LS1 into a 73 cheyenne - Page 31 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mud.man.rj · 02-28-2012, 07:16 PM

I can build engines do anything pretty much mechanical, fab and weld most anything but bodywork, wish I could do the magic like your project, smooth.

smokedat · 03-01-2012, 10:07 PM

i found these random boxes containing the brake assembly parts. Gas and brake pedal. I made the brake pedal to match my gas 1. I also drilled the brake pedal arm to match the gas 1.

franky69c10 · 03-01-2012, 11:04 PM

Looks real good bro
Posted via Mobile Device

68 TT · 03-02-2012, 11:25 PM

Nice work. The pedal looks great.

mcbassin · 03-03-2012, 12:14 AM

Those look like some real nice custom parts.

smokedat · 03-03-2012, 10:40 PM

I got the trans mount and poly plus, from cpp. this part does not fit properly. I had to slot the slots and ream the frame holes, and grind the ends by like a 1/16 on each end, in order to install this.

smokedat · 03-03-2012, 10:45 PM

i strated installing the mirrors but after a few drinks i lost a screw, spent about 1hr looking for it, will have to make a trip to hardware store. so i canceled the operation, only did 1 side

smokedat · 03-03-2012, 11:29 PM

My colection of sexy ladies. Sata Master Technician kit

smokedat · 03-10-2012, 10:40 PM

I got my HOK KD 3005 blue this stuff was hard to come by i ordered 3 from one supplier and 3 from another.

smokedat · 03-10-2012, 10:46 PM

And i got 2 gallons of Glasurit 923-200.

mcbassin · 03-11-2012, 12:56 AM

That is some serious equipment you have there Alex! That looks like some high dollar paint material you're using too. Looking forward to seeing it on your truck.

smokedat · 03-11-2012, 02:21 AM

Gracias, if you have any questions I will be glad to help.

Quote:

Originally Posted by mud.man.rj

I can build engines do anything pretty much mechanical, fab and weld most anything but bodywork, wish I could do the magic like your project, smooth.

Posted via Mobile Device

smokedat · 03-11-2012, 02:35 AM

Well I admit to beaing a chronic tool hoarder. I see blue in the near future, after 3-4 yrs in the making it's finally becoming a reality. I am trying to put together a quality product as this will represent my name and demonstrate my crafting abilitys. Everything is done in house nothing is subbed out, other than the upholstery, I don't do stitching .

Quote:

Originally Posted by mcbassin

That is some serious equipment you have there Alex! That looks like some high dollar paint material you're using too. Looking forward to seeing it on your truck.

Posted via Mobile Device

smokedat · 03-15-2012, 10:55 PM

broke loose the front end. here are some hot off the oven pies

mcbassin · 03-15-2012, 11:45 PM

Blue looks great Alex! That is a sweet color.

68 TT · 03-16-2012, 01:00 AM

Very nice Alex. Great work. Can't wait to see the rest in color.

Pop's C-10 · 03-16-2012, 01:01 AM

Those are some sweet mirrors

Gordonr1973 · 03-17-2012, 07:53 AM

Quote:

Originally Posted by smokedat

i found these random boxes containing the brake assembly parts. Gas and brake pedal. I made the brake pedal to match my gas 1. I also drilled the brake pedal arm to match the gas 1.

Very nice work! Love that blue color!!

raull · 03-17-2012, 03:18 PM

subscribed !!! nice build you got going , love that vette too man !!!!!

smokedat · 03-22-2012, 11:56 PM

i started final assembly on the front, being extra cautious not to scratch anything, all bolts have lock tite applied and torqued accordingly. i still need to install the rack and the spindles.

VA72C10 · 03-22-2012, 11:59 PM

That looks awesome!!! The bright against the blue....nice!!!

smokedat · 03-23-2012, 12:04 AM

Reinforcement to the cut out i did for the steering shaft. i used some flat bar following the cut out, i welded it all the way around back and front and sanded the top smooth, after the paint it really looks good

smokedat · 03-23-2012, 12:08 AM

as for the k member itself i did not want to weld it. I prefer having the removable option, this might be needed later in future for what ever reason,

smokedat · 03-23-2012, 12:34 AM

Quote:

Originally Posted by mcbassin

Blue looks great Alex! That is a sweet color.

Quote:

Originally Posted by 68 TT

Very nice Alex. Great work. Can't wait to see the rest in color.

Quote:

Originally Posted by Pop's C-10

Those are some sweet mirrors

Quote:

Originally Posted by Gordonr1973

Very nice work! Love that blue color!!

