Die-cast 67-72 - Page 31 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy_mike · 07-24-2008, 11:47 AM

Quote:

Originally Posted by FRENCHBLUE72

the 2nd one was a loc rider truck...67-68

Where can I get one of these????

hgs_notes · 07-24-2008, 05:43 PM

Quote:

Originally Posted by chevy_mike

Where can I get one of these????

I think I have some around I'd sell.

chevy_mike · 07-25-2008, 12:32 AM

Quote:

Originally Posted by hgs_notes

I think I have some around I'd sell.

Thanks, I PM'ed ya.

Jayman931 · 07-25-2008, 04:52 PM

Frenchblue: Most cameras have a minimum focusing distance. Either that or your camera's focus mode is not on center focus mode. Just thought i would chime it...

**FRENCHBLUE72** · 07-25-2008, 05:44 PM

hey thanks/.. Ill check it out

**Palf70Step** · 07-25-2008, 05:48 PM

Got my latest shipment of toys today.

The 2 John Deer Blazers (one came with the tractor). Sorry for the other one, but I liked it. The JD old F100 looked like my very first truck, so I had to have it too.

**FRENCHBLUE72** · 07-26-2008, 09:33 AM

Hey bill where did you get the one with the green top?

**Palf70Step** · 07-26-2008, 10:44 AM

It came as part of a set with the tractor.

Got it from here
http://www.outbacktoystore.com/Detai...?Product=16233

90\87Formula · 07-27-2008, 10:05 PM

They wanted $12.++ to ship two of those to me.

Maybe they'll show up at the Tractor Supply store.

Quote:

Originally Posted by Palf70Step

It came as part of a set with the tractor.

Got it from here
http://www.outbacktoystore.com/Detai...?Product=16233

big_al_71 · 07-29-2008, 07:42 AM

I wanted to share some of mine!!!

Andy4639 · 07-29-2008, 07:40 PM

Looking at entering the truck at Year Ones show in September and ran across this. Thought you guy's would like it.

http://www.yearone.com/serverfiles/f...&searchid=1536

Hook'em · 07-31-2008, 03:13 PM

Quote:

Originally Posted by 9087Formula

They wanted $12.++ to ship two of those to me.

Maybe they'll show up at the Tractor Supply store.

Robert-

Send me a PM. I tried to send you one, but could not figure it out. Maybe your inbox is full or something.

90\87Formula · 08-06-2008, 07:09 PM

Hey Doug. Here's what I was talking about in the PM.

Quote:

Originally Posted by Hook'em

Robert-

Send me a PM. I tried to send you one, but could not figure it out. Maybe your inbox is full or something.

hgs_notes · 07-29-2008, 10:13 PM

Try this link:

http://www.yearone.com/serverfiles/f...ain2.asp?cat=Y

Andy4639 · 07-29-2008, 10:15 PM

I got the truck entered. Just posted this because it's our models trucks. They have differant Logo's on them also. Thanks though.

**special-K** · 07-29-2008, 10:33 PM

Hey Andy/Mr.Diecast Sticky Creator,Where have you been?Good to hear (read) from you.Thanks for putting us onto those pressed steel trucks.I got the first four made with the truck plants on the door.I`ve been wanting another.

Andy4639 · 07-29-2008, 10:58 PM

special-K,
It's summer time down here in the south. I don't spend much time inside. I've been at the beach house a lot. I started a new position here at work so I may have more time to type. Ha!!!!!
Been working on golfcarts all summer. Fix to start the air bags on the truck maybe next week.

**special-K** · 07-30-2008, 06:27 AM

Glad to hear you`re enjoying the summer and too busy for the computer.Nothing wrong with that.I`m on a little less...really!It would be alot less if I was at the beach.

Andy4639 · 07-30-2008, 02:52 PM

I started shift work at the plant and I love it so far. I start my 7 day break Friday morning so back to the beach. The most days nights I work is 4 in a row so it great.

**special-K** · 07-30-2008, 06:49 PM

That sound great.Your job can fit your lifestyle better.

Man...I just missed this one.It only had one bid at the starting price of $9.99.I bid on it the morning of the day the auction ended while I was at work.I bid $45.00 max. since shipping was $5.00.When I got home I checked and the same bidder added a buck to my bid and won.At least I made sure he didn`t get it for a measley 10 bucks

:

hgs_notes · 07-31-2008, 01:01 AM

Quote:

Originally Posted by special-K

That sound great.Your job can fit your lifestyle better.

Man...I just missed this one.It only had one bid at the starting price of $9.99.I bid on it the morning of the day the auction ended while I was at work.I bid $45.00 max. since shipping was $5.00.When I got home I checked and the same bidder added a buck to my bid and won.At least I made sure he didn`t get it for a measley 10 bucks

:

I got one of these from my brother-in-law. It's a custom fleetside and also came in a version with a glider and ramp, I think it was called a sky liner or something, and is very expensive on ebay. They also released a 35th anniversary of it I think. Mine needs to be refurbished, but it was free.

**FRENCHBLUE72** · 07-30-2008, 08:15 PM

Thanks tim thats gonna look good on my shelf^^^^^^^^^^^^ still cant believe I paid that much for a hot wheels,but I just could not let you have it...................

just kidding.... was not me..

