1966 SBBW pro street - Page 30 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wutnxt · 05-29-2012, 10:28 PM

Quote:

Originally Posted by 65Pickup

Very nice, great progress...you'll be driving soon...at least there's rain so shop work is perfectly timed.
I may have missed the parts list, LS2 from a Trailblazer, what are the front and rear assemblies and any aftermarket kits? Looks like Vette rear, custom install?? Thanks gonna be a fun summer!!

================================================
Well the LS2 is out of a trail blazer and rated at 395 HP with a 480 4 speed automatic behind it.....the front and rear is a c-4 corvette donor thing going on. I bought the mounting kit from flat out.....then when we started to mount it ....it was going to sit up to high.....so we took the kit and inset it into the frame to lower it more. Now back to the LS2...It's the same LS2 as what is in the corvette but the trailblazer has a different intake/runner and fuel rails. So we picked up a corvette intake for it and are just getting down to the pulley's now....trying to raise the A/C and the power steering pump up higher to help the set up sit in lower. Might be looking at the new caddy set up but still not sure.

wutnxt · 05-29-2012, 10:29 PM

Quote:

Originally Posted by chad64chevy

the 58 looks good! so what are you going to do once you get all your trucks done?? buy and sell some more!!

Drive the crap out of them all.......LOL

wutnxt · 05-29-2012, 10:31 PM

Quote:

Originally Posted by Dieselwrencher

Very nice dude!

I wanna drive it or fathersday......no pressure.....lol

wutnxt · 05-29-2012, 10:35 PM

Well .....we managed to get bags into all that c4 stuff....not alot of drop but I think it's awesome....

**Dieselwrencher** · 05-29-2012, 11:59 PM

Quote:

Originally Posted by wutnxt

I wanna drive it or fathersday......no pressure.....lol

I wish you luck dude!

wutnxt · 05-30-2012, 12:03 AM

Quote:

Originally Posted by Dieselwrencher

I wish you luck dude!

Then the tranny hits the floor.....so it needs a small tranny tunnel.....ugh...nothing is never easy lately....

wutnxt · 06-05-2012, 09:35 AM

Well it's going to be a rough week.....

The 58 has a big list on the fly....and it's in rush mode because I want it finished for fathers day...

The 65 big window street truck ....well I dropped the chassis off at the body shop to trial fit the cab before paint to make sure we are all good with it before paint. The cab should be ready, the firewall and dash changes are all complete. So it's a trail fit for all thefront end stuff now.
The pro truck.....well I have been so busy with everything else that I didn't have time to do the kind of work that needed to be done on it. So it was a hour here and there and it just wasn't what it should be. But....we should be back on it really soon, it's pulled off the rack at the body shop and headed for the floor to get back into mock up mode.

wutnxt · 06-12-2012, 03:00 PM

Well the street truck actually has some paint and the front end on it.....which is pretty exciting.....but I can't lie I have been spending my time mostly on the 58 which is almost ready to rumble...

kvn1011 · 06-12-2012, 04:49 PM

Wow!! that looks good, from the paint to the wheels, it looks perfect in my eyes!!
eye candy

Posted via Mobile Device

Dinos63 · 06-12-2012, 04:54 PM

wow very cool!! nice work brotha

FRENCHBLUE72 · 06-12-2012, 05:06 PM

58 looks great!!!
Posted via Mobile Device

ratty 46 · 06-12-2012, 07:17 PM

The eight looks great ... the wheel combo & the way they are inset MAKE the look.

R46

66farmer · 06-12-2012, 08:02 PM

I like your wheels, what are they and what size.
Thanks

wutnxt · 06-12-2012, 11:46 PM

Quote:

Originally Posted by Dinos63

wow very cool!! nice work brotha

Dude i learned everything i know from watching you........lol

wutnxt · 06-12-2012, 11:52 PM

Okay so ....

The tire and wheels...well while we were working on the 58 across the shop was sitting this nice black corvette.....The Arc Audio corvette.....wicked....stunning...SEMA car that is getting some killer new upgrades. So uhm some one got the idea that the bolt pattern was right and they might look okay if the offset worked out so we could get a idea atleast. Long story short version....corvette up on blocks....58 down on the ground with wheels...you do the math...lol. So the wheels are still a deal in process...but I love'em

**Dieselwrencher** · 06-12-2012, 11:59 PM

The 58 looks awesome! That is a sweet IH 4700 in the back too!

wutnxt · 06-13-2012, 12:03 AM

Quote:

Originally Posted by Dieselwrencher

The 58 looks awesome! That is a sweet IH 4700 in the back too!

Dude it's bagged....has 4 link....The back wall of the sleeper is 1" thick clear lexan and encloses oh about 16 subs that are 12" it's turbo'd and cranked...You would love it

**Dieselwrencher** · 06-13-2012, 12:04 AM

Quote:

Originally Posted by wutnxt

Dude it's bagged....has 4 link....The back wall of the sleeper is 1" thick clear lexan and encloses oh about 16 subs that are 12" it's turbo'd and cranked...You would love it

Big pimpin!

wutnxt · 06-13-2012, 12:06 AM

Well....

