1968 c10 396

[mike's1965]

https://youtu.be/80jSimJATfk

[mike's1965]

Originally Posted by weq92f

Fairly recently, I had a set of #063 heads worked at a shop with 3 angle valve job, new SS valves, dual springs, guides, seals, retainers and keepers ( stock valve sizes ). All in it was just under 1400. This was with me bringing in the heads.

Now I don't know what those Edelbrock heads cost but the comparison is healthy! Especially given the weight of the iron ones.

Hth,

-klb

I see them advertised for $995.00 each, assembled and I think it's same price for ones with springs for flat tappet, or springs for roller cam.

[mike's1965]

https://www.jegs.com/i/Edelbrock/350...MaAg8nEALw_wcB

It says with flat top pistons and these heads makes 9.2-1 compression ratio, I wonder what it would be with the pop up pistons in my engine?

[mike's1965]

https://www.camaros.net/threads/396-build-help.187075/

Searched my head numbers and found this thread interesting, it's possible these are the original heads on my 396.

Someone in there said they are 122cc chambers.