Do you need '64-'66 Chevy Truck Parts? - Page 30 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BR3W CITY · 10-19-2009, 10:09 PM

Got the sill panels, thanks!

*LILRED66* · 10-20-2009, 06:02 AM

Quote:

Originally Posted by BR3W CITY

Got the sill panels, thanks!

Thanks for your business Jason. I hope they work for you. Please let me know if I can help you with other good, used '60-'66 Chevy/GMC truck parts in the future.

lostnthe60s · 10-28-2009, 02:51 PM

Don't forget I am looking for a drivers fender and two doors as well thx

283 Man · 10-29-2009, 05:35 AM

Tony,looking for a good working 3 speed transmission or 4 speed granny low transmission that the starters bolts to the transmisson instead of engine block,price on one please and i will drive up to pick up if its in my price range.Its for my second 66 project truck this one. thanks Morton

*LILRED66* · 10-31-2009, 07:42 AM

Quote:

Originally Posted by 283 Man

Tony,looking for a good working 3 speed transmission or 4 speed granny low transmission that the starters bolts to the transmisson instead of engine block,price on one please and i will drive up to pick up if its in my price range.Its for my second 66 project truck this one. thanks Morton

Hey Morton. Good to hear from you. I have a few good, used factory SM420 4-speed transmissions, as well as, a few good, used 3-speed manual transmissions available. They go for $125.00 each, picked up at my shop in Kansas City, KS. The starter bolts to the bell housing.

283 Man · 10-31-2009, 07:06 PM

Quote:

Originally Posted by LILRED66

Hey Morton. Good to hear from you. I have a few good, used factory SM420 4-speed transmissions, as well as, a few good, used 3-speed manual transmissions available. They go for $125.00 each, picked up at my shop in Kansas City, KS. The starter bolts to the bell housing.

is the bell houseing included with the 4 speed trans?with the linkage to? thanks

yoderconsult · 11-01-2009, 07:28 PM

Looking for a 3 speed on the steering column. I have a 66 chevy stepvan with a column that needs replaced.

*LILRED66* · 11-02-2009, 05:10 AM

Quote:

Originally Posted by 283 Man

is the bell houseing included with the 4 speed trans?with the linkage to? thanks

The 4-speed is complete with the bell housing and the shifter, but there is no linkage on a 4-speed.

*LILRED66* · 10-31-2009, 07:40 AM

Quote:

Originally Posted by lostnthe60s

Don't forget I am looking for a drivers fender and two doors as well thx

Thanks for the inquiry. I do have some good, used door shells and front fenders, as well as, other good, used parts for '60-'66 Chevy/GMC trucks.

Good, used door shells are $175.00, picked up at my shop in Kansas City, KS. I can ship, via UPS-Ground for an additional $60.00.

Good, used front fenders are $175.00, picked up at my shop in Kansas City, KS. I can ship, via UPS-Ground for an additional $45.00.

Thanks for the opportunity and please let me know if I can help you with these items or other good, used '60-'66 Chevy/GMC truck parts in the future.

treegump · 11-03-2009, 07:07 PM

I was looking at a 1964 C20 4x4 with closed knuckles, and front drum brakes. Do you have replacement parts for that front end? The main reason I didn't buy it was because I couldn't find an online place that sold parts for that front end. Thanks!

283 Man · 11-03-2009, 09:07 PM

Tony Ill be sending you out a money order for 4 speed granny low transmission for $125.00 just have to look and see in a few days when we could meet at your shop to pick it up. thanks Morton

jbgroby · 11-03-2009, 09:45 PM

Tony,

I got the fender in I really like the wrapping I can use then for protect other things ! Thanks

Will buy from again.

Jake

*LILRED66* · 11-04-2009, 07:50 AM

Quote:

Originally Posted by jbgroby

Tony,

I got the fender in I really like the wrapping I can use then for protect other things ! Thanks

Will buy from again.

Jake

Good deal Jake. I appreciate your business. Take care.

*LILRED66* · 11-04-2009, 07:50 AM

Quote:

Originally Posted by 283 Man

Tony Ill be sending you out a money order for 4 speed granny low transmission for $125.00 just have to look and see in a few days when we could meet at your shop to pick it up. thanks Morton

Sounds great Morton. Please let me know your travel plans and I will make arrangements to meet you at the shop and help you load it.

*LILRED66* · 11-04-2009, 07:48 AM

Quote:

Originally Posted by treegump

I was looking at a 1964 C20 4x4 with closed knuckles, and front drum brakes. Do you have replacement parts for that front end? The main reason I didn't buy it was because I couldn't find an online place that sold parts for that front end. Thanks!

Welcome to the forums from Kansas City, KS. You will find a wealth of knowledge here. Good luck with your purchase of the '64 Chevy K20 4x4. The parts are available, however, I don't have any loose front differentials or parts for them. I know they are available.

Thanks for the inquiry and please let me know if I can help you with other good, used '60-'66 Chevy/GMC truck parts in the future and sorry I couldn't help you with the K20 front differential parts.

spr85gmc · 11-09-2009, 11:09 PM

im in search of the full gaugecluster (i believe thats what its called) for a 66 gmc have one?

reighmey · 11-11-2009, 02:52 PM

Tony how about radio knobs for my 65 GMC - also the mounting bracket for the radio?

aggie91 · 11-11-2009, 05:46 PM

Tony,

I am looking for a set of painted hub caps like these:
http://www.classicparts.com/1964-66-...ctinfo/64-029/

My truck had a white painted version of that cap when I got it from my Grandfather. Do you have a set? Perfer something that may need refinishing but no dents...

