Markeb01 Build Thread

[Ta2Don]

Not much to add other than agreeing with the previous comments, also I really enjoyed seeing the B17 shots... Enjoy that first test drive!!!
Posted via Mobile Device

[McMurphy]

Love the pictures of the B-17 Mark !! I bet that was just cool as hell to see that flying around our little neck of the woods

A small tid-bit of cross history that most folk dont know:
Paul Tibbets flew a B-17 in Europe, then made his stamp on history by flying the B-24 Enola Gay over Japan.
Robert Morgan flew a B-24 in combat in the Pacific, but left his stamp on history by being the pilot of the B-17 Memphis Belle.

One thing I think the world has lost with its shifting methodology of combat was some of these dichoctomies of relationshilps between the men who fight with, and against each other.
If they ever made another movie about Patton, I would hope they spent more time on his relationship with Rommel.
You know, stuff like that..... LOL

I hope you get your truck fired up ..... after you get some rest buddy !!!

[markeb01]

I like your military history observations Mike. I’ve been an amateur student of WWII history and hardware since I was about 8 years old. All of my elders served either in WWII or Korea, and most of them were Marines, so I grew up around a lot of interesting information. Over the years, I came to understand I had a much more comprehensive understanding of the period than my dad, just like my younger son knows more about Vietnam that I do. He’s always had an interest because I was there, and he’s met and talked with a lot of vets. His interest/research has broadened my own understanding.

Hanging on our “Military Wall” downstairs along with photos of all the family members that have served, is a signed lithograph of the Memphis Belle. And one of our hobbies is having my wife read historical military biographies for our mutual enjoyment. So when I hear the roar of those 4 engine heavies, I’m the first guy out the door!

I’ve wanted a direct overhead shot of a flying B17 for several years, ever since I missed my first chance when my wife took the camera on a road trip! I just think it’s cool because how many people ever get the chance to see one from that perspective, let alone capture the image.

After a bit of adjustment on the timing, the new engine was up and running this afternoon! Initially it wanted to overheat because the main power wire to the electric fan became disconnected. I quickly reconnected the fan and hosed down the radiator and kept the engine running. It quickly dropped back down to 185 and the rest of the break in period was uneventful. Sorry no pictures today. There wasn’t anything interesting happening worth shooting.

I even got the hood back on using the same technique that removed it. I took my squeeze to work in the truck tonight and man, what a blast. The idle has a nice burble to it and the engine revs very quick and easy. The new clutch is much smoother than the old one, and setting the gear drive clearance specs in the new engine made it distinctly louder. It was the first thing my wife noticed. She really loves the gear drive and the new exhaust note. It’s kind of funny that prior to the crossover pipe being added to the exhaust system, the mufflers had a real “bark” to them under sharp acceleration. That went away when the balance tube went in. With the new engine it’s back! This thing can really put out an exhaust blast now that wasn’t there with the old engine.

The hot weather we’ve been enjoying for several days is gone, and tomorrow is forecast for thunderstorms. Depending on how lousy the weather gets, I’ll get some additional video posted in the next couple of days. I should probably wait a few hundred miles before beating it up anyway, but I’ll at least get something demonstrating the sound effects.

Thanks to everyone that has had interest and followed along with this project.

[Bomp]

Congrats on one of the smooothest and cleanest engine swaps I've ever witnessed. (well, following along on the net).
Definitely learned a bunch of tips and tricks. Thanks, thanks a ton.

[65Gregg]

As always your posts make us feel like we are there handing you a wrench or screw driver. Glad everything went smooth for you!
Posted via Mobile Device

[markeb01]

Thanks for the comments guys. Here’s a quick video just to share what the new cam/idle sounds like. It sounds very cool in real life and is incredibly fun to drive! I’ll get some better footage once the engine has a few more miles on it.

http://www.youtube.com/watch?v=V_xSu...ature=youtu.be

[CRGRS 66]

Sounds awesome

[likaroc13]

Man, that sounds great Mark. Love that loping idle! Sounds like a real hot rod. Awesome job all around, & I hope you get to enjoy it trouble-free for many years to come. Can't wait to see/hear more video!

[1963c-10]

Sounds great. Congrats on the successful swap and new engine.

[da_bears_da1]

Love the lope! After hearing that I wish I was not months away from firing mine up
Posted via Mobile Device

[Ta2Don]

Love the Sound!
Quick turnaround time too!!!
Great Job Mark!

[Bomp]

Nice lope and whine from the gear drive. Very responsive when you gun it.

[1Bad62Pro/Street]

She sounds sweet!!!!!!
Congratulations Mark!

I always liked your truck!
https://www.youtube.com/watch?v=V_xSu45o6kA
Posted via Mobile Device

[markeb01]

Per Comp Cams recommendation did the post-break-in oil change. They suggest that getting all of the break-in lube out of the engine is very important. I think they might be right, as the oil was very black which was somewhat surprising on a brand new engine.

Zeroed the trip odometer so I'll know when to do the next oil change at 1,000 miles.

Discovered my right inboard tail light burned out so that was replaced. Oddly it appeared to have burned out making the lens look marbleized:



I checked the wiring and there wasn’t anything wrong that would have caused a problem. Also discovered the right parking light wasn't working. It turned out one of the terminals popped out of the connector that joins the hood harness to the firewall. The locking retainer was pulled up for a better grip, some dielectric grease was added and now everything is up and functioning again.