Andy4639 · 07-30-2008, 08:37 PM

Haven't been buying anything lately. I have a couple of those things though.
You can see them on the right side of the picture.
Haven't even been looking. My daughter's car got stolen right after she moved to the beach house so we have been fighting police and insurance company on that and trying to find her a new car. Got her one a couple of weeks ago. Just like the one she had with a few more miles on it but it's in better shape.Insurance doesn't want to give us anything for her's so we haven't signed the paper work yet.
Have to get some updated pictures also done of the collection.

Andy4639 · 07-30-2008, 11:00 PM

Don't look you may buy it!

http://cgi.ebay.com/AMT-1-25-SCALE-C...QQcmdZViewItem

Andy4639 · 07-31-2008, 02:33 PM

Here is a better picture of my two fleetsides. I have modified both of them. The red is to look more like my truck. The green one was just cleaned up real good. The red one was missing the bed cover when I bought it so it was given a more custom cover with surf boards.

07-25-2008, 04:52 PM	#4
Jayman931 Registered User Join Date: Oct 2006 Location: Hattiesburg, MS Posts: 137	Re: Die-cast 67-72 Frenchblue: Most cameras have a minimum focusing distance. Either that or your camera's focus mode is not on center focus mode. Just thought i would chime it... __________________ The stupidty of your actions is directly proportionate to the number of people watching you...

07-25-2008, 05:44 PM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,592	Re: Die-cast 67-72 hey thanks/.. Ill check it out __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-25-2008, 05:48 PM	#6
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,761	Re: Die-cast 67-72 Got my latest shipment of toys today. The 2 John Deer Blazers (one came with the tractor). Sorry for the other one, but I liked it. The JD old F100 looked like my very first truck, so I had to have it too. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

07-26-2008, 09:33 AM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,592	Re: Die-cast 67-72 Hey bill where did you get the one with the green top? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-26-2008, 10:44 AM	#8
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,761	Re: Die-cast 67-72 It came as part of a set with the tractor. Got it from here http://www.outbacktoystore.com/Detai...?Product=16233 Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

07-29-2008, 07:42 AM	#10
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Die-cast 67-72 I wanted to share some of mine!!! Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

07-29-2008, 07:40 PM	#11
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Die-cast 67-72 Looking at entering the truck at Year Ones show in September and ran across this. Thought you guy's would like it. http://www.yearone.com/serverfiles/f...&searchid=1536 __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

07-29-2008, 10:13 PM	#14
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,122	Re: Die-cast 67-72 Try this link: http://www.yearone.com/serverfiles/f...ain2.asp?cat=Y __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

07-29-2008, 10:15 PM	#15
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Die-cast 67-72 I got the truck entered. Just posted this because it's our models trucks. They have differant Logo's on them also. Thanks though. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

07-29-2008, 10:33 PM	#16
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Die-cast 67-72 Hey Andy/Mr.Diecast Sticky Creator,Where have you been?Good to hear (read) from you.Thanks for putting us onto those pressed steel trucks.I got the first four made with the truck plants on the door.I`ve been wanting another. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-29-2008, 10:58 PM	#17
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Die-cast 67-72 special-K, It's summer time down here in the south. I don't spend much time inside. I've been at the beach house a lot. I started a new position here at work so I may have more time to type. Ha!!!!! Been working on golfcarts all summer. Fix to start the air bags on the truck maybe next week. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

07-30-2008, 06:27 AM	#18
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Die-cast 67-72 Glad to hear you`re enjoying the summer and too busy for the computer.Nothing wrong with that.I`m on a little less...really!It would be alot less if I was at the beach. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-30-2008, 02:52 PM	#19
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Die-cast 67-72 I started shift work at the plant and I love it so far. I start my 7 day break Friday morning so back to the beach. The most days nights I work is 4 in a row so it great. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

07-30-2008, 06:49 PM	#20
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Die-cast 67-72 That sound great.Your job can fit your lifestyle better. Man...I just missed this one.It only had one bid at the starting price of $9.99.I bid on it the morning of the day the auction ended while I was at work.I bid $45.00 max. since shipping was $5.00.When I got home I checked and the same bidder added a buck to my bid and won.At least I made sure he didn`t get it for a measley 10 bucks : __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 07-30-2008 at 06:57 PM.

07-30-2008, 08:15 PM	#22
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,592	Re: Die-cast 67-72 Thanks tim thats gonna look good on my shelf^^^^^^^^^^^^ still cant believe I paid that much for a hot wheels,but I just could not let you have it................... just kidding.... was not me.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

07-30-2008, 08:37 PM	#23
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Die-cast 67-72 Haven't been buying anything lately. I have a couple of those things though. You can see them on the right side of the picture. Haven't even been looking. My daughter's car got stolen right after she moved to the beach house so we have been fighting police and insurance company on that and trying to find her a new car. Got her one a couple of weeks ago. Just like the one she had with a few more miles on it but it's in better shape.Insurance doesn't want to give us anything for her's so we haven't signed the paper work yet. Have to get some updated pictures also done of the collection. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

07-30-2008, 11:00 PM	#24
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Die-cast 67-72 Don't look you may buy it! http://cgi.ebay.com/AMT-1-25-SCALE-C...QQcmdZViewItem __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

07-31-2008, 02:33 PM	#25
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Die-cast 67-72 Here is a better picture of my two fleetsides. I have modified both of them. The red is to look more like my truck. The green one was just cleaned up real good. The red one was missing the bed cover when I bought it so it was given a more custom cover with surf boards. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

Register or Log In To remove these advertisements.