Quote:

Originally Posted by raull

subscribed !!! nice build you got going , love that vette too man !!!!!

Quote:

Originally Posted by VA72C10

That looks awesome!!! The bright against the blue....nice!!!

Quote:

Originally Posted by franky69c10

Looks real good bro
Posted via Mobile Device

Quote:

Originally Posted by 68 TT

Nice work. The pedal looks great.

gracias for the compliments im just glad theres someone out there that appreciates this, kinda makes me feel a bit normal as many of my closest peeps call me crazy, but it doesnt bother me, you either get it or you dont, this hobby is not for everyone.

smokedat · 03-23-2012, 12:37 AM

I second that, this blue is ****in sweet it likes to show itself in different tones depending on the light and angle

Quote:

Originally Posted by VA72C10

That looks awesome!!! The bright against the blue....nice!!!

02-28-2012, 07:16 PM	#751
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: LS1 into a 73 cheyenne I can build engines do anything pretty much mechanical, fab and weld most anything but bodywork, wish I could do the magic like your project, smooth.

03-01-2012, 10:07 PM	#752
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne i found these random boxes containing the brake assembly parts. Gas and brake pedal. I made the brake pedal to match my gas 1. I also drilled the brake pedal arm to match the gas 1. Attached Images __________________ Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios

03-01-2012, 11:04 PM	#753
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: LS1 into a 73 cheyenne Looks real good bro Posted via Mobile Device __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

03-02-2012, 11:25 PM	#754
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: LS1 into a 73 cheyenne Nice work. The pedal looks great. __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

03-03-2012, 12:14 AM	#755
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: LS1 into a 73 cheyenne Those look like some real nice custom parts. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

03-03-2012, 10:40 PM	#756
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne I got the trans mount and poly plus, from cpp. this part does not fit properly. I had to slot the slots and ream the frame holes, and grind the ends by like a 1/16 on each end, in order to install this. Attached Images __________________ Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios

03-03-2012, 10:45 PM	#757
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne i strated installing the mirrors but after a few drinks i lost a screw, spent about 1hr looking for it, will have to make a trip to hardware store. so i canceled the operation, only did 1 side Attached Images __________________ Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios

03-03-2012, 11:29 PM	#758
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne My colection of sexy ladies. Sata Master Technician kit Attached Images __________________ Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios

03-10-2012, 10:40 PM	#759
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne I got my HOK KD 3005 blue this stuff was hard to come by i ordered 3 from one supplier and 3 from another. Attached Images __________________ Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios

03-10-2012, 10:46 PM	#760
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne And i got 2 gallons of Glasurit 923-200. Attached Images __________________ Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios

03-11-2012, 12:56 AM	#761
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: LS1 into a 73 cheyenne That is some serious equipment you have there Alex! That looks like some high dollar paint material you're using too. Looking forward to seeing it on your truck. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

03-15-2012, 10:55 PM	#764
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne broke loose the front end. here are some hot off the oven pies Attached Images __________________ Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios

03-15-2012, 11:45 PM	#765
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: LS1 into a 73 cheyenne Blue looks great Alex! That is a sweet color. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

03-16-2012, 01:00 AM	#766
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: LS1 into a 73 cheyenne Very nice Alex. Great work. Can't wait to see the rest in color. __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

03-16-2012, 01:01 AM	#767
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: LS1 into a 73 cheyenne Those are some sweet mirrors __________________ 1981 C-10 (Pop's) 1978 Camaro 2006 Lacrosse



Register or Log In To remove these advertisements.

03-17-2012, 03:18 PM	#769
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: LS1 into a 73 cheyenne subscribed !!! nice build you got going , love that vette too man !!!!! __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

03-22-2012, 11:56 PM	#770
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne i started final assembly on the front, being extra cautious not to scratch anything, all bolts have lock tite applied and torqued accordingly. i still need to install the rack and the spindles. Attached Images __________________ Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios

03-22-2012, 11:59 PM	#771
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: LS1 into a 73 cheyenne That looks awesome!!! The bright against the blue....nice!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-23-2012, 12:04 AM	#772
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne Reinforcement to the cut out i did for the steering shaft. i used some flat bar following the cut out, i welded it all the way around back and front and sanded the top smooth, after the paint it really looks good Attached Images __________________ Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios

03-23-2012, 12:08 AM	#773
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne as for the k member itself i did not want to weld it. I prefer having the removable option, this might be needed later in future for what ever reason, __________________ Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios

Register or Log In To remove these advertisements.