1976 Square "Simple Green"

[Trucker79]

I got mine! It'll be a while before this one runs. But when she does will post!!!

[RodsGreen10]

Well still haven't heard anything back from FiTech. Last communication was Saturday. I emailed yesterday and never heard back. When I find out you all will find out.

[RodsGreen10]

Got this email From Jeremy today.

We had a guy with a truck that had a fuel line getting pinched between the body and bed – it would happen during acceleration – maybe check that out!

Otherwise, try out the calibration that I put in it. If it’s way off, first let it do some learning (no rapid movements of the throttle, and do cruising). Then make adjustments to the ACCEL FUEL stuff.

If you’re getting cold start problems (fires, dies, can’t fire again until key off) – I have a new fix that will be releasing in a day or so. It’s just a quick-fix to recover quickly from the brown-out that happens when the voltage drops when the starter hits and the power connection is not in a great spot. So, let me know, and I’ll walk you through the update (it’s easy).

[RodsGreen10]

Got this from Ken.

System is fine nothing wrong or malfunctioning, needed some acceleration tuning and transient tuning…
You should be old to go.

[RodsGreen10]

So at this point waiting for it to show up and put it on and see what happens. I know my fuel line isn't pinched anywhere. They sent a new o2 also. Also I have a new battery and it is direct wired to FiTech now so we will see.

[tjsblazer]

I am considering going led. What do you run now? What are you going to ?What do you like or don't like?

[RodsGreen10]

Originally Posted by tjsblazer

I am considering going led. What do you run now? What are you going to ?What do you like or don't like?

Getting the exact same ones just having the inside with some custom stuff done to them. I like everything about them.

[LostMy65]

These guys in another forum are talking about you.
http://www.forabodiesonly.com/mopar/...post1971102007

[RodsGreen10]

Originally Posted by LostMy65

These guys in another forum are talking about you.
http://www.forabodiesonly.com/mopar/...post1971102007

Lol good old swamp.

[swampbog]

Originally Posted by LostMy65

These guys in another forum are talking about you.
http://www.forabodiesonly.com/mopar/...post1971102007

Sshh, don't tell him

[RodsGreen10]

Originally Posted by swampbog

Sshh, don't tell him

Busted lol.

[RodsGreen10]

Great snow and sleet and crap the rest of the week and this weekend. Damn I just want to test the FiTech out lol.

[Crushkrew]

I got sidetracked with the J O B....just need to make one more battery cable and install 02 sensor....startup vid on Saturday as I'm out of town till then...

[ray1970]

Ray here.
Good news.
RodsGreen10 adder unit and mine don't have the same problem relating to the cold start issue.
This is good news that there is not some built in issue...

Going to look into getting some of those head lamp for my ride.....

Thanks for letting me stop by.......Good luck.

Ray.

[Chrispbrown36]

Holy crap...as it sat when you bought it was perfect! Don't get me wrong, it looks good like you set it up but man....that thing was sweet as it sat!

[RodsGreen10]

Originally Posted by Chrispbrown36

Holy crap...as it sat when you bought it was perfect! Don't get me wrong, it looks good like you set it up but man....that thing was sweet as it sat!

Lol. Thanks I guess. I put leds in so I could see better. When I decide to drive it to work @4am it is nice being able to see a deer a half mile away. Plus it trips ppl out seeing them at the shows. Everyone thinks they are Harley lights. You and my mom are the only ones who don't like them lol. It's just headlights. I have a hard time being happy with what I have. Drives my wife crazy!! I always think something could be better. Is that bad? No and yes!!

[RodsGreen10]

Well slim scooped them up on tha low low!! We helped each other out. That is what it's all about!!

[MySons68C20]

Well any new news Rod?

[RodsGreen10]

Originally Posted by MySons68C20

Well any new news Rod?

FiTech unit shows up tomorrow. But I won't get to drive it cause of snow and nasty roads. But I can at least see if it will start and idle.

[slimneverdies]

Originally Posted by rodsgreen10

well slim scooped them up on tha low low!! We helped each other out. That is what it's all about!!

👍🏼👍🏼

[RodsGreen10]

Originally Posted by slimneverdies

👍🏼👍🏼

Hit me up.

[LostMy65]

Got all my stuff today.
Won't be doing the install until next week.

[RodsGreen10]

Well either the HEI control Module has gon bad or my pickup coil is bad. Will be testing today. Preliminary tests show it all good but HEI mod or pickup coil. Always some BS. Damn Chinese knock off ****.lol. Hell its all made in China.

[funkatation]

I've had 3 of the msd modules go bad on me. Was this the one from crane?
Posted via Mobile Device

[RodsGreen10]

Originally Posted by funkatation

I've had 3 of the msd modules go bad on me. Was this the one from crane?
Posted via Mobile Device

Yep. Just like the MSD heat module. Tested module it is bad. Now moving onto test the pickup coil. I am done with MSD and maybe crane aka fast ****. I will either get a Davis Unified setup or Pertronix.