![]() |
![]() |
#726 | |
Registered User
Join Date: Feb 2015
Location: concord ca
Posts: 170
|
Re: Post your C/L finds for everyone to enjoy!
All I can say is wow! but from looking at the photos my question is where does the exhaust dump? Firewall maybe, maybe its the heating system
, Quote:
|
|
![]() |
![]() |
![]() |
#727 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,503
|
Re: Post your C/L finds for everyone to enjoy!
The Exhaust dumps out in front of the cowl no doubt an open megaphone header.
It looks like someone killed off an MG Midget in the process. Add says it is sitting on a Chevy chassis.. The car almost looks like it got started by someone with big plans to build his "classic 2 seat sports car" using the MG body and Chevy chassis and probably the fenders off what ever the hood came off and failed due to a severe lack of skill out of basic first semester ag shop welding. Then some rat rod dude got their hands on it. At least that is how it looks.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
![]() |
![]() |
![]() |
#728 |
Registered User
Join Date: Sep 2014
Location: USA
Posts: 2,249
|
Re: Post your C/L finds for everyone to enjoy!
__________________
1951 Chevy Panel Truck |
![]() |
![]() |
![]() |
#729 | |
Registered User
Join Date: Feb 2010
Location: Lebanon, Ohio
Posts: 1,359
|
Re: Post your C/L finds for everyone to enjoy!
Quote:
![]()
__________________
Bob "It won't take long and it won't cost much." '55 3100 (383/700R4)--'55 Belair Sedan (350/4-speed)--'64 'Vette Conv. (327/4-speed)--'68 GTO Conv. (462/4-speed)--'69 Cutlass Conv. (350/TH350)--'06 'Vette Conv. (LS2/6-speed) Bob's Retirement Build - My 55 TF Bob's 700R4 Build (how-to) |
|
![]() |
![]() |
![]() |
#730 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,503
|
Re: Post your C/L finds for everyone to enjoy!
Way too much deliberately crude and very suspect work on that panel It looks like it could have been made into a pretty nice truck before he got his hands on it.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
![]() |
![]() |
![]() |
#731 |
Registered User
Join Date: Aug 2016
Location: Hunkered Down
Posts: 1,839
|
Re: Post your C/L finds for everyone to enjoy!
Heres 54 3600 a start for someone up in Vancouver WA
https://portland.craigslist.org/clk/...383699132.html |
![]() |
![]() |
![]() |
#732 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,503
|
Re: Post your C/L finds for everyone to enjoy!
Solid looking truck that looks like it is in Eugene.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
![]() |
![]() |
![]() |
#733 |
Registered User
Join Date: Aug 2016
Location: Hunkered Down
Posts: 1,839
|
Re: Post your C/L finds for everyone to enjoy!
Oops didn't see its been moved to Eugene!! I agree
|
![]() |
![]() |
![]() |
#734 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,503
|
Re: Post your C/L finds for everyone to enjoy!
I have a feeling that is where it has been all the time.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
![]() |
![]() |
![]() |
#735 |
Registered User
Join Date: Aug 2016
Location: Hunkered Down
Posts: 1,839
|
Re: Post your C/L finds for everyone to enjoy!
|
![]() |
![]() |
![]() |
#736 |
Post Whore
![]() Join Date: Feb 2016
Location: Portland Oregon
Posts: 11,115
|
Re: Post your C/L finds for everyone to enjoy!
Rare, and hard to find in good shape, service boxes (They look like they in good shape from what the photos show) Comes with a nice 49 too $7900! Not mine.
https://portland.craigslist.org/mlt/...373357568.html Barn find! 1949 Chevy 3100, utility Bell Telephone truck. 216 Inline 6, 4spd on floor feels tight, no seat or battery, floors are mostly rust free. Running boards in nice condition, some dents. needs new grill. Minor rust, mostly straight, compartment doors open with trays in great condition. Be a great restoration rig for a utility company, or a Flying A exhibit for your gas station. No title. Comes with bill of sale, ready to restore! Any questions, call or text. Serious inquiries only. $7,500 obo
__________________
Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. ![]() RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377 |
![]() |
![]() |
![]() |
#737 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,503
|
Re: Post your C/L finds for everyone to enjoy!
That's one for someone to restore back to it's Bell Telephone glory.
I haven't seen the truck in over 30 years but a guy in this area who had worked for Bell bought his old service truck when the company sold/traded it and restored it to show quality way back then.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
![]() |
![]() |
![]() |
#738 |
Registered User
Join Date: Sep 2014
Location: USA
Posts: 2,249
|
Re: Post your C/L finds for everyone to enjoy!
