Vintage Air Sale - Page 31 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Scottshotrods · 07-14-2014, 02:28 PM

Quote:

Originally Posted by 1SICMAX

How much for 71 blazer non ac cab with a lq4 shipped 93610?

p/m sent

Justin

boynton · 07-16-2014, 12:34 AM

Looking for info/pricing i have a '72 Chevrolet factory air cab with a 2009 ly6 truck 6.0 I have the ability to adapt line or make lines if this makes a difference. I have the motor mounted with the stock a/c compressor and would like to use it. Also have the factory a/c controller but will need new flex hose under the dash.

Scottshotrods · 07-16-2014, 11:59 AM

Quote:

Originally Posted by boynton

Looking for info/pricing i have a '72 Chevrolet factory air cab with a 2009 ly6 truck 6.0 I have the ability to adapt line or make lines if this makes a difference. I have the motor mounted with the stock a/c compressor and would like to use it. Also have the factory a/c controller but will need new flex hose under the dash.

p/m sent

justin

72 burban · 07-19-2014, 05:35 PM

Price on unit for 72 suburban sb with factory air

Thanks aron

Dakotachevy68 · 07-21-2014, 08:35 AM

I'm looking for pricing for a 1968 c20

Scottshotrods · 07-21-2014, 07:03 PM

Quote:

Originally Posted by 72 burban

Price on unit for 72 suburban sb with factory air

Thanks aron

P/m sent

Justin

Scottshotrods · 07-21-2014, 07:07 PM

Quote:

Originally Posted by Dakotachevy68

I'm looking for pricing for a 1968 c20

p/m sent

Justin

joesgreen67 · 07-30-2014, 11:51 AM

I sent you a PM...request for quote

Thank you!

rcrahn · 07-30-2014, 03:17 PM

Looking for quote for complete AC/heat system with this:
67 C20 - has 70 cab with smoothed firewall. Will use bulkhead fitting.
Cable controls using stock heater control in dash . I have acquired and cut in factory AC vent in center and ball vents. Want Alan Grove LSx low compressor mount for LQ9 in truck. Thanks.

Scottshotrods · 08-04-2014, 04:50 PM

Quote:

Originally Posted by joesgreen67

I sent you a PM...request for quote

Thank you!

p/m sent

Justin

Scottshotrods · 08-04-2014, 04:54 PM

Quote:

Originally Posted by rcrahn

Looking for quote for complete AC/heat system with this:
67 C20 - has 70 cab with smoothed firewall. Will use bulkhead fitting.
Cable controls using stock heater control in dash . I have acquired and cut in factory AC vent in center and ball vents. Want Alan Grove LSx low compressor mount for LQ9 in truck. Thanks.

p/m sent

Justin

Scottshotrods · 08-14-2014, 02:18 PM

ttt

texasplumr · 08-25-2014, 03:13 PM

1965 C20 I would like to price the Combo system and the Cool Only system.
Also need the mounting bracket for the driver side as my alternator is on the passenger side.
350 Crate Engine

My heater works but it's the pull knob one and doesn't work very well after aging and rusting for the past 50 years.

I also have a B&M shifter so there isn't much clearance between it and the dash.

Thanks

wthompson · 08-28-2014, 10:22 AM

Could you quote me on a 67 and a 68 (reason I'm doing both) non air cab?

Scottshotrods · 08-28-2014, 12:29 PM

Quote:

Originally Posted by wthompson

Could you quote me on a 67 and a 68 (reason I'm doing both) non air cab?

p/m sent

Justin

Scottshotrods · 08-28-2014, 12:32 PM

Quote:

Originally Posted by texasplumr

1965 C20 I would like to price the Combo system and the Cool Only system.
Also need the mounting bracket for the driver side as my alternator is on the passenger side.
350 Crate Engine

My heater works but it's the pull knob one and doesn't work very well after aging and rusting for the past 50 years.

I also have a B&M shifter so there isn't much clearance between it and the dash.

Thanks

p/m sent

Justin

69Rumbler · 08-28-2014, 09:11 PM

I need a whole kit for my 69 please

69Rumbler · 08-28-2014, 09:12 PM

Just AC I don't know if it makes a difference or not but no heat I live in Cali lol

Scottshotrods · 08-28-2014, 09:18 PM

Quote:

Originally Posted by 69Rumbler

Just AC I don't know if it makes a difference or not but no heat I live in Cali lol

P/m sent

Justin

BIGHANDZ · 11-15-2014, 02:48 PM

Hey Justin. Got 2 projects on the burner; 71 c-10 non a/c cab and a 71 el camino a/c car. Give me a price on both with shipping to 95330? Thx

mrdurden · 11-17-2014, 09:28 AM

Hey Justin. Can I get quotes for a '67 and a '68, both non-air cabs? Thanks.

Scottshotrods · 11-17-2014, 12:40 PM

Quote:

Originally Posted by BIGHANDZ

Hey Justin. Got 2 projects on the burner; 71 c-10 non a/c cab and a 71 el camino a/c car. Give me a price on both with shipping to 95330? Thx

P/m sent

Justin

Scottshotrods · 11-17-2014, 12:45 PM

Quote:

Originally Posted by mrdurden

Hey Justin. Can I get quotes for a '67 and a '68, both non-air cabs? Thanks.