I wasn't going to put abunch of the 58 pics up here....but...I really love the way it's going together. It's kind of barn find with out the patina, it was sitting painted in a warehouse for about 15 years....the paints not great but I love the way it looks...

**Dieselwrencher** · 06-13-2012, 03:33 PM

Looks awesome! Now get it running!

wutnxt · 06-15-2012, 10:57 AM

Quote:

Originally Posted by Dieselwrencher

Looks awesome! Now get it running!

I have a few more things to finish off before we fire it up.....

-Going to have to make the rad hoses out of stainless
-Waiting for the flaming river shifter cable and gear selector stuff
-Wire the truck.....
-Wire the engine harness ( there sure alot of wires in there )
- Fuel tank needs to be finished...

In other words there is a $hit of work left to do yet.....and the street truck will be home for next week for entire assembley....Man i need more friends...lol

**Dieselwrencher** · 06-15-2012, 03:43 PM

Quote:

Originally Posted by wutnxt

In other words there is a $hit of work left to do yet.....and the street truck will be home for next week for entire assembley....Man i need more friends...lol

Fly me up there buddy!

wutnxt · 06-15-2012, 03:45 PM

Quote:

Originally Posted by Dieselwrencher

Fly me up there buddy!

You just wanna check out the beer fridge........lol

**Dieselwrencher** · 06-15-2012, 03:49 PM

Quote:

Originally Posted by wutnxt

You just wanna check out the beer fridge........lol

Yeah so? But I know it CAN'T be done yet. LMAO!

wutnxt · 06-15-2012, 04:28 PM

Quote:

Originally Posted by Dieselwrencher

Yeah so? But I know it CAN'T be done yet. LMAO!

Dude.....one of these days alice to the moon.....lol

05-29-2012, 10:35 PM	#729
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: 1966 SBBW pro street Well .....we managed to get bags into all that c4 stuff....not alot of drop but I think it's awesome.... __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details

06-05-2012, 09:35 AM	#732
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: 1966 SBBW pro street Well it's going to be a rough week..... The 58 has a big list on the fly....and it's in rush mode because I want it finished for fathers day... The 65 big window street truck ....well I dropped the chassis off at the body shop to trial fit the cab before paint to make sure we are all good with it before paint. The cab should be ready, the firewall and dash changes are all complete. So it's a trail fit for all thefront end stuff now. The pro truck.....well I have been so busy with everything else that I didn't have time to do the kind of work that needed to be done on it. So it was a hour here and there and it just wasn't what it should be. But....we should be back on it really soon, it's pulled off the rack at the body shop and headed for the floor to get back into mock up mode. __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details

06-12-2012, 03:00 PM	#733
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: 1966 SBBW pro street Well the street truck actually has some paint and the front end on it.....which is pretty exciting.....but I can't lie I have been spending my time mostly on the 58 which is almost ready to rumble... Attached Images __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details

06-12-2012, 04:49 PM	#734
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: 1966 SBBW pro street Wow!! that looks good, from the paint to the wheels, it looks perfect in my eyes!! eye candy Posted via Mobile Device __________________ My Build Thead (Project Slow Motion)

06-12-2012, 04:54 PM	#735
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: 1966 SBBW pro street wow very cool!! nice work brotha __________________ CHEVY ONLY... Nothin Else !

06-12-2012, 05:06 PM	#736
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: 1966 SBBW pro street 58 looks great!!! Posted via Mobile Device __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-12-2012, 07:17 PM	#737
ratty 46 Registered User Join Date: Jun 2009 Location: Atlanta, Ga. Posts: 1,104	Re: 1966 SBBW pro street The eight looks great ... the wheel combo & the way they are inset MAKE the look. R46

06-12-2012, 08:02 PM	#738
66farmer Registered User Join Date: Jun 2007 Location: North Plains Oregon Posts: 684	Re: 1966 SBBW pro street I like your wheels, what are they and what size. Thanks

06-12-2012, 11:52 PM	#740
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: 1966 SBBW pro street Okay so .... The tire and wheels...well while we were working on the 58 across the shop was sitting this nice black corvette.....The Arc Audio corvette.....wicked....stunning...SEMA car that is getting some killer new upgrades. So uhm some one got the idea that the bolt pattern was right and they might look okay if the offset worked out so we could get a idea atleast. Long story short version....corvette up on blocks....58 down on the ground with wheels...you do the math...lol. So the wheels are still a deal in process...but I love'em __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details

06-12-2012, 11:59 PM	#741
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 1966 SBBW pro street The 58 looks awesome! That is a sweet IH 4700 in the back too! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

06-13-2012, 12:06 AM	#744
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: 1966 SBBW pro street Well.... I wasn't going to put abunch of the 58 pics up here....but...I really love the way it's going together. It's kind of barn find with out the patina, it was sitting painted in a warehouse for about 15 years....the paints not great but I love the way it looks... Attached Images __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details

06-13-2012, 03:33 PM	#745
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 1966 SBBW pro street Looks awesome! Now get it running! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.