Now matter how much love and effort is invested in an old truck, there will always be something else demanding attention!

[markeb01]

It seems I am incapable of leaving well enough alone. The appearance of the fuel pressure regulator near the carburetor has been bothering me ever since it was first installed. It simply detracts from the vintage 327 appearance of the engine. So today I relocated it just in front of and above the fuel pump.

Here’s what it looked like this morning:



And here’s what it looks like now:



And this is the new location that won’t be seen by the casual observer:

[likaroc13]

Originally Posted by markeb01

It seems I am incapable of leaving well enough alone. The appearance of the fuel pressure regulator near the carburetor has been bothering me ever since it was first installed. It simply detracts from the vintage 327 appearance of the engine. So today I relocated it just in front of and above the fuel pump.

Good idea! It wasn't terrible before, but it definitely looks cleaner/less cluttered now.

[Ta2Don]

[1963c-10]

Looks much better lower. Great looking engine bay.

[CRGRS 66]

Tube bending is a bit of a art, and you are a bit of an artist!
It is the little things... is it not?

[markeb01]

I agree it is the little things that add up to the big differences, and I love bending tube. The first time I bent one I had no idea what I was doing, nor what would look good. I took my time and gently bent a new fuel line over my knee. It had big huge curves and looked nice and smooth. It had no kinks and I was somewhat pleased with myself - at first. Then I saw what somebody else did with some quality tools, sharp corners, and a plan. I've used up a lot of tube since then, but each exercise produced better results than the last.

[gimmy 64]

is the regulator mounted some where or is it just done with the tubing ? thanks

[markeb01]

In post number 739 above, the regulator is the chrome object with the white face pressure gauge near the carburetor inlet. In the 3rd photo, I relocated it down in front of the fuel pump.

Unfortunately, for the first time in nearly 50 years of doing hard lines, I had to completely redesign the fuel pump to carb layout I just fabricated. I simply could not get the setup to stop leaking. Gasoline kept dripping off the bottom of the pump, and I could not determine where it was coming from. Checking the bottom of each line with a piece of paper towel - none had any gas on it, but gas kept dripping off the bottom of the pump. I redid every tubing flare, and every brass fitting, and the pump continued to drip. So I pulled the new pump and replaced it as well. I thought maybe I cracked the outlet housing. The new pump leaked exactly as the other one did!

So I threw in the towel, pulled everything off today and made a much more simplified arrangement mounting the regulator at the top of the vertical line coming off the pump. I also added an inconspicuous bracket to the cylinder head, eliminating any vibration at the pressure regulator, and routed the upper line straight forward from the carb inlet before dropping to line up with the regulator output. This provides more working clearance for the choke connections and wrenching on the distributor hold down.

Everything works perfectly now, although I still have no idea why it leaked in the first place.





I’m hoping this is it for a while as I’m getting pretty burned out doing the same thing over and over.

I also lost my Moon Equipped decal on the back window. It was added to somewhat conceal the camera mount on the back window. I was washing the truck the other night and when I started rinsing off the back window, I realized the top half of the Moon eyes were gone. Within minutes the rest had blown off as well. I found this surprising as I had the same decals on the front fenders for a couple of years and they held up great to repeated washings. Perhaps they just don’t stick to glass as well as they do to paint.

Being an old Jarhead I’m thinking of replacing the lost decal with a gold foil USMC sticker instead. They’re actually a very thin metal, are impervious to just about anything, and I like the way they look. This is an old wrinkled sticker and the photo doesn’t do it justice. Everything except the white is highly reflective:

[likaroc13]

Originally Posted by markeb01

I also lost my Moon Equipped decal on the back window. It was added to somewhat conceal the camera mount on the back window. I was washing the truck the other night and when I started rinsing off the back window, I realized the top half of the Moon eyes were gone. Within minutes the rest had blown off as well. I found this surprising as I had the same decals on the front fenders for a couple of years and they held up great to repeated washings. Perhaps they just don’t stick to glass as well as they do to paint.

Being an old Jarhead I’m thinking of replacing the lost decal with a gold foil USMC sticker instead. They’re actually a very thin metal, are impervious to just about anything, and I like the way they look. This is an old wrinkled sticker and the photo doesn’t do it justice. Everything except the white is highly reflective:

The new regulator mounting & lines still look good. Sucks that it leaked on you like that. Sucks about your decal as well. The USMC sticker would look cool. If you're not dead set on using it though, I have the exact same Moon Equipped decal. I bought two sets for my old S-10 a while back, but I didn't use the Moon Equipped ones. I'm pretty sure they're the 4" version. Don't mind throwing one in the mail for ya, if you want? Not sure if it'd hold up any better, but it's odd that your other one came off so easy.

[markeb01]

Thanks so much for the kind offer. I still have one more pair of the same Moon Equipped decals. I also bought 2 sets several years ago. I may just clean the window real good and put another one of those back on and see if holds up better.

Although I'm proud of being a Marine, historically I've avoided slapping any USMC advertising on any of my vehicles. I'd rather be known for what I contribute or represent today than for the deeds of my youth 40+ years ago. So even though I've ordered the stickers, they may or may not make it on the truck. Either way, your consideration is greatly appreciated.

[Ta2Don]

New location for Regulator is Clean... As always, I enjoy popping in to see what you've been up to. Great work, Keep it up!