What did you do to your truck today.The 3rd chapter - Page 32 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**3757chevy** · 11-16-2019, 01:24 AM

Quote:

Originally Posted by RodnRudy

I switched from my summer wheels and tires to my "snow" wheels and tires today. I don't store the old girl for the winter but drive it whenever it's decent outside

Nice..I posted about the same on my Blazer yesterday in the blazer forum. I made a panel to cover the gap in front of my radiator and behind the core support .

crazyjeenyus · 11-28-2019, 08:01 PM

Quote:

Originally Posted by RodnRudy

I switched from my summer wheels and tires to my "snow" wheels and tires today. I don't store the old girl for the winter but drive it whenever it's decent outside

Nice truck, what is the name of the color?

**RodnRudy** · 11-28-2019, 10:00 PM

Quote:

Originally Posted by crazyjeenyus

Nice truck, what is the name of the color?

Original truck color was vermilion but was repainted,not too well I'll admit, by the PO a shade of maroon. She's a fine looking 30 footer. LOL

Chevys4life · 12-02-2019, 03:04 PM

Finally got my new rims, tires and hubcaps mounted on the old boy!!!!

sipper · 11-16-2019, 05:46 PM

Got my Truck back from the Painter.

Chevys4life · 11-16-2019, 06:31 PM

Quote:

Originally Posted by sipper

Got my Truck back from the Painter.

That's a nice color you selected for your truck. It's a good feeling when you get one of your projects back from the paint shop!!!!

Andy4639 · 11-16-2019, 07:33 PM

Quote:

Originally Posted by sipper

Got my Truck back from the Painter.

That sir is a good looking truck!

Andy4639 · 11-16-2019, 07:51 PM

I did some painting of small parts and I did some grille work on the 68. I think it's going to be fine once I clean it up and sand it down and primer it. The ramp truck makes a nice work area to by the way.
Oh I fixed my neighbor's tail lights for him on his 94 truck. He had no tail lights when he showed up. When he left he had all his lights working.

I had to work on the spot light on the ramp truck to it wouldn't come on. Had to take it a part and clean the contacts inside the light fixture and inside the handle. I also sprayed it down with lithium grease to make it move better.

70-Chevy · 11-16-2019, 08:52 PM

Installed the transmission, radiator and power steering hoses. Also installed the transmission dipstick, new filter and new pan cover.

cornerstone · 11-17-2019, 12:08 AM

Installed wiring harness today in hopes of test firing my engine. Also I temporarily installed the cab and front clip to ascertain where my computer, airbox, and battery will eventually go. I’m not sure if I want more of a factory look or a custom look under the hood.

Man, it feels good to look at something that resembles truck instead of only pieces of a truck!

66clow · 11-17-2019, 07:51 AM

This week I wet sand and buffed the truck. Yesterday I painted the seat cover for now. I struggled with a color to eventually do my seat. I think black leather would be fine.

Ken O. · 11-17-2019, 11:08 PM

picked up a replacement motor for the GMC. 350 with camel hump heads. It was in a T-Bucket but only ran a few hours and he replaced it with something else. Sat for a couple years. I'll put a different cam in and new accessory brackets on and $$ dictates what else.

Squrl78 · 11-23-2019, 10:46 AM

Decide it would be fun to pull my vintage camper with my vintage truck.

**HO455** · 11-23-2019, 10:49 AM

Quote:

Originally Posted by Squrl78

Decide it would be fun to pull my vintage camper with my vintage truck.

Cool!

**SoCoC10** · 11-21-2019, 10:51 PM

Started to reassemble the 71 K10 shorty.

66clow · 11-23-2019, 04:43 PM

Painted my seat belts to finish my cheapo seat and seatbelt resto.

bean · 11-23-2019, 08:24 PM

Your seats and belts look awesome! Great job!

67C10Step · 11-23-2019, 10:06 PM

Put new bushings in my trailing arms and put them back in. Ordered springs, trac bar, spring retainers, and shock relocation kit from summit. Tore down drive shaft for paint, u joints, and. center bearing.