New Ebay listing. 1950 S-10 conversion. "Amazing rat rod...running and driving at one time...gets a ton of attention." Too far for me to pick up but pretty near youngrodder. Now that he has his Suburban finished, this looks like the perfect next project. The hard part is already done.
https://www.ebay.com/itm/25515492167...QAAOSwSbthU1G2
__________________
1951 Chevy Panel Truck Last edited by MiraclePieCo; 09-28-2021 at 09:15 PM. |
![]() |
![]() |
![]() |
#739 |
Registered User
Join Date: Aug 2016
Location: Hunkered Down
Posts: 1,839
|
Re: Post your C/L finds for everyone to enjoy!
What engine is that?
|
![]() |
![]() |
![]() |
#740 |
Senior Member
![]() ![]() Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,338
|
Re: Post your C/L finds for everyone to enjoy!
That thing is rough as a cob. Based on its appearance I would NOT trust everything was done properly....but I could be wrong.
I'd like to have the door as garage art though. PS: Depending on which year S10 was used it could be a 2.8 (bad) or a 4.3(good!) V6
__________________
'55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda! |
![]() |
![]() |
![]() |
#741 |
Registered User
Join Date: Aug 2016
Location: Hunkered Down
Posts: 1,839
|
Re: Post your C/L finds for everyone to enjoy!
Afraid you are correct, Its a mess.
|
![]() |
![]() |
![]() |
#742 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,503
|
Re: Post your C/L finds for everyone to enjoy!
Last time I edit this if someone notices, I can't tell what happened to that rust bucket, a lot of money to pay for a pair of 5 window quarter windows and little else that is usable. it looks like it was under water for a while.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. Last edited by mr48chev; 09-29-2021 at 03:23 AM. |
![]() |
![]() |
![]() |
#743 |
Registered User
Join Date: Apr 2010
Location: Oregon
Posts: 1,184
|
Re: Post your C/L finds for everyone to enjoy!
Another "telephone" truck
https://salem.craigslist.org/cto/d/t...378096302.html
__________________
1951 Truck, LS1/4L60 1964 Suburban, current project 2014 Silverado daily driver 1953 Westerner "canned ham" trailer, rebuilt 1974 Prowler trailer, rebuilt |
![]() |
![]() |
![]() |
#744 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,503
|
Re: Post your C/L finds for everyone to enjoy!
Those guys who are into the "work truck look" right now will be all over that one. I'd restore it right back to how it should have looked on the first day on the job with the phone company though. That would be a great one to show up at the American Truck
Historic Society events with. They had one here in 2013 with hundreds of restored trucks https://app.photobucket.com/u/mr48ch...8-65cd3b048820
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
![]() |
![]() |
![]() |
#745 |
Registered User
Join Date: Apr 2010
Location: Oregon
Posts: 1,184
|
Re: Post your C/L finds for everyone to enjoy!
Another cool one
https://portland.craigslist.org/mlt/...387121658.html
__________________
1951 Truck, LS1/4L60 1964 Suburban, current project 2014 Silverado daily driver 1953 Westerner "canned ham" trailer, rebuilt 1974 Prowler trailer, rebuilt |
![]() |
![]() |
![]() |
#746 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,503
|
Re: Post your C/L finds for everyone to enjoy!
That fire truck is one solid looking truck. It looks like a fun rig to have just to drive in local parades.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
![]() |
![]() |
![]() |
#747 |
Registered User
Join Date: Sep 2014
Location: USA
Posts: 2,249
|
Re: Post your C/L finds for everyone to enjoy!
Unfinished project, professionally built, all parts included except gauges and glass. From being an amateur hot rod builder, I am aware that this truck has far more money invested in just parts than his $9995.00 asking price. Note that the paint job alone is claimed to have cost $10,000!
https://www.ebay.com/itm/12492978722...sAAOSwK3thV8gA
__________________
1951 Chevy Panel Truck |
![]() |
![]() |
![]() |
#748 | |
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,680
|
Re: Post your C/L finds for everyone to enjoy!
Quote:
__________________
cool, an ogre smiley ![]() how to put your truck year and build thread into your signature shop air compressor timer |
|
![]() |
![]() |
![]() |
#749 | |
Registered User
Join Date: Sep 2014
Location: USA
Posts: 2,249
|
Re: Post your C/L finds for everyone to enjoy!
Bang! Sold in one day! I thought it was one heck of a deal.
Quote:
__________________
1951 Chevy Panel Truck |
|
![]() |
![]() |
![]() |
#750 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,503
|
Re: Post your C/L finds for everyone to enjoy!
There is actually seems to be such a thing as a mr_patina_head Kustom paint job but a guy would have to be a real fool to pay someone 10 K to make his truck look like a junk yard reject.
Still on that one the pretty solid body and a long parts list add up real quick to well over 10K.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
![]() |
![]() |
![]() |
Bookmarks |
|
|