What did you do to your truck today.The 3rd chapter - Page 32 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**dflarsen77** · 08-23-2019, 06:12 PM

How much is R12 going for. The shop I talked to madd it sound like a hundred bucks a pound if you can find it.

Ken O. · 08-23-2019, 06:20 PM

Just spent a crapload of $$ to get the tranny fixed in the 96 Silverado (along with a transfer case seal, rear main seal and new U-joints) so I can drive it instead of using my 67 GMC as a daily driver.

Astro-Balls · 08-23-2019, 07:09 PM

Removed front and back glass for Upper cab paint this weekend, new glass to install and new door weatherstrips.
Minimal rust found which is always a plus.

72c20customcamper · 08-24-2019, 08:07 AM

Quote:

Originally Posted by dflarsen77

How much is R12 going for. The shop I talked to madd it sound like a hundred bucks a pound if you can find it.

When they instituted the ban on r12 we bought a 4 or 5 30lbs cylinders for real cheap just before the cut off date. The distributor wanted to get rid off it before he had to eat them. Still have 2 left and the open one. . I do have my uncles recovery system . So I reuse the old and just top off with new.

Vendor at the truck nationals was selling one pound disposable cans for 40$

CG · 08-24-2019, 08:43 AM

Nothing ... again

67C10Step · 08-24-2019, 03:02 PM

In the process of disassembling the step side bed. Got all the old wood out and the fenders and steps off.

Bed sides probably usable as well as the sills. Bed front and rear cross sill will have to be replaced. Few more bolts and I’ll have it all apart. Will probably jump to cleaning up rear frame and do rear brake and suspension work before tackling stripping the bed for primer.

**Boog** · 08-24-2019, 03:42 PM

turn

**Boog** · 08-24-2019, 03:56 PM

I have my step bed nearly as disassembled as yours. I bought a new headboard, cross sills, corner angle strips and floor strips for mine along with all new hardware. My bed sides are in pretty good shape. I hope to blow mine apart before long and get all that done.

67C10Step · 08-24-2019, 05:47 PM

Boog,
Where did you order your bed parts? I’ll need angle strips as well. And all the bed wood and hardware as well but I’d like to get all the metal parts first.

Getting this apart for easy access to the rear frame to do brakes, springs, and all the usual stuff.

CamTra · 08-24-2019, 06:02 PM

Got her off the trailer and started my plans for a build. Made a deal to have a 454 built for her. Started planning my drum to disc swap and in my mind decided to paint her bright red instead of the dark maroon color. Will build her with my 21 year old son, so I'm excited to get started.

BigBird05 · 08-24-2019, 08:12 PM

I started drilling out about a 1,000 spot welds on the donor lower cowl vent. Then I can drill out the one on my truck. Going to replace the rusted cowl.

**Boog** · 08-24-2019, 09:20 PM

Quote:

Originally Posted by 67C10Step

Boog,
Where did you order your bed parts? I’ll need angle strips as well. And all the bed wood and hardware as well but I’d like to get all the metal parts first.

Getting this apart for easy access to the rear frame to do brakes, springs, and all the usual stuff.

I bought my metal from LMC. I haven't bought the wood yet. I'll probably cut my own again.

72c20customcamper · 08-25-2019, 02:46 PM

Finished up the air box .

**Thrill4130** · 08-25-2019, 10:54 PM

Fixing some wing windows for my shortbed. Replaced the locking part that wraps around the glass on 67’s. Waiting on rubber and more rivets.
Posted via Mobile Device

**Thrill4130** · 08-25-2019, 10:55 PM

Quote:

Originally Posted by Thrill4130

Fixing some wing windows for my shortbed. Replaced the locking part that wraps around the glass on 67’s. Waiting on rubber and more rivets.
Posted via Mobile Device

Posted via Mobile Device

66clow · 08-26-2019, 09:37 AM

Made a apron bracket, finished making my filler panels(still need to paint them) and cleaned her up.

70-Chevy · 08-26-2019, 10:21 AM

Started putting on the Wilwood disc brake kit on the rear end until I realized I had the wrong Moser axles.....so, I went ahead and put the front bumper on and got a brake pedal assembly coming from SpecialyRetail this week. Going back at it next weekend....

