 and I am in need of all of the brackets for A/C, power-steering, and alternator, and also all of the pulleys. Also looking for an air cleaner riser. Not sure what all parts you have left available but any help is greatly appreciated. Let me know what you have and I can send payment via PayPal. Thanks!

Hello, we have no pm's from you in our mailbox and am just now seeing this parts inquiry/post from you. If still looking, we can supply most if not all of your entire list of needed big block parts. Let us know if still looking and we can get the parts pulled out and add some pictures here in thread. Thanks, Mel

[Baker70]

Hi Classic Bowties, I am still needing all of those parts so just let me know what you have and a price shipped to 47331

[Classic Bowties]

Here is another one year OE 72 big block engine tower/clam shell setup, offering at same price as listed/sold earlier in thread at $250. complete as pictured, will ship via USPS priority for $20., payment options are listed in the first post of this thread. Thanks, Mel

[Classic Bowties]

Originally Posted by Baker70

I am building a 69 with a 396 and I am in need of all of the brackets for A/C, power-steering, and alternator, and also all of the pulleys. Also looking for an air cleaner riser. Not sure what all parts you have left available but any help is greatly appreciated. Let me know what you have and I can send payment via PayPal. Thanks!

Per your request, here are OE big block parts that we have available/ready to ship out for you, we had your entire want list on hand with exception of the the 69 BBC air cleaner riser, we do have the BBC riser off of a 72 402 truck available and have included it in the below pics. We can carefully package and combine ship all of the below pictured parts for $56.74 to IN. 47331 via Fedex home delivery. Thanks, Mel

BBC 69 full 9 pc. A/C compressor bracket setup $375. complete, will also sell as a 7 pc. setup *w/o* rear rod & exh. manifold brace (*highlighted yellow*) for $300.

BBC 69 3 pc. A/C pulley set: 2 groove w/p pulley, 2 groove inner crank pulley and 1 groove outer crank p/s pulley. $150.

BBC 69 2 pc. alternator mounting bracket setup. $125.

BBC 72 Air cleaner riser/spacer setup, hose has both OE tower clamps yet and correct arrestor to valve cover tube. $75.

BBC 69 Remote fill P/S pump, both pump mounting brackets, pulley on pump and remote fill can/reservoir. $300.

.

[Classic Bowties]

More pics for Baker70...

[Baker70]

Payment sent for above pictured items!