ID Storage cleanout #3

[BLK65K10]

Originally Posted by LostMy65

Would you happen to have one of those backup switch thingies for those sm420?

Yes I probably do but I have dug that stash out yet. I will keep working on getting more out soon.

[BLK65K10]

Originally Posted by DPowers

I'll take this.

I added that to your pile. Thanks Lyle

[1960chevypanel]

Originally Posted by LostMy65

Not to derail this thread, but this has come up before. For the most part, the staff here has said they leave it up to the person posting the parts to decide if they want to consider the first one who inquires about the part first in line. In this case here, he specifically stated; "The first I'll take it".

.
In the future, just post; "I'll take it, but I have one question".
I posted earlier for the bumper brackets; "I'll take it pending pictures" because I wanted to see pictures before I committed.

Good advice, thanks LM65!

[BLK65K10]

66 C10 ebrake set complete with new center cable for shortbox-$35SOLD
66 c10 ebrake set complete longbox with or without backing plates-$30SOLD
c10 brake hose set(3)(brand new)-$15
C10 rear brake hose(brand new)-$5SOLD
Captain fab power steering braket-$25SOLD
66 c10 tierods(new but been sitting for a while only surface rust)-$20
66 ball joints upper and lower new-$40
66 Moog idler arm brand new-$40
292 6 cyl. water pump-$15
250 6 cyl. alternater with double pulley-$25
250 6 cyl. water pump pulley double groove-$10
all water necks,fans, spacers and pulleys-$5 ea. SOLD

[BLK65K10]

original swaybar(15/16 dia)-$20
later model swaybar (1 1/16 dia) w/ new aftermarket poly bushings and new brkts.-$75
later model (1 1/16 dia.) w/ original rubber bushings-$25SOLD

[DPowers]

I'll take:
66 C10 ebrake set complete with new center cable for shortbox-$35
66 c10 ebrake set complete longbox with or without backing plates-$30 (With backing plates.)
Both yellow water inlets on first row post 54 and the top black one in fourth row same post.
PM me total for everything I owe you please.

[PGSigns]

I will take these two. Zip is 23061.
Thanks
Jimmy
C10 rear brake hose(brand new)-$5
Captain fab power steering braket-$25

[pimpston65]

Originally Posted by BLK65K10

Photos for pinball chris.
Attachment 1850590

if pinball passes on this set i'll take them...

[Short 3/4]

Lyle,
I may have asked you this in the past, but if you find a 'cast' pass side mirror arm in your pile - I'll Take It - Please PM the price and consider it sold, as your parts and prices are always great.
Thanks,
Tom

[aotte1]

Lyle,

I will take two waterneck inlets correct for 283 and 327 model year 1964 to 66’.

Thanks
Les

[BLK65K10]

6 cyl. power steering brkt. -$80

[Brad54]

I’d like the two blue aluminum water necks, the two orange aluminum water necks, the the black aluminum water neck.
(Not sure which of the aluminum water necks are all still available, but I’ll take any of them like the orange ones in the middle row, and the black ones on the car row, that are still available... three SBC projects and intakes, and don’t know what T-stat housings I’ll need until they’re in the vehicle’s!)

[3100 Stepside]

I take the following parts, it they aint sold yet
#1 64-66 guage cluster-$65
#1 1 set V8 motor stands-$20 pr
#3 4 bbl intake and carb with oil fill-$40
# 17 1 cartridge oil filters-$15 ea. these are GM or AC
# 37 66 c10 emblem-$10

Do you have rear bumper brackets for a 1962 Stepside ?
Can I get shipping to
1039 lincoln Ave
North Charleston, SC 29405-3607
Thanks
Erik

[BLK65K10]

Brad I will add those to your other parts.

3100 Stepside All those parts are still available so I will work on getting them boxed and get you shipping cost. Thanks Lyle

[3100 Stepside]

Hi Lyle
Sounds good
Thanks Erik

[65TRUK]

I will take one good clutch fork, one good clutch spring, and one good zbar for a v8. Ship to 48642. Thanks,

[65TRUK]

I will take one good clutch fork, one good clutch fork spring, and one good zbar for a V8.
Please check shipping to 48642. Thanks,

[Brad54]

Originally Posted by BLK65K10

Brad I will add those to your other parts.

3100 Stepside

Thanks. PM me a total and how to pay you.

[Lokin4AReason]

how long have the ball joint(s) and the brake line(s) have been sitting up … ?

[Short 3/4]

Originally Posted by Short 3/4

Lyle,
I may have asked you this in the past, but if you find a 'cast' pass side mirror arm in your pile - I'll Take It - Please PM the price and consider it sold, as your parts and prices are always great.
Thanks,
Tom

Thought of something else I've been looking for. How about a good 64-5-6 lighter delete plug?
Thanks

[BLK65K10]

Originally Posted by Lokin4AReason

how long have the ball joint(s) and the brake line(s) have been sitting up … ?

I dont know for sure. They came with a parts lot I bought from a 66 suburban. THanks Lyle

[BLK65K10]

Originally Posted by Short 3/4

Thought of something else I've been looking for. How about a good 64-5-6 lighter delete plug?
Thanks

I believe I have one of those. I will dig it out. Thanks Lyle

[BLK65K10]

Originally Posted by Short 3/4

Thought of something else I've been looking for. How about a good 64-5-6 lighter delete plug?
Thanks

Is this the one you are looking for? How about $8 shipped. Let me know thanks Lyle

[BLK65K10]

3100 stepside, 65truk, and Brad54 PM's sent with payment info. Thanks Lyle

[Short 3/4]

Originally Posted by BLK65K10

Is this the one you are looking for? How about $8 shipped. Let me know thanks Lyle
Attachment 1865131

Attachment 1865132

Lyle,
Yes, that's it. Picture is a little fuzzy, but if it will clean up to decent driver quality and the clips on the back will still hold it into the dash, then -I'll take it- just let me know, and I'll send the money.
Thanks,
Tom