![]() |
|
![]() |
#1 |
Registered User
![]() Join Date: Jul 2012
Location: Ladysmith, WI
Posts: 641
|
Re: 1968
I agree. You shouldn't need both mounting brackets. Here's a picture of the setup on Mustard before I took it all apart. I thought I had some better pics of it, but apparently not.
__________________
Nick Old Mustard, 1972 Chevy C20, 350, TH350, 4.10 Dana 60 rear, owned since I was 16 in 1986 http://67-72chevytrucks.com/vboard/s...d.php?t=545356 Blue Bell, 1987 K20, 6.2L Diesel, TH400/NP208, 4.10 gears Ustahav 1976 K10, 350/350/203, Gov Loc, Yooper beater trail truck. |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Jul 2012
Location: Ladysmith, WI
Posts: 641
|
Re: 1968
Oops. Here's the pic.
__________________
Nick Old Mustard, 1972 Chevy C20, 350, TH350, 4.10 Dana 60 rear, owned since I was 16 in 1986 http://67-72chevytrucks.com/vboard/s...d.php?t=545356 Blue Bell, 1987 K20, 6.2L Diesel, TH400/NP208, 4.10 gears Ustahav 1976 K10, 350/350/203, Gov Loc, Yooper beater trail truck. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: 1968
gdavis;
In the lower LH position of the brake booster bracket there is supposed to be a special raised section where your steering column firewall bracket fits under it then you put a bolt through it to hold it securely in place. |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
|
Re: 1968
Today, I removed the second bracket and mounted it to the fire wall. I went to the welding shop today and they are making me a set of brackets. Whickis really not brackets. They are a wedge or a tri angle out of alumium. 1/2 inch thick by 3/4 wide and 4 1/4 inches tall. When I am done it will set level and against the fire wall. New booster 59.95, set of alumium angles 10.00. I only have a spacer for now. It gave me the distances to measure. The angles will be done in a day or two. Then I welded my rod out of the booster with the rodunder the dash. It fits great. I will post pictures of the end result maybe Wednesday or Thursday.
Last edited by gdavis; 04-23-2013 at 08:41 PM. |
![]() |
![]() |
![]() |
#5 |
Registered User
![]() Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
|
Re: 1968
In picture number four on this post is the brake pedal with two holes in it. Does the rod fit into the top hole or the bottom. I also ran my small lines to the p-valve. The small lines are made out of nickle, bronze and steel. Which makes bending a snap.
Since this truck did not come with a 350 what fuel pump do I use? I have a two line pumo and a three line pump. But I don't like the slip on lines. On both pumps. Do they make a pump that has threads for all lines? I think it would be better than the slip hose and do away with a future leaking problem. |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jun 2006
Location: Utah
Posts: 1,562
|
Re: 1968
Looking great!
|
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Jun 2011
Location: Elk city ok
Posts: 891
|
Re: 1968
Coming along nice. When I went to get a fuel pump for my blazer at o'reillys they didn't have the one with 3 lines. On their system the 3 line is listed for auto trans trucks and 2 line is listed for manual trans. I used the 2 line as that is what was on mine already. The 3rd port is a return line to the tank to relieve excess pressure. Dustin
Posted via Mobile Device |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: 1968
If you plan to run without emissions then the 2 line pump is what you need, as far as plumbing the return line I would use metal fuel line for the majority and the best quality 5/16" hose you can get for sections that need connections.
|
![]() |
![]() |
![]() |
#9 |
Registered User
![]() Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
|
Re: 1968
I have them both. A three line and a two line. Just wanted to know what would be better?
|
![]() |
![]() |
![]() |
#10 |
Registered User
![]() Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
|
Re: 1968
I'll go to the parts depot tomorrow. Or what we locals call advance auto. A real small place. if I need some parts changes are they will have to order them. But that is one of the draw backs of living in a small town.
|
![]() |
![]() |
![]() |
#11 |
Registered User
![]() Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
|
Re: 1968
Today, I worked on the dry fit of the steering colum. I am not going to use the one I have in the truck. I am not totally concerned with this one. I will be getting a tilt in the future. Going to get it running and then I'll see. I did clean and paint the colum. This was a person want get all dirty working on it.
