![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#776 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Last big entry of photos.
These detail pics I like because they take more than a day to become what they are. ![]() ![]() My favourite pic from today. ![]() ![]() Moss Alarm ? ![]() ![]() ![]() Gelcoat/paint. Needs a clean for sure. ![]() Even the wheels that were on it, on the wall side for the last 6 years show their age. ![]() . Eventually became time to leave. Bill and Gordon followed Fil and Nikki for a while. Spotted and snapped by Bill, this lady scrambled for her phone to take a photo of the van and trailer, wonder why? ![]() ![]() .I will copy and paste Fil’s travel report of their first leg of the return trip in a bit. Hope some of you are still awake and tasking note.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#777 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Few more pics from Mrs S
Our official trip photographer Tonight the Rezin Rockit sleeps here. ![]() Pretty place ![]() ![]() Dinner in the go. ![]() No, this is not all there is. ![]() Chef. Photographer. Co-driver, Tired. And a big part of the trip as Fils sidekick. ![]() Observers have commented that the registration implies Grin factor Lets hope so. ![]() Support from all over too. ![]() I am grinning in anticipation here.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#778 | |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Copy and paste of Fil’s report tonight from where they have struck camp.
Quote:
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
|
![]() |
![]() |
![]() |
#779 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Ready for the next leg, down to Kent.
Three wipers should clean the screen pretty well. ETA at a lazy pace with stops for coffee etc is 3.00 to 4.00pm just when I have an hours training online. Let’s hope it is 4.00pm .
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#780 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
So the AA man got there pronto to replace the tyre.
![]() Oooops. Commercial tyre. No can do it seems. ![]() ![]() So John, the good man he is started to call around and managed to locate a tyre and someone who can fit it. I am expecting a fist sized hole to be torn through my wallet and then my ring to be significantly stretched. But we are at their mercy. Would be nice if not the case. ![]() In the mean time Fil stretches his legs. ![]() While Nikki gets on with her studies. ![]() In the mean time I get a PM from a stranger. Proving again, life is good and that this is an amazing community. The story continues. Stay tuned.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#781 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
So......
![]() Because commercial tyre needed. ![]() Up she goes. ![]() Removed dead one ![]() Fitted new one ![]() Back on the trailer. ![]() And 3.5 hours later. And £162.00 or $210.00 or ZA R3510.00 For the pleasure later. Straight into the afternoon traffic and a delay. Next will be the afternoon M25 tango in the slow lane. ![]() My debt to Fil and Nikki continues to grow exponentially it seems. I signed up for this, so I will play the game out. .
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#782 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Quick confession.........
I had my usual bad nights sleep. But when I came down this morning, I saw this........ I was playing with my knob before going to bed last night. Thanks to Bill for sending it down. Paul Walker Fast and Furious item. ![]() So having taken the day off work today, I have a load of odd jobs to do, meaning I will not get to play with the Rezin Rockit until much later. Bill managed to find the other two alloys that go with the pair fitted, under a serious pile of junk at the body shop, destined for the scrappy. So he never told me and when it arrived here, along with a real Ford spare, it was a great surprise. So getting some used tyres on them is a priority for today. Last for now...... But not the least. @CraigRK sent me this pic early this morning. No idea where he found it. But super appropriate. May as well make it the official logo for the Rezin Rockit ![]() Later guys.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#783 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
At last, 26 hrs late.
