What did you do to your truck today? - Page 306 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ChevyJr** · 05-09-2013, 11:27 AM

Cleaned up the 700r4 I'm swapping into my '65

robber grin · 05-09-2013, 11:38 AM

Having installed the TH350C on the 283 in my 62 C10 day or so ago - last night after some thought and scrounging for steel I went to work on a rear crossmember for the tail shaft mount.

I cut the original standard crossmember down and came up with this piece.

Hope to put it in tonight...
rg

CRGRS 66 · 05-09-2013, 12:35 PM

Quote:

Originally Posted by WCHLVR

Make this my first post-

Installed some 64 Cadillac Hub Caps on my new 64 Custom. If you know about Caddy caps you know this is not any easy task! LOL

As you can see I also took off the All Terrains in favor of some passenger car tires. 3" whites coming soon!

Nice Truck, caps look good on there, welcome aboard!!

CRGRS 66 · 05-09-2013, 12:36 PM

Quote:

Originally Posted by racecougar

Pulled the stock sixxer and three-speed. Once I get the rust repair on the cab finished up, we'll take it down to a bare frame.

Is it just me? Your truck looks like it is leaning significantly to the passenger side...

WCHLVR · 05-09-2013, 02:46 PM

Quote:

Originally Posted by dantimdad

Nice truck!

Welcome to the board!

I would have never thought hubcaps would work those rims.

Steven

Quote:

Originally Posted by CRGRS 66

Nice Truck, caps look good on there, welcome aboard!!

Thanks for the props folks. Yeah... it took a little creative engineering to make the caps happen. Super pleased with the results though!

racecougar · 05-09-2013, 03:38 PM

Quote:

Originally Posted by CRGRS 66

Is it just me? Your truck looks like it is leaning significantly to the passenger side...

The frame is level, but the cab is absolutely leaning, as I'm in the middle of replacing the floor pans, cab supports, door pillars, rocker panel, cab corner, etc on the driverside...it's all in my build thread.

robber grin · 05-10-2013, 09:26 AM

Welcome home WCHLVR!

Many many build pics are appreciated...
rg

T2vigil · 05-10-2013, 11:33 AM

One headlight connector later I finally got all of the lights working as they should including the "Bright Lights" in the instrument panel. Now I have no issues with driving at night.

Blue_Aura · 05-10-2013, 11:42 AM

Quote:

Originally Posted by T2vigil

One headlight connector later I finally got all of the lights working as they should including the "Bright Lights" in the instrument panel. Now I have no issues with driving at night.

What do you mean by "bright lights"? Please explain and provide part numbers. Thanks
Posted via Mobile Device

WCHLVR · 05-10-2013, 01:27 PM

Quote:

Originally Posted by robber grin

Welcome home WCHLVR!

Many many build pics are appreciated...
rg

Thanks RG. As I get a little further into her I will make up a build thread for her!

T2vigil · 05-10-2013, 03:20 PM

Quote:

Originally Posted by Blue_Aura

What do you mean by "bright lights"? Please explain and provide part numbers. Thanks
Posted via Mobile Device

On the dash there is a lamp that lights when the dimmer switch turns on the bright lights. On my truck there is a piece of red plastic the has "Bright Lights" written on it. When the bright lights are turned on the lamp shows through the red plastic to iluminate the "Bright Lights" indication. Sorry I do not have any part number.

Blue_Aura · 05-11-2013, 01:40 AM

Went for a 3 hour round trip drive to go pick up some TJ springs for $10.

Sanded down my air cleaner that was going to be matched to the blue metallic paint on my engine. I had to change up my scheme for the valve covers and air cleaner since the masking job turned out to be a nightmare!
Posted via Mobile Device

coulter · 05-11-2013, 02:10 AM

modded one of my trailing arms

trimmed it for better clearance
stretched 1" to center up the wheels in the wheelwell when laid out
took 6degrees of angle out for better pinion angle when driving low

donthekawguy · 05-11-2013, 02:29 AM

Quote:

Originally Posted by coulter

modded one of my trailing arms

trimmed it for better clearance
stretched 1" to center up the wheels in the wheelwell when laid out
took 6degrees of angle out for better pinion angle when driving low

Very nice! Now I feel bad cuz I just powder coated mine.

coulter · 05-11-2013, 01:25 PM

luckly mine were only spray painted hahaha

ACK · 05-11-2013, 03:35 PM

Although me and the engine weren't seeing eye to eye, got the oil pan out today. Next step is cleaning the pan really good and painting it. Also got my parts to reconnect the transmission and new connectors for the transmission cooler hoses. The parts place even put bubble flares on them to help keep the hoses in place nice and snug.

**JPBrecheisen** · 05-11-2013, 09:53 PM

got my new tires mounted to the slot mags and installed.

TJ's Chevy · 05-11-2013, 10:06 PM

I hauled a bunch of wood in mine today. Nice tires ya got there J. B. I sure could use a set!

**jayoldschool** · 05-11-2013, 10:22 PM

Drove seven hours round trip to pick up a set of wheels that will fit my stock hubcaps!

**JPBrecheisen** · 05-11-2013, 10:25 PM

Quote:

Originally Posted by T.J. MCCAULEY

I hauled a bunch of wood in mine today. Nice tires ya got there J. B. I sure could use a set!

Thanks. Best ones out there are the ones you can still use and not worry about scratching.

1Bad62Pro/Street · 05-11-2013, 11:32 PM

Starting on the drivers side door now.

Project: "Full Metal Yellow Jacket" Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=321173

Vernski · 05-12-2013, 03:35 AM

Starting on the drivers side door now.

Doors lookin cool, will they be electric?...Vernski

TxRat · 05-12-2013, 04:20 PM

Repaired some rust in the floors today

robber grin · 05-12-2013, 06:58 PM

Installed my modified 83 GMC factory AT shift linkage, then installed the new U-Joints, and newly painted driveshaft.

