|
02-22-2024, 01:46 PM | #1 |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: Project: Tow-Rat (Lil' Blue)
One of my favorite duallys! (and I'm not a dually guy)
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
02-22-2024, 04:22 PM | #2 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,105
|
Re: Project: Tow-Rat (Lil' Blue)
are you puting a bumper on the front?
|
02-23-2024, 10:39 AM | #3 |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,081
|
Re: Project: Tow-Rat (Lil' Blue)
thank you!
hopefully you still like it after i do the bed. it'll be a little different. sure thing, i have the factory matching patina front bumper for it. will get placed a little tighter to the body, and a little lower to the ground. i then have a 70's step bumper for the back |
02-23-2024, 09:48 PM | #4 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,105
|
Re: Project: Tow-Rat (Lil' Blue)
the task force trucks with no front bumper kinda look like they are launching when they are sitting still, haha.
|
02-28-2024, 03:43 PM | #5 |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,081
|
Re: Project: Tow-Rat (Lil' Blue)
so it begins ...
i only have a few things to hook up, but there are so many damn wires!! |
02-28-2024, 05:29 PM | #6 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,105
|
Re: Project: Tow-Rat (Lil' Blue)
looks pretty neat to me. keep going one circuit at a time and soon you won't have any circuits left.
|
02-29-2024, 09:11 AM | #7 | |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,081
|
Re: Project: Tow-Rat (Lil' Blue)
Quote:
i have always HATED the "Christmas tree press-in clip" style zip ties on factory harnesses. just a pain, never reusable, etc. well while working on the wife's vette i finally bought a bag of 100 of em and i'm starting to really like them. now that i can just cut em off n replace they are super handy. 1/4" hole, super secure, done. also, this cheap split seam loom from amazon is way better than that old plastic corrugation stuff i've used in the past. |
|
02-29-2024, 06:57 AM | #8 |
Senior Member
Join Date: Mar 2008
Location: tyler texas
Posts: 1,537
|
Re: Project: Tow-Rat (Lil' Blue)
You're on the downhill side. It looks good at that ride height.
__________________
NHRA Super Street 469C It only runs 10.90 at 156 mph |
02-29-2024, 09:15 AM | #9 | |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,081
|
Re: Project: Tow-Rat (Lil' Blue)
Quote:
i've searched and searched, but cant' find a good cheap set of factory late-gen C30 knuckles. i'd really like to have a set on the shelf for back-up. i made some 3" bag spacers for the back, and by swapping out these drop knuckles i could gain back a real functional height while still getting low enough to be pretty sick. what drives me nutz is i had a set on that chassis i bought and they got scrapped. immediate regret. |
|
02-29-2024, 09:46 AM | #10 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,105
|
Re: Project: Tow-Rat (Lil' Blue)
there is also a tool that helps insert the wire into the splkit loom.
https://www.cabletiesandmore.ca/wire-loom-tools |
02-29-2024, 11:39 AM | #11 | |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,081
|
Re: Project: Tow-Rat (Lil' Blue)
Quote:
found these online and printing a few different sizes of them now. https://www.printables.com/model/662...esser-werkzeug |
|
02-29-2024, 10:19 AM | #12 |
Senior Member
Join Date: Oct 2014
Location: Eagle, ID
Posts: 3,015
|
Re: Project: Tow-Rat (Lil' Blue)
Wait!! You built a chassis from scratch and you are griping about pulling a few wires through your truck??? LOL. Is it just me???
|
02-29-2024, 11:15 AM | #13 | |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,081
|
Re: Project: Tow-Rat (Lil' Blue)
Quote:
generally a fabricator is allergic to electricity ya know! satisfying at completion, just not my favorite work. partially cuz ideal functionality of routing is not the same as a nice looking routing for the most part ... i end up with an internal struggle of hidden and serviceability. |
|
03-01-2024, 07:15 AM | #14 |
6>8 Plugless........
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: Project: Tow-Rat (Lil' Blue)
Have you looked at a racepak for your gauges and data logging? For the cost of the holley stuff I think the racepak might be a better option price wise.
Your air valves look like the little Larry ones I have on my truck. I'm guessing these guys bought Larry out. Unless they changed design or upgraded something inside them, plan to add some lube to your air system maybe 1 or 2x a year. I only have the 2 valve and not the 4 but they will stick some times and that sucks. Hopefully yours won't. I've had mine on the truck for a long time so maybe mine is just an old design.
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
03-01-2024, 09:04 AM | #15 | |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,081
|
Re: Project: Tow-Rat (Lil' Blue)
Quote:
i'm pretty sure they did buy Larry's yeah, or might have been a partner ... not sure. the direction do say to oil em, i'll keep that in mind. |
|
03-02-2024, 10:07 AM | #16 |
6>8 Plugless........
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: Project: Tow-Rat (Lil' Blue)
I've been happy with my dakota digital VHX clusters. The only complaint I have is last time I called for the new setup, they said 6 month wait. That was good you got instructions with your valves. I'm pretty certain I didn't. But I do like the speed of them.