**SoCoC10** · 11-28-2019, 08:48 AM

Got all the new weatherstrip and seals installed. All the glass back in and polished some chrome on the K10 shorty.

Happy_dan · 11-28-2019, 09:07 AM

Looks awesome

**Ol Blue K20** · 11-28-2019, 10:22 AM

Looking good, gonna be a complete truck soon.

67C10Step · 12-02-2019, 04:07 PM

Thanks. Since bodywork and paint will be dead last I told my nephew this weekend that when it gets road worthy it will look much better underneath than on top!

67C10Step · 12-03-2019, 06:27 PM

Grmpy - you and I should be neighbors. That is exactly how my projects seem to go. Start small and scope creep sets in right off the bat. The end product is always nice but usually more time and money than originally thought.

Andy - where did you get the seals and who is the maker?

Andy4639 · 12-03-2019, 07:22 PM

Quote:

Originally Posted by 67C10Step

Grmpy - you and I should be neighbors. That is exactly how my projects seem to go. Start small and scope creep sets in right off the bat. The end product is always nice but usually more time and money than originally thought.

Andy - where did you get the seals and who is the maker?

I ordered them from GMCPauls website. Per their site.
Manufactured by Precision With Manufacturers Lifetime Warranty

**71CHEVYSHORTBED402** · 12-08-2019, 03:01 AM

Told the guy light blue he brings me an

Ochre bed.

JK, the guy does good work. This is the first stage on the bed, though the underside and inside are done. We finished the body dry run, drilled for the tail bezels and lower molding. We'll work on the side moldings next time. Someone stuffed a LH upper tailgate molding in a RH NOS bag. Long story I got three LH, no RH

12-02-2019, 03:04 PM	#4
Chevys4life Registered User Join Date: Jun 2018 Location: Washington, DC Posts: 667	Re: What did you do to your truck today.The 3rd chapter Finally got my new rims, tires and hubcaps mounted on the old boy!!!! Attached Images

11-16-2019, 05:46 PM	#5
sipper Registered User Join Date: Oct 2015 Location: wyoming ontario Posts: 40	Re: What did you do to your truck today.The 3rd chapter Got my Truck back from the Painter. Attached Images

11-16-2019, 07:51 PM	#8
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: What did you do to your truck today.The 3rd chapter I did some painting of small parts and I did some grille work on the 68. I think it's going to be fine once I clean it up and sand it down and primer it. The ramp truck makes a nice work area to by the way. Oh I fixed my neighbor's tail lights for him on his 94 truck. He had no tail lights when he showed up. When he left he had all his lights working. I had to work on the spot light on the ramp truck to it wouldn't come on. Had to take it a part and clean the contacts inside the light fixture and inside the handle. I also sprayed it down with lithium grease to make it move better. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-16-2019, 08:52 PM	#9
70-Chevy -Chris Join Date: Sep 2002 Location: Moyock, NC Posts: 622	Re: What did you do to your truck today.The 3rd chapter Installed the transmission, radiator and power steering hoses. Also installed the transmission dipstick, new filter and new pan cover. Attached Images __________________ 1970 Chevy C-10 P/U, Shortbed, Fleetside - 5/7 drop, 496, TH400, 12 bolt. BUILD THREAD - http://67-72chevytrucks.com/vboard/s...d.php?t=404481 2012 F250 Super Duty P/U - intake, exhaust, tuner, 4" lift with 35's 2017 Chevy Suburban (Wifes Car) - Fully Loaded & Stock "Some people spend an entire lifetime wondering if they made a difference in the world. But, the Marines don't have that problem." Ronald Reagan, President of the United States; 1985

11-17-2019, 12:08 AM	#10
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: What did you do to your truck today.The 3rd chapter Installed wiring harness today in hopes of test firing my engine. Also I temporarily installed the cab and front clip to ascertain where my computer, airbox, and battery will eventually go. I’m not sure if I want more of a factory look or a custom look under the hood. Man, it feels good to look at something that resembles truck instead of only pieces of a truck! Attached Images __________________ Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod.