Sorry team. So the last pic from the road, before they rolled up to my place was this...... ![]() So I set up with phone on video to capture the arrival. And photos for the story. ![]() By the time had done faffing with[hotels for you guys, Fil who had had a long, stressful day, was already at it. ![]() I was pleased with what I saw of course. ![]() Once unloaded, we pushed it through to the back of the kitchen. This thing is incredibly light too, I was surprised. ![]() After unloading, I hooked the Galaxy up and took the trailer up to the farm where the owner lives. ![]() They did not hear me, or the dogs knocking, and it took me 20 minutes to get Nick to answer the door. A quick chat and road report, had me telling him the one tyre had let go on the motorway, but been replaced en-route. Mainly to make sure he checked the others as usually if one goes, the rest are shortly to follow. Here is where the story changes direction for the good, in fact, for the great...... He asked in surprise how much it had been ( Do remember that I had already paid for it and was happy to take responsibility) old rule of borrowing: “You bend it, You mend it” so not a problem. I had told Fil when it happened to just do whatever needed to be done. So he insisted that he reimburse me for the cost, I declined, he insisted, I declined again, he walked away to the house, and I started to drive to the gat, and he came out with cash in hand, saying it was his trailer and would have been his cost in any case in 800 miles had I not used it. After once more declining the money, he said that it would displease him if I did not take the money, I had also offered to go half and half with him. I guess for a guy with a 4 week old Tesla, an Audi R8 , Bentley and Range Rover plus a few very nice motorbikes on his drive, who still does his own bodywork and is currently restoring an older Jeep CJ for his wife, this is not a biggie. To me, the cash was already spent when Fil had the blow out, however, this once again reiterated the nature of this hobby and the people who inhabit this space. So, result. After getting back and parking the Galaxy, we decided Fish nd Chips we’re in order, rather than me making dinner. We sat chatting till quite late, after which Fil and Nikki Headed for the camper, as they declined the indoors. My night sucked as usual, but I woke to a real nice lazy sunrise. Looking out the bedroom window my eye was instantly drawn to the Rezin Rockit. ![]() For now, it is early days and like a toddler it will take time to find its feet. Becoming a Teenager later, though still not quite knowing its ultimate destiny or even having a real identity. My day was filled with a load of small unrelated jobs and I did not get to touch it till about 3.30 this afternoon. More later.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#784 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
So after coffee, chats etc, Fil and Nikki left for Cambridge around 10.30 or so.
But not after he and Mickey carried the RX8 seats down to the garage and plonked them in the Chevy C10 cab. Looks good, trust me. Wrapped up, thanks to Bill who is a fan of protection I also noted that some big wheels mush have called these arches home at some point, with this sort of damage against the body up front. Fast forward to this afternoon, after shopping and trying to find a few things, including some free/cheap used tyres for the two alloys Bill had dug out to roll the car around on. One guy offered to fit me some for £40.00 after the guys at my usual tyre shop, used for all the Galaxy and Berlingo’s new tyres, was not there today. I will go back tomorrow morning early to see if they can help In the mean time........ I had to start messing around. ![]() Front end hub, A-arms look tiny compared to my Chevy Blazer and the C10 items. All rubbers and bushes seem to need replacement and servicing too, and if this thing is to become an antisocial animal, it will need to handle safely. I trust the service items will be [font color="e6198a"]aFORDable[/font] Small little components. So on closer inspection, it seemed the front drivers side has one stud broken off, I found it inside a nut, in the leaves and rubbish in the tub. Tyres are 195 rear, and 205 in the front. Amazingly still do not come close to filling the gap. Really interesting modification on the passenger rear rear hub and wheel to make two nuts fit a non standard steel wheel. Two studs removed, leaving two. Two nuts again, as it seems to be the case all around the Rockit Passenger side front wheel is totally flat. I tried to fit the spare steel that Bill had sent along, only to find it does not fit the disc brake setup once bolted in, everything was locked tight. Burger ! So after not getting tyres, Sally and I (she is a patient girl) went to Small Ford Centre in Chatham and I got some wheel nuts, to replace the many missing ones, and to get a set that were all the same. 50p per item, equalled £8.00 in wheel it’s. Only problem is that they are for steel wheels. Fail. Well not a com-let’s failure, I do like some steels on these as well, so will keep them for future use. Sally’s son Ryan came around to look as well, he is very intrigued, being a 20 year old in a 1.6 diesel Fiesta, that’s already significantly modified, His,first question when O said the roll bar was getting removed, was “What are you going to do with it” and his eyes looked like those of a magpie. I want to find a thicker diameter,roll bar, and possibly mount it with a slight rearward tilt. He also gave me some alloy wheel nuts he had got for his previous Fiesta, the tapered cones are solid, and I am not sure if they are meant to be the “loose type” of cones, any advice? Almost midnight, bed time. Amazed that two weeks ago Bill had gone to look at this thing that had been offered to me for sale, and now it is on my,drive. More tomorrow for those,who are in need of a fix, or still watching.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#785 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Thought I would quickly update the cost of fetching it so far.
