** YOUNG FRANKENSTEIN ** The truck Chevrolet should have built. - Page 31 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drewskiren · 03-04-2011, 08:39 PM

Its magic I tell ya.

Yes it hangs down about 2.75 inches, but I have been planning a dash lower valance panel to house my modern key switch, heated seat controls, cruise control, and a few other things. I will just run it all the way across to the passenger side and that way I can put the Pass. heat switch over there for the pass. I have been planning some sort of video screen, so now that the the ac unit is blocking some of the depth for a radio and ashtray, I am thinking of mounting a flatscreen there. Gotta be able to watch movies on the road trips !

Project · 03-04-2011, 08:42 PM

I sign on here and the first thing I do is check you thread for progress. Again as others have said awesome work and you have some great talent.

drewskiren · 03-04-2011, 08:51 PM

Quote:

Originally Posted by VA72C10

Nice job shoehorning that in

It doesn't stick down that much lower than a stock A/C box actually...probably 3-4" or so more....
...are you going to be able to integrate the controls somehow?

I will be using the plug and play controls from the new truck located in the factory spot.

Quote:

Originally Posted by Pop's C-10

Nice...who needs a glove box anyway....lol

You running beanch or buckets...

Glovebox will be quite shallow, but all I usually have in there is napkins for kid cleanup.
I am running the full black leather setup from the 2002 donor truck - buckets with a flip up middle seat.

Quote:

Originally Posted by JasonBird

that is some nice photoshoppin'!!

It's the real deal.
I'll need to massage it a little more, but it is in there with no dash mods. I trimmed a little off of the new ac unit, and I still have a lot to do on the fire wall. I have more work on the other side of the firewall with the wiring harness rubber grommet, and finish up the cowl rain divert-er area. After that I might be ready to edge in the fire wall and interior. The interior valance will be covered in upholstery, so no need to make or paint that now.

drewskiren · 03-04-2011, 08:53 PM

Quote:

Originally Posted by Project

I sign on here and the first thing I do is check you thread for progress. Again as others have said awesome work and you have some great talent.

You know I'm gonna have progress! Thanks

mcbassin · 03-04-2011, 10:22 PM

Nice work on the a/c heater unit. I really like the idea of using modern system. I also like that you can save some big bucks on your build. I must be nice to have access to all those late model rigs......keep the pics coming.

**67cheby** · 03-04-2011, 11:13 PM

your set up for the fresh air intake looks great, nice work

VA72C10 · 03-04-2011, 11:50 PM

Quote:

Originally Posted by 67cheby

your set up for the fresh air intake looks great, nice work

I agree....and you get the benefit of a cabin filter!

drewskiren · 03-05-2011, 12:03 AM

Quote:

Originally Posted by VA72C10

I agree....and you get the benefit of a cabin filter!

I'll be needing a new one of those !!! It was filthy.

Hubscrub · 03-05-2011, 12:53 AM

wow what a project, your a brave man. Will look foward to seeing it complete!

mjensen · 03-05-2011, 12:01 PM

I am just blown away that you were able to fit that in there! It looks awesome...great job!

drewskiren · 03-05-2011, 01:42 PM

Here is a pic I found here on the site of what the lower dash valance might look like. Not doing a console in the middle, but I think the extra 3 inches on the bottom of the dash looks nice.

denny5625 · 03-05-2011, 01:45 PM

Quote:

Originally Posted by drewskiren

Here is a pic I found here on the site of what the lower dash valance might look like. Not doing a console in the middle, but I think the extra 3 inches on the bottom of the dash looks nice.

That will look really nice.

Newtz67 · 03-05-2011, 02:16 PM

Awesome! All of it! Can't wait to see the dash complete!

468BIGBLOCK · 03-05-2011, 08:34 PM

I cant wait to see the dash and interior!!

drewskiren · 03-05-2011, 08:59 PM

Quote:

Originally Posted by denny5625

That will look really nice.

Quote:

Originally Posted by Newtz67

Awesome! All of it! Can't wait to see the dash complete!

Quote:

Originally Posted by 468BIGBLOCK

I cant wait to see the dash and interior!!

Whoa there fellas, let me get the monster up on two feet first.

Newtz67 · 03-05-2011, 09:12 PM

Quote:

Originally Posted by drewskiren

Whoa there fellas, let me get the monster up on two feet first.

ok.............

drewskiren · 03-06-2011, 02:02 AM

Picture time.

I built a bed for a friend and I pulled the last 6.0 Denali engine today, so not much done on the crew cab.

Built a filler panel/rain gutter for the firewall.

drewskiren · 03-06-2011, 02:03 AM

I also got the gas tank installed for the final time.

denny5625 · 03-06-2011, 02:29 AM

Its kinda start'n to look like you know what you're do'n here. I'm in awe. The monster is about to breathe!

