OR 100's of misc parts from the last 6 trucks parted out - Page 31 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

suville · 11-02-2014, 10:03 PM

Got a pair of 6 cyl engine stands? Zip 83647 Thanks for your time

69SCSS · 11-04-2014, 07:51 PM

You have any of those ashtrays left? I need a dark green one, looks like the bottom one in your first pic. If so, shipping to 98661?
Thanks, Al

**pimpston65** · 11-04-2014, 09:40 PM

is the 67-68 teal armrest still for sale? if so i'll take it

68Bowtie4x4 · 11-05-2014, 12:13 AM

Do you have any chrome heater control panels non-A/C that all the levers are good on?

Please let me know ASAP.

Thanks.

**TBONE1964** · 11-10-2014, 02:14 AM

Hello all,

I was asked by Tom (tll74) to let everyone know that he will be available to respond to request after the 18th. He is away on a hunting trip currently.

Thank you,
Tom

engairuph · 11-10-2014, 08:11 AM

When you talk to him see when he will send my parts? Already paid and need them like last week.
Thanks

**TBONE1964** · 11-10-2014, 04:18 PM

Quote:

Originally Posted by engairuph

When you talk to him see when he will send my parts? Already paid and need them like last week.
Thanks

PM sent on behalf of tll74 (Tom)

**tll74** · 11-20-2014, 02:50 AM

back from my annual elk hunting trip and now catching up.

Quote:

Originally Posted by Senorx

Looking for a Quadrajet carb stud and Wingnut like this or close to it. For a 71 SBC 350 with original 4 barrel Quadrajet.

8.00 shipped

Quote:

Originally Posted by suville

Got a pair of 6 cyl engine stands? Zip 83647 Thanks for your time

250 or 292?

Quote:

Originally Posted by 69SCSS

You have any of those ashtrays left? I need a dark green one, looks like the bottom one in your first pic. If so, shipping to 98661?
Thanks, Al

6.00 shipping

Quote:

Originally Posted by pimpston65

is the 67-68 teal armrest still for sale? if so i'll take it

I think so. 7.50 shipping

Quote:

Originally Posted by 68Bowtie4x4

Do you have any chrome heater control panels non-A/C that all the levers are good on?

Please let me know ASAP.

Thanks.

45.00 and 10.00 shipping

Thanks, Tom

engairuph · 11-10-2014, 07:32 PM

Thanks, and tell him good hunting. Ralph

**pimpston65** · 12-03-2014, 06:57 AM

ok cool, if its 67 style i'll take the arm rest...

markmdz · 11-26-2014, 04:06 PM

In need of a few parts for my '68 C20:

Gas Pedal
Dash pad (preferably black)
Gauge Cluster
Taillight Harness
Headlight Harness
Chrome headlight bezel
Hood "CHEVROLET" letters (are these stick on, or is there a post that goes into the hood)

I'm sure the list will grow as I go through this truck. It's a new addition to me, so I have yet to really dig into it.

Chevy Schadow · 11-26-2014, 04:19 PM

I need a Blazer fuel tube cover and a blue seat belt (female side).

Blazerback72 · 11-26-2014, 04:58 PM

I need outside right door handle
2 inside door handles
2 window crank handles
Please let me know if u still have thanks !

67chevy4x4c · 11-26-2014, 06:31 PM

Do you have ebrake cable from brake pedal to the brake shoes ? And how much shipped to Bartley w va 24813

TexasLS1 · 11-26-2014, 07:51 PM

Any chance you have a factory Flywheel/Torque Converter Dust Cover for a TH350 Transmission?

**tll74** · 11-29-2014, 12:44 PM

Quote:

Originally Posted by markmdz

In need of a few parts for my '68 C20:

Gas Pedal
Dash pad (preferably black)
Gauge Cluster
Taillight Harness
Headlight Harness
Chrome headlight bezel
Hood "CHEVROLET" letters (are these stick on, or is there a post that goes into the hood)

I'm sure the list will grow as I go through this truck. It's a new addition to me, so I have yet to really dig into it.

Gas Pedal 10.00 std 15.00 deluxe
Dash pad (preferably black) no pads right now
Gauge Cluster "take out" cluster with gauges 50.00
Taillight Harness from cab to bumper 15.00
Headlight Harness...40.00
Chrome headlight bezel....15.00 each
Hood "CHEVROLET" letters....25.00 for set theses bolt on.

Quote:

Originally Posted by Chevy Schadow

I need a Blazer fuel tube cover and a blue seat belt (female side).

Sorry, I don't have.

Quote:

Originally Posted by Blazerback72

I need outside right door handle
2 inside door handles
2 window crank handles
Please let me know if u still have thanks !

Yes
RH out side...15.00 DQ.
door and window handles 7.50 each

Quote:

Originally Posted by 67chevy4x4c

Do you have ebrake cable from brake pedal to the brake shoes ? And how much shipped to Bartley w va 24813

Year? 2wd or 4x4? Short or long box? K10 or K20?