I had agreed to pay Fil’s diesel in the Sprinter van for fetching the car in Scotland. But his and everyone else involved’ s contribution is priceless and most people really don’t get it fully. I also offered to pay for sausage rolls on the trip, he declined as they had a fridge full of food in the camper van. Fil took a load of used double glazed windows and a Honda CG125 in a box up. Bike was sold for £60.00 to a friend, cash into kitty. Trip was 1074.7 miles, door to door Fuel total £247.18 Making it 23p per mile Subtracting £60.00,from the bike. That I had paid for 5 years ago. Left £187.18 to pay Car was £350.00 with so much work to do, and a lot more missing than just engine and transmission. RX8 seats,,still to be made to fit £70.00 thanks to Bill. Wheel nuts £8.00 Two tyres on the alloys who knows, I will find out later. This will cost a fair amount to get to MOT level, and on the road safely, but hopefully it will be fun nd teach me more new,stuff. Priceless. Oh, and you guys get to laugh at me. Woke to this today. Not done a whole lot yet, been helping Tom the lodger sort stuff out. ![]()
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#786 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
So late afternoon yesterday after getting back from shops and various jobs, Sally and I were able to start on looking at, and cleaning the Piggy.
She continues to surprise me. By the time I came out the house after doing some work stuff that needed to be dealt with, this is what I found. And the back of it looking like this ![]() So proceeded to get a brush, wheelie bin and scoop..... About 1/3 of the bin filled with leaves and debris. ![]() Moss next, and leaves under the hood. How does it all get in there? ![]() After all this, I went to get my pressure cleaner, forgetting that it really does not work anymore, resulting in waking Mickey up from his 6.00pm post pub sleep, he was zonked. Got his cleaner and then proceeded with the job for an hour or so. ![]() Only got the rear half done, as it turned cold and light was fading. But happy so far. Need to do the rest today. Starting with it looking like this....... Pressure cleaner left it like this, after intense, close up cleaning Much better, but still not right. I thought I would try a trick I used on the Chevy Blazer glassfibre roof before. Domestos bleach gel, brushed on neat, washed off after 5 minutes, removes the staining, giving a much nicer look. So off to the tyre place next, then back to pressure clean the rest of it, followed by bleach to remove the stains after that, and another pass with the pressure cleaner to remove it all. Hope to get that all done today.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#787 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Back from town.
12 miles to joy. Two used tyres fitted for cost of a “drink” Happy with that. Now for the front half with the pressure cleaner after fitting the alloys quickly. Did forget to go to Halfords to grab a can of Arizona Gold to try out on one side. Job for another day maybe.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#788 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
So I went to town this morning to see if I could get some used tyres fitted to the alloys Bill got me.
Also saw this, sign of the times. So I got the wheels sorted for a “drink” as the shop was empty, and to be honest, the tyre shops pay for disposal of used tyres. 5 minutes, in and out. Mate Craig collected my 50p purchase for me. 500kg capacity, means lifting The front or rear individually/independently on the Rezin Rockit is easy to do. ![]() Back home the new wheels could go onto the Rockit, removing the steels that really we’re not quite delivering. I also,knocked out the Stud that had been broken off. Will replace it and the two from the rear hub. Of course stuff like the brake,Cali per, broken off, along with its brake line, needs refurbishment and replace ing. So much work to be done to get this Nack on the road. Rough as a badgers butt. ![]() Right.... Any cartoonist or commercial type artist on here? ![]() I really like these designs. ![]() But I would like a naive logo for the Rezin Rockit that represents all of this, the Jeep roots etc. PM me if you know someone clever and artistic please.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#789 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Seen in 2015 in Austin, Texas.
