MD Suburban metal cuts

[richard2717]

Originally Posted by ajgriffin

I see you said you don't have any good lower metal, what about the driver's rear wheel well? I need a small section at the front, 4" up and 3" toward the rear to include the corner.

Attachment 1973201

I can take a better picture with tape on the wheel well if it would communicate better. This is the area I'm trying to patch.

Attachment 1973203

I might have what you need but it will be the 20th before I can check. I am visiting with my son until then. If you dont hear back from me on 20th please send me a reminder. Thanks

[ajgriffin]

Originally Posted by richard2717

I might have what you need but it will be the 20th before I can check. I am visiting with my son until then. If you dont hear back from me on 20th please send me a reminder. Thanks

👌🏾thanks! Enjoy the time with your son

[ajgriffin]

Originally Posted by richard2717

I might have what you need but it will be the 20th before I can check. I am visiting with my son until then. If you dont hear back from me on 20th please send me a reminder. Thanks

Hey Richard, hope you made it back safely. Can you check to see if you have the small cut available?

[richard2717]

I have been out with the flu since returning from my trip. I will try to take a look today and post pics

[richard2717]

I just went out and checked. Everything I have has badly rusted flanges

[ajgriffin]

Thanks for checking, hope you feel better soon!

[wesleytucker454]

Hey Richard. Do you still have that complete suburban floor for sale? I’m interested in it if you still have it! Thank you!

[richard2717]

Originally Posted by wesleytucker454

Hey Richard. Do you still have that complete suburban floor for sale? I’m interested in it if you still have it! Thank you!

I do still have it but not sure on shipping. Last time I tried to get fastenal to quote they told me the dimensions were too large for them to handle.

[wesleytucker454]

If you would be willing to PM me some dimensions and a from zip code, I’ll look into some options. Do you have some detailed pictures of it? Thank you.

[slammerd]

Do you have any rear burb upper hatches for sale like the one that is aqua and white in the first post? Thanks.

[richard2717]

Originally Posted by wesleytucker454

If you would be willing to PM me some dimensions and a from zip code, I’ll look into some options. Do you have some detailed pictures of it? Thank you.

Shipping from Zipcode is 21801. Here are some pictures. The floor section has been hanging on the wall inside the shop since these pictures were taken. Let me know if there is something specific you want to see. I should also mention that after looking back at the original post I left out some info on the floor. When I said complete floor, it should have said complete 2nd row floor. it was cut underneath the drivers seat area due to rust thru around the driver & passenger feet area. Just wanted to make sure that was clear before you spend time searching shipping options. The rough dimensions without crate is like 69" square and it would probably be require to be at least 24" deep so the crate would stand up. I can assist with crating and loading onto the transport if you get it worked out.

.

[richard2717]

Originally Posted by slammerd

Do you have any rear burb upper hatches for sale like the one that is aqua and white in the first post? Thanks.

I replied to your pm. I have several but they all need work.

[slammerd]

Originally Posted by richard2717

I replied to your pm. I have several but they all need work.

Sounds Good, replied back.

[Dave]

Richard,
It was great to meet you! Thank you for all the good parts, much appreciated!

[richard2717]

Originally Posted by Dave

Richard,
It was great to meet you! Thank you for all the good parts, much appreciated!

Same here Dave, Let me know if you need anything else.

[Dave]

I'm sure I'll need something buddy.

[C130Nav]

Richard,

I need L/R cab mounts for the #3 position. Also, need #4 position (above front leaf shackle location) mounts for K10 4WD burb (leaf spring rear end)

PM me with cost please

Mike

[m7vasque]

Richard,

Do you have the last foot of a 1972 4x4 leaf spring rear frame? (both sides) Prior owner cut off the rear bumper mounting tabs for a custom bumper.

Please PM me a cost to 92024.

Thanks!
Posted via Mobile Device

[richard2717]

Originally Posted by C130Nav

Richard,

I need L/R cab mounts for the #3 position. Also, need #4 position (above front leaf shackle location) mounts for K10 4WD burb (leaf spring rear end)

PM me with cost please

Mike

All of my mounts will be from a 2wd frame, are they the same? If so I can check to see what I have.

[richard2717]

Originally Posted by m7vasque

Richard,

Do you have the last foot of a 1972 4x4 leaf spring rear frame? (both sides) Prior owner cut off the rear bumper mounting tabs for a custom bumper.

Please PM me a cost to 92024.

Thanks!
Posted via Mobile Device

I will check today but I think all my frames are coil spring

[C130Nav]

Richard,

#3 body mount brackets are the same for 2wd and 4wd. #4 are different because they're bracketed in/around front leaf shackle mount for leaf spring trucks.

I'll take #3 frame brackets; both left and right.

Shipping to 72207 please

Mike

[C130Nav]

M7vasque,

I'm pretty sure that last foot is the same whether leaf or coil. More than about 20-22" forward is a little different, but only in the rear leaf shackle bracket area. Going thru this myself right now, and got end cuts from Richard 2 trs ago.

PO of the 4WD chassis I have hacked and molded it to fit a LWB truck

[m7vasque]

Originally Posted by richard2717

I will check today but I think all my frames are coil spring

Richard, seems that coil spring frame would be the same the last foot. Please quote me for both ends shipped to 92024. Thanks in advance
Posted via Mobile Device

[richard2717]

Originally Posted by C130Nav

Richard,

#3 body mount brackets are the same for 2wd and 4wd. #4 are different because they're bracketed in/around front leaf shackle mount for leaf spring trucks.

I'll take #3 frame brackets; both left and right.

Shipping to 72207 please

Mike

Mike
It has been real wet here but I did find a box of brackets already pulled here in the shop. Is the pair of brackets shown here what you need? or is it the smaller single bracket you are looking for (would need to check outside for the matching side) The pair shown would be $75 shipped and they are very nice. I would need to see If I have a good 2nd bracket for the smaller if that is what you needed.


.

[richard2717]

Originally Posted by m7vasque

Richard, seems that coil spring frame would be the same the last foot. Please quote me for both ends shipped to 92024. Thanks in advance
Posted via Mobile Device

Here is some pics of the ones I have available at the moment. they have pcs of a hitch that would need cleaned off and the rear body mount holes could use a little work. $75 shipped for the pair .


.