P/m sent

Justin

Bean Counter · 01-11-2015, 09:34 AM

Justin - could you give me a quote on a 944170? I have a '72, factory A/C cab, 350-V8 with the stock A/C pulley system and am running an edelbrock manifold.

Thanks,
David

Scottshotrods · 01-12-2015, 11:53 AM

Quote:

Originally Posted by Bean Counter

Justin - could you give me a quote on a 944170? I have a '72, factory A/C cab, 350-V8 with the stock A/C pulley system and am running an edelbrock manifold.

Thanks,
David

p/m sent

Justin

07-16-2014, 12:34 AM	#752
boynton Registered User Join Date: Feb 2012 Location: Salado, Texas Posts: 1,418	Re: Vintage Air Sale Looking for info/pricing i have a '72 Chevrolet factory air cab with a 2009 ly6 truck 6.0 I have the ability to adapt line or make lines if this makes a difference. I have the motor mounted with the stock a/c compressor and would like to use it. Also have the factory a/c controller but will need new flex hose under the dash. __________________ Just trying to figure this out... 1970 SWB Step-Side http://67-72chevytrucks.com/vboard/s...d.php?t=552980 1970 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=584499 1970 SWB One Owner Step Side 6.0 LY6/6L90 http://67-72chevytrucks.com/vboard/s...d.php?t=617630 Junkyard's 1971 short wide http://67-72chevytrucks.com/vboard/s...86#post7531186

07-19-2014, 05:35 PM	#754
72 burban Registered User Join Date: Apr 2014 Location: Gas City Indiana Posts: 5	Re: Vintage Air Sale Price on unit for 72 suburban sb with factory air Thanks aron

07-21-2014, 08:35 AM	#755
Dakotachevy68 Registered User Join Date: Sep 2013 Location: Milwaukee wisconsin Posts: 13	Re: Vintage Air Sale I'm looking for pricing for a 1968 c20

07-30-2014, 11:51 AM	#758
joesgreen67 Registered User Join Date: May 2009 Location: Goldsboro NC Posts: 151	Re: Vintage Air Sale I sent you a PM...request for quote Thank you!

07-30-2014, 03:17 PM	#759
rcrahn Registered User Join Date: Jun 2007 Location: The West Posts: 767	Re: Vintage Air Sale Looking for quote for complete AC/heat system with this: 67 C20 - has 70 cab with smoothed firewall. Will use bulkhead fitting. Cable controls using stock heater control in dash . I have acquired and cut in factory AC vent in center and ball vents. Want Alan Grove LSx low compressor mount for LQ9 in truck. Thanks.

08-14-2014, 02:18 PM	#762
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Vintage Air Sale ttt

08-25-2014, 03:13 PM	#763
texasplumr Registered User Join Date: May 2014 Location: Austin Tx Posts: 28	Re: Vintage Air Sale 1965 C20 I would like to price the Combo system and the Cool Only system. Also need the mounting bracket for the driver side as my alternator is on the passenger side. 350 Crate Engine My heater works but it's the pull knob one and doesn't work very well after aging and rusting for the past 50 years. I also have a B&M shifter so there isn't much clearance between it and the dash. Thanks __________________ Russ Lane Austin, Texas

08-28-2014, 10:22 AM	#764
wthompson Registered User Join Date: Aug 2013 Location: Augusta Kansas Posts: 108	Re: Vintage Air Sale Could you quote me on a 67 and a 68 (reason I'm doing both) non air cab?

08-28-2014, 09:11 PM	#767
69Rumbler Registered User Join Date: Jan 2013 Location: Los Angeles Posts: 903	Re: Vintage Air Sale I need a whole kit for my 69 please __________________ 1969 C20 CUSTOM "RUMBLEr"

08-28-2014, 09:12 PM	#768
69Rumbler Registered User Join Date: Jan 2013 Location: Los Angeles Posts: 903	Re: Vintage Air Sale Just AC I don't know if it makes a difference or not but no heat I live in Cali lol __________________ 1969 C20 CUSTOM "RUMBLEr"

11-15-2014, 02:48 PM	#770
BIGHANDZ Registered User Join Date: Jan 2011 Location: STOCKTON CA Posts: 8	Re: Vintage Air Sale Hey Justin. Got 2 projects on the burner; 71 c-10 non a/c cab and a 71 el camino a/c car. Give me a price on both with shipping to 95330? Thx

11-17-2014, 09:28 AM	#771
mrdurden Registered User Join Date: Sep 2004 Location: Rio Rancho, NM Posts: 92	Re: Vintage Air Sale Hey Justin. Can I get quotes for a '67 and a '68, both non-air cabs? Thanks. __________________ '67 2wd LWB Fleetside '71 4wd LWB Fleetside

01-11-2015, 09:34 AM	#774
Bean Counter Registered User Join Date: Jul 2013 Location: Conyers, GA Posts: 29	Re: Vintage Air Sale Justin - could you give me a quote on a 944170? I have a '72, factory A/C cab, 350-V8 with the stock A/C pulley system and am running an edelbrock manifold. Thanks, David __________________ David Next project - 1953 Chevy 150 2 Dr Sedan. https://www.chevytalk.org/fusionbb/s...hp?tid/355913/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.