What did you do to your truck today? - Page 301 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jayoldschool** · 04-20-2013, 08:31 PM

Quote:

Originally Posted by 62 Barnfind

Installed my door handles and gas cap.

Where did you get the cab and the fill neck gasket? I need new ones.

62 Barnfind · 04-20-2013, 08:52 PM

Quote:

Originally Posted by 1964Chevy

Kileen Texas? Are you an Army guy? Thanks for the link.

Quote:

Originally Posted by jayoldschool

Where did you get the cab and the fill neck gasket? I need new ones.

1964 chevy: Yes I am in the Army. I'm a 1SG 23 + years MOS 91Z.

Jay old school: I got the from classic parts. Here is the link.

http://www.classicparts.com/Gas-Tanks/products/191/

Alan's Classic · 04-20-2013, 10:24 PM

Drove it to the my first cruise of the year.

SCHRUMGMC · 04-20-2013, 10:35 PM

Like the Black Top

Alan's Classic · 04-20-2013, 11:18 PM

Quote:

Originally Posted by SCHRUMGMC

Like the Black Top

If your referring to my roof, thanks. It's actually silver metallic. The pic is deceiving.
Posted via Mobile Device

SCHRUMGMC · 04-20-2013, 11:20 PM

Quote:

Originally Posted by Alan's Classic

If your referring to my roof, thanks. It's actually silver metallic. The pic is deceiving.
Posted via Mobile Device

I apologize, first glance looked Black..Awesome truck bud

Ta2Don · 04-20-2013, 11:25 PM

Quote:

Originally Posted by Alan's Classic

Drove it to the my first cruise of the year.

Lookin Good!!!

MikeS. · 04-21-2013, 12:56 AM

Drove mine, the MH, 70 miles each way to a cruise in. The farthest I've taken it so far. I found out a few things. 1 the front gas tank leaks pretty good. 2 the radiator overflows and there isn't a recovery bottle, yet. 3 it handled the mtns around here pretty well.
Posted via Mobile Device

Narxoleptic Customs · 04-21-2013, 12:56 AM

2 items off the list!! Remounted the front bumper and did the floor and firewall w sound deadener!!

Posted via Mobile Device

keeks69 · 04-21-2013, 12:00 PM

Starting to prime

Bigru · 04-21-2013, 12:07 PM

Mounted my new master cylinder.
Posted via Mobile Device

steveb64 · 04-21-2013, 12:28 PM

Installed my newly ceramic coated headers on my 500 Cadillac engine in my 64 step. Fine tuned the timing and took it for a spin. Ready to go to the exhaust shop.

66-PMD-GMC · 04-21-2013, 01:22 PM

Quote:

Originally Posted by steveb64

Installed my newly ceramic coated headers on my 500 Cadillac engine in my 64 step. Fine tuned the timing and took it for a spin. Ready to go to the exhaust shop.

That is a sweet motor in that truck...
Would love to see it posted in my creative power plants thread..

lowslow64 · 04-21-2013, 02:51 PM

Thanks, Paint is Hot Rod Flatz Copper pearl metalic, scallops and top are black base with gunmetal flake with a touch of red flake and then cleared. The rest is hand pinstriped.

**joedoh** · 04-21-2013, 05:08 PM

doing the driveway relearn procedure on a new column and key to see if that is why my truck wont start

markeb01 · 04-21-2013, 06:14 PM

That looks so cool! I imagine a torque monster powerplant will be a lot of fun to drive.

Quote:

Originally Posted by steveb64

Installed my newly ceramic coated headers on my 500 Cadillac engine in my 64 step. Fine tuned the timing and took it for a spin. Ready to go to the exhaust shop.

**rideblue00** · 04-21-2013, 08:25 PM

put on some new s/s brake lines!

markeb01 · 04-21-2013, 11:28 PM

Nicely formed. Very neat looking.

Ta2Don · 04-21-2013, 11:57 PM

Quote:

Originally Posted by rideblue00

put on some new s/s brake lines!

Very Nice!!!

Snowbound · 04-22-2013, 02:26 AM

Fought with my new custom length MSD plug wires before almost throwing the crimpers across the shop. I've never built wires before.

Tried a bit of dielectric grease, then WD40 to lube the boots. Still can't get them to slide back over the terminal.

The YouTube looks so easy....what is the trick?
Posted via Mobile Device

racecougar · 04-22-2013, 09:49 AM

Done with the passenger side of the cab...onto the driverside!

tincan1966 · 04-22-2013, 12:42 PM

So far today, on the '65 Daily Driver project.-I've got the front end lowered about 2 1/2" with a different set of springs. Only took about 1/2 hour, since didn't have to knock loose any ball joints or anything. Just unbolted the shocks, removed upper control arm nuts, lowered spindle down as far as brake hose would let me, removed the springs, installed new springs and bolted it back up. Easiest I've ever lowered the front of one of these..
After lunch, going to relocate the fuel tank, run an electrical check with the new steering column hooked up to check turn signals, horn and hazard lights.

May get around to actually putting the hood on and making it look like a truck again!, LOL.

Vernski · 04-22-2013, 01:11 PM

Quote:

Originally Posted by Snowbound

Fought with my new custom length MSD plug wires before almost throwing the crimpers across the shop. I've never built wires before.

Tried a bit of dielectric grease, then WD40 to lube the boots. Still can't get them to slide back over the terminal.