Put my 62 in "Park" for probably first time ever - it was a 3 speed truck originally and PO had gone to a toploader before it came to me.

Swapped out the rear wheels - so all four match now.

rg

1964Chevy · 05-12-2013, 09:45 PM

Realized that if I turn my a/c on then off the electric rad fan will not come on until I turn the truck off and start it again, aaaarrrggghhh. I reckon I'm taking this electric fan out and putting the mechanical one back in, only with a fan clutch this time......

05-09-2013, 11:27 AM	#7626
ChevyJr Junior Member Join Date: Feb 2013 Location: Minneapolis Posts: 87	Re: What did you do to your truck today? Cleaned up the 700r4 I'm swapping into my '65 Attached Images

05-09-2013, 11:38 AM	#7627
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: What did you do to your truck today? Having installed the TH350C on the 283 in my 62 C10 day or so ago - last night after some thought and scrounging for steel I went to work on a rear crossmember for the tail shaft mount. I cut the original standard crossmember down and came up with this piece. Hope to put it in tonight... rg Attached Images

05-10-2013, 09:26 AM	#7632
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: What did you do to your truck today? Welcome home WCHLVR! Many many build pics are appreciated... rg

05-10-2013, 11:33 AM	#7633
T2vigil Registered User Join Date: Jan 2010 Location: Evensville, TN Posts: 236	Re: What did you do to your truck today? One headlight connector later I finally got all of the lights working as they should including the "Bright Lights" in the instrument panel. Now I have no issues with driving at night.

05-11-2013, 01:40 AM	#7637
Blue_Aura Registered User Join Date: Aug 2012 Location: Tracy, CA Posts: 251	Re: What did you do to your truck today? Went for a 3 hour round trip drive to go pick up some TJ springs for $10. Sanded down my air cleaner that was going to be matched to the blue metallic paint on my engine. I had to change up my scheme for the valve covers and air cleaner since the masking job turned out to be a nightmare! Posted via Mobile Device __________________ Current Vehicles: '62 C10 - 350 (current project), '03 Tahoe (C Series) Some Past Projects: '69 Nova - 350 , '70 1/2 Camaro Z28 - LT1 350, '73 K20 Full-time 4x4 - 400 SB, '77 1/2 Camaro Z28 - 350, '84 Camaro Z28 - 305, '68 Buick - 430 BB

05-11-2013, 02:10 AM	#7638
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: What did you do to your truck today? modded one of my trailing arms trimmed it for better clearance stretched 1" to center up the wheels in the wheelwell when laid out took 6degrees of angle out for better pinion angle when driving low Attached Images __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918

05-11-2013, 01:25 PM	#7640
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: What did you do to your truck today? luckly mine were only spray painted hahaha __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918

05-11-2013, 03:35 PM	#7641
ACK Registered User Join Date: Oct 2012 Location: Philly, PA Posts: 540	Re: What did you do to your truck today? Although me and the engine weren't seeing eye to eye, got the oil pan out today. Next step is cleaning the pan really good and painting it. Also got my parts to reconnect the transmission and new connectors for the transmission cooler hoses. The parts place even put bubble flares on them to help keep the hoses in place nice and snug. __________________ My truck ain't dead, it just smells funny.

05-11-2013, 09:53 PM	#7642
JPBrecheisen Senior Member Join Date: Jul 2012 Location: Harrisville, New York Posts: 459	Re: What did you do to your truck today? got my new tires mounted to the slot mags and installed. Attached Images __________________ 1960 GMC K1500 LB Fleet Side 1962 GMC K1000 LB Step Side 1988 Chevrolet C2500

05-11-2013, 10:06 PM	#7643
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What did you do to your truck today? I hauled a bunch of wood in mine today. Nice tires ya got there J. B. I sure could use a set!

05-11-2013, 10:22 PM	#7644
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,168	Re: What did you do to your truck today? Drove seven hours round trip to pick up a set of wheels that will fit my stock hubcaps!

05-11-2013, 11:32 PM	#7646
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: What did you do to your truck today? Starting on the drivers side door now. Project: "Full Metal Yellow Jacket" Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=321173 __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

05-12-2013, 03:35 AM	#7647
Vernski Registered User Join Date: May 2009 Location: Rathdrum, Idaho Posts: 1,135	Re: What did you do to your truck today? Starting on the drivers side door now. Doors lookin cool, will they be electric?...Vernski

05-12-2013, 04:20 PM	#7648
TxRat Registered User Join Date: Dec 2010 Location: Beaumont Texas Posts: 190	Re: What did you do to your truck today? Repaired some rust in the floors today

05-12-2013, 06:58 PM	#7649
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: What did you do to your truck today? Installed my modified 83 GMC factory AT shift linkage, then installed the new U-Joints, and newly painted driveshaft. Put my 62 in "Park" for probably first time ever - it was a 3 speed truck originally and PO had gone to a toploader before it came to me. Swapped out the rear wheels - so all four match now. rg Attached Images Last edited by robber grin; 05-12-2013 at 07:08 PM. Reason: dumped blurred photo for better one



Register or Log In To remove these advertisements.

05-12-2013, 09:45 PM	#7650
1964Chevy Registered User Join Date: Jan 2012 Location: Denton, Texas Posts: 92	Re: What did you do to your truck today? Realized that if I turn my a/c on then off the electric rad fan will not come on until I turn the truck off and start it again, aaaarrrggghhh. I reckon I'm taking this electric fan out and putting the mechanical one back in, only with a fan clutch this time...... __________________ If your strength is small, don't carry heavy burdens. If your words are worthless, don't give advice. Chinese Proverb

Register or Log In To remove these advertisements.