LS swappers, post up your pics!!

[jrusher]

Just added boost to my 65 and my wife’s 61 stocker

[Irish1941]

Originally Posted by gringoloco

I like your style! Who makes the wheels?

Mike from Circle Racing did them up. Last set before he moved the shop east.
Another great guy to deal with.

[Duck1]

Originally Posted by Bigru

Hey guys, I need some help.. this is my first swap and I have no idea what I’m getting into. I have a 6.0/4l80 from a Denali, I replaced the intake from a TBSS. I’ve ordered a adapter plate to use the throttle body from the 6.0 intake. What does these connect to?

2500 Denali? Because 1500 has 4L65E

[beaterku]

Here is my 72 with a 6.0/4L80e I finished up last year.

[jrusher]

Originally Posted by beaterku

Here is my 72 with a 6.0/4L80e I finished up last year.

Beauty !

[youngrodder]

The LS1 in my 53 Suburban..

[Cmillwheels]

Still a work in progress but I’m getting closer....

[Fitz57]

Finally after many years I got my 57 on 05 Silverado 4x4 frame with 5.3 L33 going down the road.

[Jason 56]

Here’s a L83 5.3L/ 8L90 in progress. Going in my 56!

[332rick]

Here are few of my setup and a before and after photo.

[BAM55]

Here's mine. Its a 5.3 bored to a 5.7, 243 Heads, and a TSP 228 Cam.

[tinydb84]

@BAM55 I love how clean that is.

[BAM55]

Originally Posted by tinydb84

@BAM55 I love how clean that is.

Thank you

[MT65]

My 65 with LS1/t-56 from 04 GTO....

[Justin71105]

L33 engine with a non usable 4l60e in it.


It is running (great), just need transmission rebuilt and it can move under its own power. Then just a few other small things and I can be driving it on the road, been a long 18 momths from where I started.

[oldman3]

My 50 roadster pickup, 5.3 LM7 4L60E trans...Jim

[gpgofast]

1971 k20....

[Blazerowner]

Ls3 - 4L80e with np205.

[TotallyHucked]

2006 LH6 out of an Envoy Denali. I bought the motor before I knew much about these, turns out they're a b*st*rd child lol. I just knew it was aluminum and that's what I wanted for my handling goals later on

- Gen4 aluminum block with knock sensors on the sides
- Gen4 rods
- 24X Gen3 timing system
- Uses an E40 computer (only these, 04/05 GTOs and SSRs used that comp)
- 799 heads (same as 243s)
- TBSS style intake
- 30lb injectors

Originally (3yrs ago) it was thrown in with the 4L65E that came with it and a BTR Stage 4 V2 truck cam (.553/.553 224/230 109lsa) and LS6 springs.






Then last fall I pulled it out for a reseal (rear main) and to swap to a T56. So since I didn't have to worry about converter walk anymore, I stepped up to the TSP Bald Eagle N/A cam (.600/.600 227/234 111lsa), double valve springs, a CHE trunnion kit and 50lb/hr injectors.

[A1971Blazer]

'67 C10 SWB step side resto-mod
2002 TransAm LS1 with built 4L60E
Close to being completed!

[hewittca]

It's cool to see this thread resurface. I have one to contribute. I LS swapped this 72 GMC within the last year and have been driving it for a few months now. It's a 2004 LM7 with a 2002 NV3500 transmission. I did not rebuild the bottom end or heads but I did update, replace, and clean pretty much all the auxiliary items. I used many "LS swap" parts as well as some custom made bits and pieces to make everything work. I have extensive details on everything in my build thread.

[TotallyHucked]

Originally Posted by hewittca

Man that looks good! Makes me wish I'd painted the whole motor orange instead of just the block. Pretty sure I saw you roll into Fall Revival, that thing looks great!

[mxerhale]

Hewittca, that is a very nice driver there and I love those hubcaps!