72c20customcamper · 08-26-2019, 07:04 PM

Finished up the passenger door piller

66clow · 08-26-2019, 07:50 PM

Removed the snorkel

c10 71 · 08-26-2019, 08:36 PM

So I carefully cut the frame

lintcollector · 08-26-2019, 11:31 PM

Took it around the block for the first time ever. Felt GREAT!

lintcollector · 08-27-2019, 10:37 AM

Love that idea to get it up higher off the ground, might have to make my own!

Do they just stack up, or do you have them anchored together somehow?

72c20customcamper · 08-27-2019, 04:36 PM

Hung the radiator support and bolted on the door and fender . Both OEM pieces everything lined up pretty well even the rocker with a few 5 pound sledgehammer plows on a 2x4 . Came to the cab corner . It was a cluster ###! . It was almost like it was for an extended cab . Had to cut it into 3 pizza slices just to get it to line up. 5 hours I would rather not repeat. Other side is getting a few small pieces.

If anyone is doing cab corners stay away from the CHL brand

Barnfind46 · 08-27-2019, 04:58 PM

The Chevy trucks in Taiwan are different than ours. He He!

OregonNed · 08-30-2019, 08:47 AM

A friend helped me along in my interior project by painting these interior parts for me

08-23-2019, 06:12 PM	#776
dflarsen77 Active Member Join Date: Jun 2016 Location: Salida, CA Posts: 177	Re: What did you do to your truck today.The 3rd chapter How much is R12 going for. The shop I talked to madd it sound like a hundred bucks a pound if you can find it. __________________ David Larsen 1970 Chevrolet C-10

08-23-2019, 06:20 PM	#777
Ken O. Registered User Join Date: Jan 2016 Location: Spokane WA Posts: 106	Re: What did you do to your truck today.The 3rd chapter Just spent a crapload of $$ to get the tranny fixed in the 96 Silverado (along with a transfer case seal, rear main seal and new U-joints) so I can drive it instead of using my 67 GMC as a daily driver.

08-23-2019, 07:09 PM	#778
Astro-Balls Registered User Join Date: Feb 2019 Location: Nor Cal Posts: 822	Re: What did you do to your truck today.The 3rd chapter Removed front and back glass for Upper cab paint this weekend, new glass to install and new door weatherstrips. Minimal rust found which is always a plus. __________________ 1968 C20 Fleetside 396 4sp PS PB AC CST . https://www.youtube.com/watch?v=RWK8GgWD4uA

08-24-2019, 08:43 AM	#780
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,992	Re: What did you do to your truck today.The 3rd chapter Nothing ... again

08-24-2019, 03:02 PM	#781
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,471	Re: What did you do to your truck today.The 3rd chapter In the process of disassembling the step side bed. Got all the old wood out and the fenders and steps off. Bed sides probably usable as well as the sills. Bed front and rear cross sill will have to be replaced. Few more bolts and I’ll have it all apart. Will probably jump to cleaning up rear frame and do rear brake and suspension work before tackling stripping the bed for primer. Attached Images

08-24-2019, 03:42 PM	#782
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,453	Re: What did you do to your truck today.The 3rd chapter turn Attached Images __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

08-24-2019, 03:56 PM	#783
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,453	Re: What did you do to your truck today.The 3rd chapter I have my step bed nearly as disassembled as yours. I bought a new headboard, cross sills, corner angle strips and floor strips for mine along with all new hardware. My bed sides are in pretty good shape. I hope to blow mine apart before long and get all that done. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

08-24-2019, 05:47 PM	#784
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,471	Re: What did you do to your truck today.The 3rd chapter Boog, Where did you order your bed parts? I’ll need angle strips as well. And all the bed wood and hardware as well but I’d like to get all the metal parts first. Getting this apart for easy access to the rear frame to do brakes, springs, and all the usual stuff.

08-24-2019, 06:02 PM	#785
CamTra Registered User Join Date: Aug 2019 Location: Livingston, La Posts: 56	Re: What did you do to your truck today.The 3rd chapter Got her off the trailer and started my plans for a build. Made a deal to have a 454 built for her. Started planning my drum to disc swap and in my mind decided to paint her bright red instead of the dark maroon color. Will build her with my 21 year old son, so I'm excited to get started. Attached Images

08-24-2019, 08:12 PM	#786
BigBird05 Registered User Join Date: Aug 2019 Location: Cheraw Posts: 1,300	Re: What did you do to your truck today.The 3rd chapter I started drilling out about a 1,000 spot welds on the donor lower cowl vent. Then I can drill out the one on my truck. Going to replace the rusted cowl.