67chevy1series · 03-06-2011, 02:37 AM

looks good drew that fire wall peice you mmade covers nicely it does go farther to the end then it would have if the factory would hav done it right?

drewskiren · 03-06-2011, 11:13 AM

Quote:

Originally Posted by 67chevy1series

looks good drew that fire wall peice you mmade covers nicely it does go farther to the end then it would have if the factory would hav done it right?

Yes, it is wider. The rain gutter follows the curve of the blower motor hole.

VA72C10 · 03-06-2011, 11:29 AM

We'll let you slide on the limited progress just this once since you did build a bed and remove an engine also....

....but only this once....

*87 chevy silverado* · 03-06-2011, 12:23 PM

im late to the party but nice build

hgs_notes · 03-06-2011, 01:22 PM

Unreal. Magic is right.

drewskiren · 03-06-2011, 05:06 PM

Got the water divert-er glued in and celebrated my 18th anniversary.

03-04-2011, 08:39 PM	#751
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Its magic I tell ya. Yes it hangs down about 2.75 inches, but I have been planning a dash lower valance panel to house my modern key switch, heated seat controls, cruise control, and a few other things. I will just run it all the way across to the passenger side and that way I can put the Pass. heat switch over there for the pass. I have been planning some sort of video screen, so now that the the ac unit is blocking some of the depth for a radio and ashtray, I am thinking of mounting a flatscreen there. Gotta be able to watch movies on the road trips ! __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

03-04-2011, 08:42 PM	#752
Project Registered User Join Date: Feb 2011 Location: Flower Mound, Tx Posts: 54	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I sign on here and the first thing I do is check you thread for progress. Again as others have said awesome work and you have some great talent.

03-04-2011, 10:22 PM	#755
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Nice work on the a/c heater unit. I really like the idea of using modern system. I also like that you can save some big bucks on your build. I must be nice to have access to all those late model rigs......keep the pics coming. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

03-04-2011, 11:13 PM	#756
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. your set up for the fresh air intake looks great, nice work __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-05-2011, 12:53 AM	#759
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. wow what a project, your a brave man. Will look foward to seeing it complete! __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

03-05-2011, 12:01 PM	#760
mjensen Registered User Join Date: Jun 2006 Location: Utah Posts: 1,562	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I am just blown away that you were able to fit that in there! It looks awesome...great job! __________________ Mike '69 GMC 3/4 ton 4x4 Build Thread

03-05-2011, 01:42 PM	#761
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Here is a pic I found here on the site of what the lower dash valance might look like. Not doing a console in the middle, but I think the extra 3 inches on the bottom of the dash looks nice. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife! Last edited by drewskiren; 03-05-2011 at 01:43 PM.

03-05-2011, 02:16 PM	#763
Newtz67 Registered User Join Date: Mar 2010 Location: A t w a t e r, Ca Posts: 1,201	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Awesome! All of it! Can't wait to see the dash complete! __________________ My '67 short wide Our '68 Burb My '04 Z71 The '54 Belair The '69 Cadillac

03-05-2011, 08:34 PM	#764
468BIGBLOCK MEMBER OF THE JUNK MAN CLUB Join Date: Jul 2001 Location: paragould arkansas 72450 Posts: 425	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I cant wait to see the dash and interior!! __________________ I LIKE 67-72 CHEVYS, I HAVE OWNED OVER 150 OF THEM IN THE LAST 25 YEARS..

03-06-2011, 02:02 AM	#767
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Picture time. I built a bed for a friend and I pulled the last 6.0 Denali engine today, so not much done on the crew cab. Built a filler panel/rain gutter for the firewall. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife! Last edited by drewskiren; 03-06-2011 at 02:06 AM.

03-06-2011, 02:03 AM	#768
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I also got the gas tank installed for the final time. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

03-06-2011, 02:29 AM	#769
denny5625 Registered User Join Date: Jul 2007 Location: Kennewick, WA Posts: 152	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Its kinda start'n to look like you know what you're do'n here. I'm in awe. The monster is about to breathe! __________________ 66 el Camino 70 1/2 RS Z-28 71 C10 2wd 72 2 wd Blazer (2) 72 4 x 4 Blazers 88 24' Mirage 70 mph+ 08 Harley Night Train 08 Silverado 4d 4 x 4

03-06-2011, 02:37 AM	#770
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. looks good drew that fire wall peice you mmade covers nicely it does go farther to the end then it would have if the factory would hav done it right?

03-06-2011, 11:29 AM	#772
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. We'll let you slide on the limited progress just this once since you did build a bed and remove an engine also.... ....but only this once.... __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 03-06-2011 at 11:29 AM.

03-06-2011, 12:23 PM	#773
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. im late to the party but nice build



Register or Log In To remove these advertisements.

03-06-2011, 01:22 PM	#774
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Unreal. Magic is right. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

03-06-2011, 05:06 PM	#775
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Got the water divert-er glued in and celebrated my 18th anniversary. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife! Last edited by drewskiren; 03-06-2011 at 11:59 PM.

Register or Log In To remove these advertisements.