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
03-04-2024, 09:17 AM | #17 |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,081
|
Re: Project: Tow-Rat (Lil' Blue)
ok, the painless harness for the win. as i started i was hesitant to reorganize or cut things, but after getting into it, that just works. as soon as i have a wiring issue with my 93 it's just getting all-new from scratch too.
i really keep feeling like i want to make a funnel scoop cut into the front/side of the hood to bath the air filter. not sticking up or out at all, just thru the bulge right above/around the filter. then here's how i ran the wiring. with no inner fenders at the moment, it's just attached to the under side of the fender at that lip. i made 2 nice big pass-thru grommets to then get behind the grill to hide the crossover and the fan relay. horn ordered, that's the green wire. i really like how all that hid really nicely behind the header latch panel. big blue wire is a ground strap. made a few different harness sections under the hood, i was worried that would look a mess but i think worked. the coil around the breather bottle are gauge sensor wires. i even put little 10-32 nutcerts in the cowl for that main harness fuse. inside had such a massive pile of wires, but they are pre-bundled. by that time i was on a roll and just started hacking. left enough for easy servicing, wound up stuff for future use n BAM. lights work, switch is fully functional. key works, starts the damn thing, and splitting the ACC and IGN sets so the fans are on with the IGN but only the air compressors are on for the ACC. i did end up hooking up the blinkers in the mid-bar in the headlights. hoping once i get the rear plugged in she'll actually flash. Last edited by 6DoF; 03-04-2024 at 09:32 AM. |
03-04-2024, 02:31 PM | #18 |
Registered User
Join Date: Mar 2007
Location: Scotts, Michigan
Posts: 3,770
|
Re: Project: Tow-Rat (Lil' Blue)
Looking good. Wiring can be such a time suck. On my bagged 48 truck build I had custom inner fenders but I used a piece of SS tube and ran the wires thru it in case my tires as to come in cant when being really low and turning. I attached thru the fender bolts holes with isolated metal/rubber claps. Worked/looked slick.
Wiring means your getting close... Marc
__________________
…………...........__________ .................. ((__|__||___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857 |
03-08-2024, 08:39 AM | #19 |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,081
|
Re: Project: Tow-Rat (Lil' Blue)
not sure why, but getting the factory rear view mirror back in after sand blast n paint was super satisfying.
the kick panel covers however ... sometimes ya just gotta "paint it black and put it back" finished getting the wiring under the truck covered and tied up, horn in, steering wheel final assembly, fuel tanks tied together with a balance hose and vent to make one big volume (19*2). getting more check marks on the list! |
03-08-2024, 08:43 AM | #20 |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,081
|
Re: Project: Tow-Rat (Lil' Blue)
|
03-08-2024, 10:26 AM | #21 |
Registered User
Join Date: Nov 2018
Location: Ishpeming, mi
Posts: 625
|
Re: Project: Tow-Rat (Lil' Blue)
Looking great. You’re making great progress. I can relate to the wiring fun. I’ve been doing it for 3+ weeks now. You’ve got to be getting close to roadworthy. Definitely anticipating completion. Keep the pictures coming!
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=780018 Jason’s 56 build |
03-15-2024, 09:18 AM | #22 |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,081
|
Re: Project: Tow-Rat (Lil' Blue)
my barn kit got delivered! i can not wait for the foundation work to start ... i really need to get this bed done so i can maybe drive this while building the shop.
got a wild hair last night after the wife went to bed, got my shifter floor seal made. printed a cut template earlier over dinner for a nice tight fit. 2 layers of 1/8" neoprene, one cut around the trans and one around the shifter, then the steel trim ring. i feel like the ring should be AL or chrome, but should i paint it white or black for now? later i think the wife plans to stitch up a boot for me too, but not needed to start driving this thing. |
03-15-2024, 09:31 AM | #23 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,105
|
Re: Project: Tow-Rat (Lil' Blue)
black for me
nice job will look great with a stitched boot |
03-18-2024, 10:27 AM | #24 |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,081
|
Re: Project: Tow-Rat (Lil' Blue)
black it is!
got the kick panel bits back in, just waiting on the vent flappers to show up to finish assembly of that stuff. factory radio delete blasted and re-painted. just don't know what to put into the last open hole, i don't have any more delete buttons ... got most of the bed mounts frame and floor side fabbed up Sunday. i really need to just get the bed sides on already! |
03-28-2024, 08:25 AM | #25 |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,081
|
Re: Project: Tow-Rat (Lil' Blue)
so a buddy came thru Pitt for work and dropped off his Miller TIG machine for me to figure out. after a lot of practice on scrap and some aggravation, i think i did pretty decent. i have a lot to learn about making it easier/cheaper for myself though. i wasted SOOO much argon. but these hold water now!
1/2gal reservoir tank for the charge cooler(s). only running one system for now, but joined the possible 2 separate cooling circuits so they can balance when i get to that point. -12an weld on bungs to make future service easy. |
Bookmarks |
|
|