Hey guys how do a person get the fire wall boot over the colum shifter????? I tried and riped it so now I have to get another one. There got to be something I am doing wrong. Like holding my mouth wrong or bitting my lower lip.?????????????????????????????????????? Here it is Tuesday and I am no furter alone than I was last week. I did figure out the brake booster though. Last edited by gdavis; 04-24-2013 at 09:08 PM. |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: 1968
gdavis;
It's time to suck it up and buy a tilt column from CPP, besides $350 isn't that much money and you will be a lot happier anyway, call and ask for Jeff Norton at CPP for a 10% discount, tell him you are a member of 67-72chevytrucks.com that will knock $35 off the cost of the column. To answer your question you will need to remove the splined steering shaft to get the new boot on. |
![]() |
![]() |
![]() |
#13 | |
Registered User
![]() Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
|
Re: 1968
Quote:
Last edited by gdavis; 04-29-2013 at 08:59 PM. |
|
![]() |
![]() |
![]() |
#14 |
Registered User
![]() Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
|
Re: 1968
Today, I sand blasted the new perches that Rick sent me. Thanks so much Rick. I primed and painted them black. So tomorrow I will mount them on the engine. I also mounted the new E-brake off of the 72 on the 68 cab. I like the foot brake style better. The only thing is I need to know where the E brake cable come thru the fire wall. Will I have to drill a hole for the E-brake cable and how about the gromit. What does it look like. Rick can you take a picture of yours and where it comes thru the fire wall and post in on my site.
|
![]() |
![]() |
![]() |
#15 |
Registered User
![]() Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
|
Re: 1968
more pictures
|
![]() |
![]() |
![]() |
#16 |
Registered User
![]() Join Date: Jul 2012
Location: Ladysmith, WI
Posts: 641
|
Re: 1968
Good job, George. Those look a lot nicer than the greasy blobs I put in the mail.
Here's the best pic of the drivers side of the firewall area I took before disassembling Mustard. I believe that's the parking brake cable coming through the firewall to the right of the electrical plug block. It drops down onto the inner fender and runs down to the frame rails under the brake booster. If you have your parking brake pedal assembly together inside the cab, it basically goes straight through the firewall from the connection point from the pedal assembly. Here's a pic of that, too.
__________________
Nick Old Mustard, 1972 Chevy C20, 350, TH350, 4.10 Dana 60 rear, owned since I was 16 in 1986 http://67-72chevytrucks.com/vboard/s...d.php?t=545356 Blue Bell, 1987 K20, 6.2L Diesel, TH400/NP208, 4.10 gears Ustahav 1976 K10, 350/350/203, Gov Loc, Yooper beater trail truck. |
![]() |
![]() |
![]() |
#17 | |
Registered User
![]() Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
|
Re: 1968
Quote:
![]() ![]() |
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: 1968
My firewall is clear I will try to get some pictures for you providing it doesn't rain all day.
Did you get both cable brackets with the assembly or are they missing? Last edited by Xeen; 04-26-2013 at 03:40 AM. |
![]() |
![]() |
![]() |
#19 |
Registered User
![]() Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
|
Re: 1968
I got the bracket that attached to the parking brake itself. Also the bracket that holds the cable to the parking brake. Is there any more that I don't know of. Also can I remove the bracket that the old e brake handle attached to? Under the colum. It seams to ride a litter low. I guess it always rode that low. But you never seen it with the e brake handle installed. Please sent me a picture of yours also. Maybe it is clearier. I see in his picture that he has a support brackety to the booster. Should I mount one? Do anyone have such a bracket arm that they are not going to use? If so I would love to have it.
|
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: 1968
The firewall has a rectangular shaped hole for the gromet which is already attached to the new cable you will have to buy so order the new cable then measure for the hole you will need to cut.
If you already have the cable but the gromet is missing then just order a new gromet. You can see the two cable brackets I am refering to in the picture. ![]() |
![]() |
![]() |
![]() |
#21 |
67cheby
![]() Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: 1968
nice clean work, that steering column boot is tough !
|
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: 1968
It's easy when you have the special service tools required to remove and instal the shift tube
![]() I don't think he intends to use that column though so it would be a waste of money to buy them. ![]() ![]() |
![]() |
![]() |
![]() |
#23 |
Registered User
![]() Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
|
Re: 1968
Today, I helped a friend work on his solar pannels for his swiming pool. So I did not get to work on my truck. But, I did enjoy talking to a fellow board member today. I learned a lot with that phone call. Thanks Bryan. I ordered the grommet, the brake pedal release handle, the pad for the parking brake, a pad for the foot brake. So this way they all will match. This truck is going to look diamite when I am finshed. If the good Lord is willing and the creek don't rise. The picture does show me a lot. I hope to have the brake pedal all nocked up tomorrow morning. The weather is getting real hot here 86today.
I think my parking brake return spring is broken or weak. It doesn't return to the up right position. I will have to work on that before I land. Last edited by gdavis; 04-26-2013 at 07:35 PM. |
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: 1968
The return spring is built into the front cable on the 69-72 (foot operated version), if you are trying to use the 67-68 cable (hand operated version) it wont work properly and you will need to buy the correct cable.
|
![]() |
![]() |
![]() |
#25 |
Registered User
![]() Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
|
Re: 1968
Yea I see what you are saying. So I will get the right cable from a friend that has several of these truck in his bone yard.
Last edited by gdavis; 04-29-2013 at 08:58 PM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|