That's a hood ornament. ![]() Notice also the flying pig hanging from the rear view mirror. ![]()
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#790 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Still trying to catch back up to real time.
Only 16 hours behind now. Getting some tidying up done was high on the agenda. Found some interesting “details” in the design and build. Can you see it? ![]() I also removed most of the original radio and interior light, rear view mirror mess. Need to try get these two parallel bars out as well, Bill whacked his head on them twice, I am still due to do it. ![]() Also removed most of the seatbelts and mounts from the rear, and despite the bloody long bar, still could not get the roll bar shifted. The seat belt cassettes are on the same mounts. Will try again today when it warms up, and after the bleach job. Certainly do not want or like this bull bar. Heavy and unsightly, plus rusted through under plastic coating. And if it is on a diet, this will help. Some serious bolts keeping it all together. Better? Other side? The moss stains were really resistant. ![]() Last bit. Anyone know what these lights are from? Body and internals on this one rotted away completely, so need replacing. I prefer to replace like for like. ![]() Lens after cleaning out the rust stains. Certainly can be refitted. ![]() Actually pleased that I could also do the whole engine bay, behind the grille, under the hood etc. Does my butt look big in this? From up high. Not that there is any money, but yesterday’s Money Shot. Some change so far. So, now it is Sunday 9.25 and the next job is a coffee, walk around the Rezin Rockit for some silly grinning and dreaming. Then get on with the bleach. Followed by one more run with the pressure cleaner. Anyone see hope? .
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#791 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
So......
Bleach city. Big brush, generous application Once All done, leave it to stand for a few minutes. Then pressure cleaner again. Resulting in this. Dulled right now, but I am sure that there will be some polish to bring a bit of a chime back. ![]() The only damage on the whole car, not too bad for a driven car from 1992 I also took off the centre bars between the roll bar and front screen. After all of this, I also added the rear lens that I got from @spacekaddett To the back end. Front end view. Happy After this, I rounded Sally up to come help me with the next job. She really is a good person to abuse.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#792 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Opinions again.
I do not have any of the stuff needed yet, and not given the it a lot of technical consideration. But. I a, thinking a simple, hinged pipe bar where the yellow masking tape lies. Then attached to it, a racing style window net (re-used, recycled) hanging down on a 5mm to 10mm Max rod shaped frame for it to be attached to. 99% visual, racer style. Not really an airbag or soft plush cushion. I also thought that buying some nylon webbing and stitching it all together by hand was an option, albeit not a clever one. Opinions?
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#793 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
So my helper hates a photo, no matter why.
Still, fooled her. The old seatbelt mounts were attached at the same points as the roll bar rear mounts. They were rotten and needed to come out, so I crawled underneath and let Sally drive the 3 foot breaker bar and about 5 extensions. Got them, and the rotten carpet and under felt out. Then cleaned up again, how many times have I cleaned this out. Other way. Looking at the base, behind the seats, where the seatbelt mounting nuts are welded in, it became apparent that this was not a safe place, and my newly bent and laid out roll bar would be a good idea. But first a bit of fun. I had enough of doing the real job of cleaning and prepping. There would be more to come.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#794 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Lunch time action.
Micky loves this sort of thing. Today we were back to full social distancing, and it felt so stupid for me to wear a face covering as he is isolating. Rear end, looks different, coz it is. Front again So the next trick will be finding some 60mm to 70mm Outside diameter pipe and a pipe bender to make a new roll bar, differently configured. More in a bit.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#795 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
So after all the stuff I did the last few days, yesterday afternoon was also time for relaxing.