Quote:

Originally Posted by TexasLS1

Any chance you have a factory Flywheel/Torque Converter Dust Cover for a TH350 Transmission?

Sorry, nothing. These seem to be always gone or broken.

Thanks, Tom

TexasLS1 · 11-29-2014, 02:04 PM

Quote:

Originally Posted by tll74

Sorry, nothing. These seem to be always gone or broken.

Thanks, Tom

Ok thanks for looking for me!

markmdz · 11-29-2014, 11:31 PM

Quote:

Originally Posted by tll74

Gas Pedal 10.00 std 15.00 deluxe
Dash pad (preferably black) no pads right now
Gauge Cluster "take out" cluster with gauges 50.00
Taillight Harness from cab to bumper 15.00
Headlight Harness...40.00
Chrome headlight bezel....15.00 each
Hood "CHEVROLET" letters....25.00 for set theses bolt on.

Thanks for the reply.

I like the gas pedal.
On the fence with the cluster, but leaning toward yes.
Taillight harness, I'll know more tomorrow afternoon after I get the chance to check it out.
Headlight harness, I just finished going through it after pulling it off the truck. Good news: the headlight harness is all good. Again, I'll know more tomorrow, but I'm seriously hoping I fixed the issues. If not, I may need the cabin harness.
Chrome bezels, I also like these.
Pass on the hood badge, as I don't want to drill any new holes and it's smooth right now.

BigRed76 · 12-02-2014, 11:27 PM

Would you happen to have a good set of saddle defrost vents?

**tll74** · 12-03-2014, 02:22 AM

Quote:

Originally Posted by yellowGT

I need a set of taillight lenses with the backup lenses as well. If you have any please let me know.

Also I need some trim pieces from a 72 chevy. I could send you a picture so you know what I'm talking about but they are the thick side molding with the wood grain in the middle.

Sure no problem. 12.50 each on the tail light lenses, 7.50 each on the late reverse lens and 10.00 each for the early (bullseye). plus 6.00 shipping. No need for pics on the moldings. Which ones do you need?

Quote:

Originally Posted by 54blackhornet

Tom you in LaGrande tomorrow ? If so bring parts ok...

Hey Jack, I sent you a text tonight. I'm leaving Thursday morning. I have your parts in the truck.

Quote:

Originally Posted by BigRed76

Would you happen to have a good set of saddle defrost vents?

Maybe , I'll look.

Thanks Guys, Tom

yellowGT · 12-03-2014, 09:49 PM

The two that go on the doors and the one that goes on driver side bedside closer to bumper.

**tll74** · 12-06-2014, 12:35 AM

Quote:

Originally Posted by BigRed76

Would you happen to have a good set of saddle defrost vents?

I looked for the vents and came up empty.

Quote:

Originally Posted by pimpston65

ok cool, if its 67 style i'll take the arm rest...

I looked and can't find it. I must have sold it. Sorry

Quote:

Originally Posted by yellowGT

The two that go on the doors and the one that goes on driver side bedside closer to bumper.

I have the door pieces and the fender piece. I'll get some pics.

Thanks, Tom

carrtrkk · 12-20-2014, 08:58 PM

Greetings
Do you have air cleaner bar that supports the air cleaner housing for 292 that sits across the valve cover

Mapearso · 12-21-2014, 12:31 AM

hello Tom. Looking for a few bits for my 72 SWB --

*Back window trim (and rubber
*complete shortbed upper & lower trim (-- I'll take misc pieces if you have, including longbed upper trim!)
*rear tailgate trim upper, left and right sides
*radio delete plate any color
*T3 headlights
*Very nice set of outer door handles
*1 AC vent ball, nice no pitting?

Thanks!!

danny69 · 12-21-2014, 09:41 PM

Do you still have the e brake cable from cab to the intermediate cable for swb I also need the intermediate cable too. What would it be shipped to 74801. Thanks. Danny

11-02-2014, 10:03 PM	#1
suville Registered User Join Date: Jun 2003 Location: Mtn. Home, Idaho Posts: 906	Re: 100's of misc parts from the last 6 trucks parted out *Got a pair of 6 cyl engine stands? Zip 83647 Thanks for your time*

11-04-2014, 07:51 PM	#2
69SCSS Registered User Join Date: Aug 2012 Location: Neskowin OR Posts: 1,153	Re: 100's of misc parts from the last 6 trucks parted out You have any of those ashtrays left? I need a dark green one, looks like the bottom one in your first pic. If so, shipping to 98661? Thanks, Al __________________ My 68 SWB Al Silveira Music <- My daughter loves this guy 8-)

11-04-2014, 09:40 PM	#3
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: 100's of misc parts from the last 6 trucks parted out is the 67-68 teal armrest still for sale? if so i'll take it

11-05-2014, 12:13 AM	#4
68Bowtie4x4 Registered User Join Date: Oct 2003 Location: Athena, Oregon Posts: 167	Re: 100's of misc parts from the last 6 trucks parted out Do you have any chrome heater control panels non-A/C that all the levers are good on? Please let me know ASAP. Thanks. __________________ 72 Chevy Cheyenne K10 4x4 LWB, 4" lift kit, 350/350/NP205, rebuild in progress.