11-17-2019, 07:51 AM	#11
66clow Registered User Join Date: Jun 2012 Location: Clearwater Beach Florida Posts: 872	Re: What did you do to your truck today.The 3rd chapter This week I wet sand and buffed the truck. Yesterday I painted the seat cover for now. I struggled with a color to eventually do my seat. I think black leather would be fine. Attached Images Last edited by 66clow; 11-17-2019 at 08:14 AM.

11-17-2019, 11:08 PM	#12
Ken O. Registered User Join Date: Jan 2016 Location: Spokane WA Posts: 106	Re: What did you do to your truck today.The 3rd chapter picked up a replacement motor for the GMC. 350 with camel hump heads. It was in a T-Bucket but only ran a few hours and he replaced it with something else. Sat for a couple years. I'll put a different cam in and new accessory brackets on and $$ dictates what else. Attached Images

11-23-2019, 10:46 AM	#13
Squrl78 Registered User Join Date: Oct 2018 Location: Bethalto, Il Posts: 1	Re: What did you do to your truck today.The 3rd chapter Decide it would be fun to pull my vintage camper with my vintage truck. Attached Images

11-21-2019, 10:51 PM	#15
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,303	Re: What did you do to your truck today.The 3rd chapter Started to reassemble the 71 K10 shorty. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count Last edited by SoCoC10; 11-22-2019 at 08:24 PM.

11-23-2019, 04:43 PM	#16
66clow Registered User Join Date: Jun 2012 Location: Clearwater Beach Florida Posts: 872	Re: What did you do to your truck today.The 3rd chapter Painted my seat belts to finish my cheapo seat and seatbelt resto. Attached Images

11-23-2019, 08:24 PM	#17
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 920	Re: What did you do to your truck today.The 3rd chapter Your seats and belts look awesome! Great job!

11-23-2019, 10:06 PM	#18
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,471	Re: What did you do to your truck today.The 3rd chapter Put new bushings in my trailing arms and put them back in. Ordered springs, trac bar, spring retainers, and shock relocation kit from summit. Tore down drive shaft for paint, u joints, and. center bearing. Attached Images __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra

11-28-2019, 08:48 AM	#19
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,303	Re: What did you do to your truck today.The 3rd chapter Got all the new weatherstrip and seals installed. All the glass back in and polished some chrome on the K10 shorty. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

11-28-2019, 09:07 AM	#20
Happy_dan Registered User Join Date: Jul 2019 Location: New Boston, NH Posts: 456	Re: What did you do to your truck today.The 3rd chapter Looks awesome __________________ 1968 C-20 CST Vermillion http://imageevent.com/happy_dan/dantoys/68c20 2019 Silverado 2012 Camaro ZL1

11-28-2019, 10:22 AM	#21
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,242	Re: What did you do to your truck today.The 3rd chapter Looking good, gonna be a complete truck soon. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul



Register or Log In To remove these advertisements.

12-02-2019, 04:07 PM	#22
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,471	Re: What did you do to your truck today.The 3rd chapter Thanks. Since bodywork and paint will be dead last I told my nephew this weekend that when it gets road worthy it will look much better underneath than on top! __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra

12-03-2019, 06:27 PM	#23
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,471	Re: What did you do to your truck today.The 3rd chapter Grmpy - you and I should be neighbors. That is exactly how my projects seem to go. Start small and scope creep sets in right off the bat. The end product is always nice but usually more time and money than originally thought. Andy - where did you get the seals and who is the maker? __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra

12-08-2019, 03:01 AM	#25
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,292	Re: What did you do to your truck today.The 3rd chapter Told the guy light blue he brings me an Ochre bed. JK, the guy does good work. This is the first stage on the bed, though the underside and inside are done. We finished the body dry run, drilled for the tail bezels and lower molding. We'll work on the side moldings next time. Someone stuffed a LH upper tailgate molding in a RH NOS bag. Long story I got three LH, no RH Attached Images __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025 Last edited by 71CHEVYSHORTBED402; 12-08-2019 at 03:07 AM.

Register or Log In To remove these advertisements.