Thanks,

reighmey · 11-12-2009, 02:56 PM

http://macon.craigslist.org/cto/1462679939.html

joe231 · 11-12-2009, 03:05 PM

Quote:

Originally Posted by reighmey

http://macon.craigslist.org/cto/1462679939.html

dang!!
There you go Tony!
you could get into the 67-72 parts business also

*LILRED66* · 11-15-2009, 01:37 AM

Quote:

Originally Posted by reighmey

http://macon.craigslist.org/cto/1462679939.html

Thanks for sharing, but they are doing the same thing I am doing, so I doubt I will be doing business with them.

I will stick to good, used '60-'66 Chevy/GMC trucks and parts.

*LILRED66* · 11-15-2009, 01:43 AM

Quote:

Originally Posted by aggie91

Tony,

I am looking for a set of painted hub caps like these:
http://www.classicparts.com/1964-66-...ctinfo/64-029/

My truck had a white painted version of that cap when I got it from my Grandfather. Do you have a set? Perfer something that may need refinishing but no dents...

Thanks,

15" or 16" wheels?
clips or non-clips on the wheels?

aggie91 · 11-16-2009, 01:38 PM

Quote:

Originally Posted by LILRED66

15" or 16" wheels?
clips or non-clips on the wheels?

15" wheels, no clips. Wheels have bumps to hold a 10 1/8" dia cap.

aggie91 · 11-16-2009, 01:40 PM

Quote:

Originally Posted by LILRED66

15" or 16" wheels?
clips or non-clips on the wheels?

Thanks, Tony

15" wheels, no clips. Wheels have bumps to hold a 10 1/8" dia cap. Mine where factory painted white on my 65 when I got it. I was to young to know better when I got it to save them for the future...

*LILRED66* · 11-15-2009, 01:42 AM

Quote:

Originally Posted by reighmey

Tony how about radio knobs for my 65 GMC - also the mounting bracket for the radio?

I have both. Are you looking for black knobs or black/chrome factory radio knobs?

10-19-2009, 10:09 PM	#1
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Do you need '64-'66 Chevy Truck Parts? Got the sill panels, thanks! __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

10-28-2009, 02:51 PM	#3
lostnthe60s Registered User Join Date: Oct 2009 Location: Atkins, Arkansas Posts: 6	Re: Do you need '64-'66 Chevy Truck Parts? Don't forget I am looking for a drivers fender and two doors as well thx

10-29-2009, 05:35 AM	#4
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: Do you need '64-'66 Chevy Truck Parts? Tony,looking for a good working 3 speed transmission or 4 speed granny low transmission that the starters bolts to the transmisson instead of engine block,price on one please and i will drive up to pick up if its in my price range.Its for my second 66 project truck this one. thanks Morton Attached Images __________________ 283 the mighty small block

11-01-2009, 07:28 PM	#7
yoderconsult 66 Chevy Shorty Stepvan Join Date: Oct 2009 Location: Portland, Oregon Posts: 6	Re: Do you need '64-'66 Chevy Truck Parts? Looking for a 3 speed on the steering column. I have a 66 chevy stepvan with a column that needs replaced.

11-03-2009, 07:07 PM	#10
treegump Registered User Join Date: Oct 2009 Location: NW, IN Posts: 4	Re: Do you need '64-'66 Chevy Truck Parts? I was looking at a 1964 C20 4x4 with closed knuckles, and front drum brakes. Do you have replacement parts for that front end? The main reason I didn't buy it was because I couldn't find an online place that sold parts for that front end. Thanks!

11-03-2009, 09:07 PM	#11
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: Do you need '64-'66 Chevy Truck Parts? Tony Ill be sending you out a money order for 4 speed granny low transmission for $125.00 just have to look and see in a few days when we could meet at your shop to pick it up. thanks Morton __________________ 283 the mighty small block

11-03-2009, 09:45 PM	#12
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: Do you need '64-'66 Chevy Truck Parts? Tony, I got the fender in I really like the wrapping I can use then for protect other things ! Thanks Will buy from again. Jake __________________ http://s1299.photobucket.com/user/jb...23904108567829

11-09-2009, 11:09 PM	#16
spr85gmc Registered User Join Date: Jul 2007 Location: san antonio Posts: 648	Re: Do you need '64-'66 Chevy Truck Parts? im in search of the full gaugecluster (i believe thats what its called) for a 66 gmc have one?

11-11-2009, 02:52 PM	#17
reighmey Registered User Join Date: Oct 2009 Location: lumpkin, ga Posts: 98	Re: Do you need '64-'66 Chevy Truck Parts? Tony how about radio knobs for my 65 GMC - also the mounting bracket for the radio?

11-11-2009, 05:46 PM	#18
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Do you need '64-'66 Chevy Truck Parts? Tony, I am looking for a set of painted hub caps like these: http://www.classicparts.com/1964-66-...ctinfo/64-029/ My truck had a white painted version of that cap when I got it from my Grandfather. Do you have a set? Perfer something that may need refinishing but no dents... Thanks, __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

11-12-2009, 02:56 PM	#19
reighmey Registered User Join Date: Oct 2009 Location: lumpkin, ga Posts: 98	Re: Do you need '64-'66 Chevy Truck Parts? http://macon.craigslist.org/cto/1462679939.html



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.