11-10-2014, 02:14 AM	#5
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: 100's of misc parts from the last 6 trucks parted out Hello all, I was asked by Tom (tll74) to let everyone know that he will be available to respond to request after the 18th. He is away on a hunting trip currently. Thank you, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

11-10-2014, 08:11 AM	#6
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 449	Re: 100's of misc parts from the last 6 trucks parted out When you talk to him see when he will send my parts? Already paid and need them like last week. Thanks

11-10-2014, 07:32 PM	#9
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 449	Re: 100's of misc parts from the last 6 trucks parted out Thanks, and tell him good hunting. Ralph

12-03-2014, 06:57 AM	#10
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: 100's of misc parts from the last 6 trucks parted out ok cool, if its 67 style i'll take the arm rest...

11-26-2014, 04:06 PM	#11
markmdz Registered User Join Date: Nov 2014 Location: Newtown, CT Posts: 177	Re: 100's of misc parts from the last 6 trucks parted out In need of a few parts for my '68 C20: Gas Pedal Dash pad (preferably black) Gauge Cluster Taillight Harness Headlight Harness Chrome headlight bezel Hood "CHEVROLET" letters (are these stick on, or is there a post that goes into the hood) I'm sure the list will grow as I go through this truck. It's a new addition to me, so I have yet to really dig into it.

11-26-2014, 04:19 PM	#12
Chevy Schadow Registered User Join Date: Nov 2014 Location: Whitehouse, OH Posts: 59	Re: 100's of misc parts from the last 6 trucks parted out I need a Blazer fuel tube cover and a blue seat belt (female side).

11-26-2014, 04:58 PM	#13
Blazerback72 Registered User Join Date: Nov 2014 Location: Benbrook TX Posts: 38	Re: 100's of misc parts from the last 6 trucks parted out I need outside right door handle 2 inside door handles 2 window crank handles Please let me know if u still have thanks ! __________________ 72 Chevy cheyenne super short wide 350 69 SS Camaro 502 72 2wd Chevy Blazer (project) EVERY DAY IS A GOOD DAY IF YOUR ABOVE GROUND!!

11-26-2014, 06:31 PM	#14
67chevy4x4c Registered User Join Date: Jan 2012 Location: bartley w va Posts: 191	Re: 100's of misc parts from the last 6 trucks parted out Do you have ebrake cable from brake pedal to the brake shoes ? And how much shipped to Bartley w va 24813

11-26-2014, 07:51 PM	#15
TexasLS1 Registered User Join Date: Jul 2012 Location: Jonestown, TX Posts: 471	Re: 100's of misc parts from the last 6 trucks parted out Any chance you have a factory Flywheel/Torque Converter Dust Cover for a TH350 Transmission?

12-02-2014, 11:27 PM	#19
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: 100's of misc parts from the last 6 trucks parted out Would you happen to have a good set of saddle defrost vents? __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

12-03-2014, 09:49 PM	#21
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: 100's of misc parts from the last 6 trucks parted out The two that go on the doors and the one that goes on driver side bedside closer to bumper. __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3



Register or Log In To remove these advertisements.

12-20-2014, 08:58 PM	#23
carrtrkk Registered User Join Date: Jan 2014 Location: wenatchee,wa Posts: 3	Re: 100's of misc parts from the last 6 trucks parted out Greetings Do you have air cleaner bar that supports the air cleaner housing for 292 that sits across the valve cover

12-21-2014, 12:31 AM	#24
Mapearso Registered User Join Date: Oct 2008 Location: los angeles, ca Posts: 926	Re: 100's of misc parts from the last 6 trucks parted out hello Tom. Looking for a few bits for my 72 SWB -- Back window trim (and rubber complete shortbed upper & lower trim (-- I'll take misc pieces if you have, including longbed upper trim!) rear tailgate trim upper, left and right sides radio delete plate any color T3 headlights Very nice set of outer door handles *1 AC vent ball, nice no pitting? Thanks!!

12-21-2014, 09:41 PM	#25
danny69 Registered User Join Date: Nov 2014 Location: Shawnee, OK Posts: 155	Re: 100's of misc parts from the last 6 trucks parted out Do you still have the e brake cable from cab to the intermediate cable for swb I also need the intermediate cable too. What would it be shipped to 74801. Thanks. Danny

Register or Log In To remove these advertisements.