The YouTube looks so easy....what is the trick?
Posted via Mobile Device

Snowbound put the boots on first then crimp the ends, works every time...Vernski

Snowbound · 04-22-2013, 03:41 PM

Quote:

Originally Posted by Vernski

Snowbound put the boots on first then crimp the ends, works every time...Vernski

That's the way I did it! I think it is due to the 90 degree boots, they won't slide back over the terminal.

My speed shop guy say crimp the end on, then slide the boot over. Will give that a try. I have lots of beer on hand just in case!
Posted via Mobile Device

Vernski · 04-23-2013, 01:20 AM

Quote:

Originally Posted by Snowbound

That's the way I did it! I think it is due to the 90 degree boots, they won't slide back over the terminal.

My speed shop guy say crimp the end on, then slide the boot over. Will give that a try. I have lots of beer on hand just in case!
Posted via Mobile Device

Isn't that the way you already tried it? get some wires w/the boots on them instead, in any case lots of beer will solve the problem Eah...Vernski

04-20-2013, 10:24 PM	#7503
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: What did you do to your truck today? Drove it to the my first cruise of the year. Attached Images __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

04-20-2013, 10:35 PM	#7504
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: What did you do to your truck today? Like the Black Top __________________ 1971 GMC Sierra 1959 GMC 100

04-21-2013, 12:56 AM	#7508
MikeS. Registered User Join Date: Sep 2011 Location: FarEastern WVa Posts: 1,691	Re: What did you do to your truck today? Drove mine, the MH, 70 miles each way to a cruise in. The farthest I've taken it so far. I found out a few things. 1 the front gas tank leaks pretty good. 2 the radiator overflows and there isn't a recovery bottle, yet. 3 it handled the mtns around here pretty well. Posted via Mobile Device __________________ Past Master Triluminar Lodge #117 GL of WVa My 1963 4x4 Suburban build; http://67-72chevytrucks.com/vboard/s...d.php?t=531274 My Gallery, now with pics of my 1966 C30 motorhome. http://67-72chevytrucks.com/gallery/...&ppuser=103447

04-21-2013, 12:56 AM	#7509
Narxoleptic Customs Registered User Join Date: Dec 2011 Location: Blytheville/Bentonville, AR Posts: 393	Re: What did you do to your truck today? 2 items off the list!! Remounted the front bumper and did the floor and firewall w sound deadener!! Posted via Mobile Device

04-21-2013, 12:00 PM	#7510
keeks69 Registered User Join Date: Feb 2013 Location: Port Huron Michigan Posts: 37	Re: What did you do to your truck today? Starting to prime Attached Images

04-21-2013, 12:07 PM	#7511
Bigru Registered User Join Date: Mar 2013 Location: Missouri City, Tx Posts: 321	Re: What did you do to your truck today? Mounted my new master cylinder. Posted via Mobile Device Attached Images

04-21-2013, 12:28 PM	#7512
steveb64 Registered User Join Date: Oct 2009 Location: Moline, IL Posts: 157	Re: What did you do to your truck today? Installed my newly ceramic coated headers on my 500 Cadillac engine in my 64 step. Fine tuned the timing and took it for a spin. Ready to go to the exhaust shop. Attached Images

04-21-2013, 02:51 PM	#7514
lowslow64 Registered User Join Date: Dec 2009 Location: Rockwall Texas Posts: 79	Re: What did you do to your truck today? Thanks, Paint is Hot Rod Flatz Copper pearl metalic, scallops and top are black base with gunmetal flake with a touch of red flake and then cleared. The rest is hand pinstriped. Attached Images

04-21-2013, 05:08 PM	#7515
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,774	Re: What did you do to your truck today? doing the driveway relearn procedure on a new column and key to see if that is why my truck wont start __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

04-21-2013, 08:25 PM	#7517
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,860	Re: What did you do to your truck today? put on some new s/s brake lines! Attached Images

04-21-2013, 11:28 PM	#7518
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: What did you do to your truck today? Nicely formed. Very neat looking. __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

04-22-2013, 02:26 AM	#7520
Snowbound Registered User Join Date: Aug 2002 Location: Westbank, BC Posts: 403	Re: What did you do to your truck today? Fought with my new custom length MSD plug wires before almost throwing the crimpers across the shop. I've never built wires before. Tried a bit of dielectric grease, then WD40 to lube the boots. Still can't get them to slide back over the terminal. The YouTube looks so easy....what is the trick? Posted via Mobile Device __________________ 1965 Chevy Short Box Stepside, 230 - 3 speed, 4:11 gears, original paint rust free survivor. Now sporting a 383 SBC and TKO-600

04-22-2013, 09:49 AM	#7521
racecougar Registered User Join Date: Jan 2013 Location: Imperial, MO Posts: 1,003	Re: What did you do to your truck today? Done with the passenger side of the cab...onto the driverside! __________________ Rod @ AzzKicker Cars 1965 C10 SWB - Build Thread

04-22-2013, 12:42 PM	#7522
tincan1966 Registered User Join Date: Oct 2010 Location: Independence,KS Posts: 1,477	Re: What did you do to your truck today? So far today, on the '65 Daily Driver project.-I've got the front end lowered about 2 1/2" with a different set of springs. Only took about 1/2 hour, since didn't have to knock loose any ball joints or anything. Just unbolted the shocks, removed upper control arm nuts, lowered spindle down as far as brake hose would let me, removed the springs, installed new springs and bolted it back up. Easiest I've ever lowered the front of one of these.. After lunch, going to relocate the fuel tank, run an electrical check with the new steering column hooked up to check turn signals, horn and hazard lights. May get around to actually putting the hood on and making it look like a truck again!, LOL.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.