So I went to the garage and pulled out some of the stripes I had put on the Blazer Thought it worth playing about a bit.. AND FOR THE PHOTOSHOP KINGS.......... Knock yourself out Lowered, coloured, plain, GOLD WHEELS, change the wheels outright, steels, alloys. Go on.\ One of my colour schemes will be along this line. Sticking to the white as primary colour. Star Gasoline Racing ? So there you go team. Show us what you have.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#796 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
Bit more
QUOTE=sparkplug;5817207]again, just a rough illustration to give an idea. ![]()
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#797 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
.
OK......... So let’s get this put to bed first. Wheels are back on, its on the floor, and I am safe, tools put away. Ion Monday afternoon I had a Video call with @PaulY to show him the underside and chassis. Took some pics for you all to comment on, plan around or just stare at, like I did, in order to plan how to lower this thing significantly, while keeping it driveable. Sally had come over for dinner after work, and took a sneaky pic from the kitchen. ![]() Front Various views. You will note bits missing, bits undone or loose. I guess that will be part of the challenge. So there you go. .
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#798 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
.
Houston, we have a problem. Meet “ Burger “ she lives in a Vauxhall Viva estate. When discovered a year ago,the nobody knew how she got inside a closed car in an engineering companies yard. Turns out, she had found a large enough hole under the rear wheel arch to make her way inside, and create a home. Since then, she was de-wormed, de-flea’d and has two full meals a day, while keeping an eye on the engineering shop’s owner. Seems that ideally she needs a real home. Sweet as a sweet thing and loves a cuddle. Soooo tempting. While I was in the yard, I was offered this twin axle galvanised car trailer that only had one axle as someone managed to mangle the front axle. No space for it, but wish I did.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#799 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
With slowly returning to normal, and going out again, I got this delivery today.
Guess the honeymoon could not last forever In another postal related trick, Fil, who went to fetch the Rezin Rockit with his camper van, for the cost of diesel, was not impressed when I rounded up the cost and “overpaid” him. So he sent me an envelope with the receipts and a £2.00 scratch card. That made me laugh out loud, realising it was no use trying to challenge the man to a game of one upmanship ![]() Then I made a protesting Sally scratch..... No win though, which was also fine. Imagine a win though. In other news. I went to see mate Darren and he offered me Burger The sweetest stray cat that lives in a car in his yard, Sally and others said yes, I am still contemplating. Inside the shop, this is one of his side projects, alongside the real day job tasks happening. Meet Project Covid. V8 Beetle. Planned for a beach race called Race the Waves Out in the yard, he had this galvanised car transporter trailer, was twin axle, one got damaged, yours for £250.00 collected on Sheppey. Wish I had space and use for it. So next stop, inside a container, crawling through a caravan body....... To this. Gearbox side. Comes with a wiring loom, hopefully the ECU is somewhere too. Should be in there. And found one 5 point harness. May not be the right thing for the car and seats I have , but hopefully it works, and once I have a second one, which Bill in Scotland has a Black example of. Displayed on the Vauxhall Viva’s hood, where Burger lives. Meet Burger, not a Harley, and not yet adopted, but certainly has put the cat amongst my mental pigeons. So there you have it, engine and gearbox. Clearly needs a lot more........
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#800 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project
[quote author="@iainr" source="/post/2629522/thread" timestamp="1600502351"]It looks like you have successfully got through the first round of interviews to be Burgers new servant. Good luck with the second round.
Iain[/quote] LOL...! I am thankful. Darren, like me is a sucker for animals..... she already owns his asss. Sally says her name is Molly, not Burger. I don’t care what her name is, but rather if she will sit on my lap, cleaning herself. Seems she is a cleaner. ![]() ![]() Looks like a real shop cat. Seems like another Harley .
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
Bookmarks |
|
|