08-25-2019, 02:46 PM	#788
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,641	Re: What did you do to your truck today.The 3rd chapter Finished up the air box . Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

08-25-2019, 10:54 PM	#789
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 197	Fixing some wing windows for my shortbed. Replaced the locking part that wraps around the glass on 67’s. Waiting on rubber and more rivets. Posted via Mobile Device

08-26-2019, 09:37 AM	#791
66clow Registered User Join Date: Jun 2012 Location: Clearwater Beach Florida Posts: 872	Re: What did you do to your truck today.The 3rd chapter Made a apron bracket, finished making my filler panels(still need to paint them) and cleaned her up. Attached Images

08-26-2019, 10:21 AM	#792
70-Chevy -Chris Join Date: Sep 2002 Location: Moyock, NC Posts: 622	Re: What did you do to your truck today.The 3rd chapter Started putting on the Wilwood disc brake kit on the rear end until I realized I had the wrong Moser axles.....so, I went ahead and put the front bumper on and got a brake pedal assembly coming from SpecialyRetail this week. Going back at it next weekend.... __________________ 1970 Chevy C-10 P/U, Shortbed, Fleetside - 5/7 drop, 496, TH400, 12 bolt. BUILD THREAD - http://67-72chevytrucks.com/vboard/s...d.php?t=404481 2012 F250 Super Duty P/U - intake, exhaust, tuner, 4" lift with 35's 2017 Chevy Suburban (Wifes Car) - Fully Loaded & Stock "Some people spend an entire lifetime wondering if they made a difference in the world. But, the Marines don't have that problem." Ronald Reagan, President of the United States; 1985

08-26-2019, 07:04 PM	#793
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,641	Re: What did you do to your truck today.The 3rd chapter Finished up the passenger door piller Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.



Register or Log In To remove these advertisements.

08-26-2019, 07:50 PM	#794
66clow Registered User Join Date: Jun 2012 Location: Clearwater Beach Florida Posts: 872	Re: What did you do to your truck today.The 3rd chapter Removed the snorkel Attached Images

08-26-2019, 08:36 PM	#795
c10 71 Registered User Join Date: Jun 2014 Location: NY Posts: 6	Re: What did you do to your truck today.The 3rd chapter So I carefully cut the frame

08-26-2019, 11:31 PM	#796
lintcollector Registered User Join Date: Sep 2018 Location: West Jordan, UT Posts: 71	Re: What did you do to your truck today.The 3rd chapter Took it around the block for the first time ever. Felt GREAT! __________________ Thx, Lintcollector '72 C10 Fleetside Big Block See my build thread here: http://67-72chevytrucks.com/vboard/s...d.php?t=771552

08-27-2019, 10:37 AM	#797
lintcollector Registered User Join Date: Sep 2018 Location: West Jordan, UT Posts: 71	Re: What did you do to your truck today.The 3rd chapter Love that idea to get it up higher off the ground, might have to make my own! Do they just stack up, or do you have them anchored together somehow? __________________ Thx, Lintcollector '72 C10 Fleetside Big Block See my build thread here: http://67-72chevytrucks.com/vboard/s...d.php?t=771552

08-27-2019, 04:36 PM	#798
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,641	Re: What did you do to your truck today.The 3rd chapter Hung the radiator support and bolted on the door and fender . Both OEM pieces everything lined up pretty well even the rocker with a few 5 pound sledgehammer plows on a 2x4 . Came to the cab corner . It was a cluster ###! . It was almost like it was for an extended cab . Had to cut it into 3 pizza slices just to get it to line up. 5 hours I would rather not repeat. Other side is getting a few small pieces. If anyone is doing cab corners stay away from the CHL brand Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

08-27-2019, 04:58 PM	#799
Barnfind46 Registered User Join Date: Aug 2014 Location: Mena,Arkansas Posts: 485	Re: What did you do to your truck today.The 3rd chapter The Chevy trucks in Taiwan are different than ours. He He! __________________ 68' with no bells or whistles unless I add'em.

08-30-2019, 08:47 AM	#800
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today.The 3rd chapter A friend helped me along in my interior project by painting these interior parts for me Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

Register or Log In To remove these advertisements.