1965/73 Cheap Build Up - Page 32 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Palf70Step** · 09-17-2009, 10:49 PM

I believe the blue theme is a leftover scheme from an older version of the software that runs the board and has not had all the quirks worked out. There is a lot of changes in the software programming between this version and the older version that there blue theme was made with.

If that is not it, at least I sounded like I knew what I was talking about

joe231 · 09-17-2009, 10:56 PM

I thought I smelled something

Strodder · 09-17-2009, 11:00 PM

Quote:

Originally Posted by Palf70Step

I believe the blue theme is a leftover scheme from an older version of the software that runs the board and has not had all the quirks worked out. There is a lot of changes in the software programming between this version and the older version that there blue theme was made with.

If that is not it, at least I sounded like I knew what I was talking about

I change to Grey and that fixed it. Thanks

daverod · 09-29-2009, 06:28 PM

Though your thread was lacking some ass. Can you still buy those vette bezels? I was thinking about stealing your idea and putting a couple on my truck. Think it would work on a fleetside? Maybe two on the same side?

watahyahknow · 09-29-2009, 06:53 PM

those accessories look good on/from any side and in any vehicle
the surfboard should fit in the bed too

Strodder · 09-29-2009, 07:53 PM

Quote:

Originally Posted by daverod

Though your thread was lacking some ass. Can you still buy those vette bezels? I was thinking about stealing your idea and putting a couple on my truck. Think it would work on a fleetside? Maybe two on the same side?

Thanks for spicing things up. It's been boring around here lately. I don't see why it won't look good on a Fleetside. Go for it

Here's a new one for ya.

Strodder · 09-29-2009, 08:07 PM

I actually got to do a little work on the truck today. I started to port the heads on the 350 motor. I got the exhaust ports done on one head, and primered the bare metal on the right side of the truck.
When I do porting I just clean up the ports and get rid of any sharp edges or bumps. I try to make them flow freely without opening them up. I'll also port match them when I get the gaskets. I also try to make them all feel the same with my finger gauge. I've done a lot of Chevy, VW's and motorcycles the same way. And it works. You can't over do it though or you can make less power. No pictures because there's not much that will come out good in a photo. Tomorrow I will have the truck back on the lift. Then I will make more progress.

jgh64pkup · 09-29-2009, 09:03 PM

ive ported 3 sbc heads and a robin subaru 5hp head
im doing the same thing but i need some more cartidge rolls
i dont like doing it but is TIME CONSUMING!!
so how much of a difference does it make i havnt gotten mine on the road yet

Strodder · 09-29-2009, 09:54 PM

Quote:

Originally Posted by jgh64pkup

ive ported 3 sbc heads and a robin subaru 5hp head
im doing the same thing but i need some more cartidge rolls
i dont like doing it but is TIME CONSUMING!!
so how much of a difference does it make i havnt gotten mine on the road yet

Yes it's very time consuming. On my 56 Belair I had a 327, Edelbrock Performer intake, Quadrajet, 194 heads, shortie headers, and a 3:08 Posi. No performance cam, just ported. I turned 15.5 sec in a 1/4 mile. I think it was all because of the porting. I never did put a cam in it. It would for sure wake it up, and probably turn in the 14's I wanted to put a 3:70 gears in it also, but never did that either.

jgh64pkup · 09-29-2009, 10:39 PM

i am currently porting a set of 487s i have one pretty much done

MacAttack · 09-30-2009, 11:35 AM

Quote:

Originally Posted by daverod

Though your thread was lacking some ass.

Snaking my girlfriend's shot: Not Cool.

daverod · 09-30-2009, 11:38 AM

Quote:

Originally Posted by MacAttack

Snaking my girlfriend's shot: Not Cool.

She's mine now and she likes it.

MacAttack · 09-30-2009, 11:39 AM

Quote:

Originally Posted by daverod

She's mine now and she likes it.

She a local Huntington Pier girl and knows chit about Idaho taters.

4dranch · 09-30-2009, 12:28 PM

Sure she does Mac.....

MacAttack · 09-30-2009, 12:52 PM

You didn't!

daverod · 09-30-2009, 01:25 PM

Quote:

Originally Posted by MacAttack

She a local Huntington Pier girl and knows chit about Idaho taters.

She told me she loves taters.

Especially upside down ones.

MacAttack · 09-30-2009, 01:59 PM

Strodder · 09-30-2009, 02:32 PM

Dave you couldn't handle her.

watahyahknow · 09-30-2009, 02:42 PM

let the nightmares begin

daverod · 09-30-2009, 02:43 PM

Stop it!!! I was going to eat some lunch. Now I'm not really hungry.

MacAttack · 09-30-2009, 02:47 PM

There is such a thing as TMA (too much......)

4dranch · 09-30-2009, 03:07 PM

jgh64pkup · 09-30-2009, 03:12 PM

Strodder · 09-30-2009, 10:19 PM

I'm delivering the 62 Impala body only tomorrow morning so the body shop can do the out side body work & paint. I'm done with the floor & trunk panel replacements, and rust repair. Next I do the frame.

The good news is I finely got the truck on the lift. Now to get the body set down in the back some more. Then restore the frame. Stay tuned.

1964C10 · 10-01-2009, 12:37 AM

Nice work Dennis!!

09-17-2009, 10:49 PM	#776
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,082	Re: 1965/73 Cheap Build Up I believe the blue theme is a leftover scheme from an older version of the software that runs the board and has not had all the quirks worked out. There is a lot of changes in the software programming between this version and the older version that there blue theme was made with. If that is not it, at least I sounded like I knew what I was talking about __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

09-17-2009, 10:56 PM	#777
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1965/73 Cheap Build Up I thought I smelled something __________________ *CHEVY ONLY*

09-29-2009, 06:28 PM	#779
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: 1965/73 Cheap Build Up Though your thread was lacking some ass. Can you still buy those vette bezels? I was thinking about stealing your idea and putting a couple on my truck. Think it would work on a fleetside? Maybe two on the same side? Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 09-29-2009 at 06:39 PM.

09-29-2009, 06:53 PM	#780
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 1965/73 Cheap Build Up those accessories look good on/from any side and in any vehicle the surfboard should fit in the bed too __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts Last edited by watahyahknow; 09-29-2009 at 06:53 PM.

09-29-2009, 08:07 PM	#782
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 1965/73 Cheap Build Up I actually got to do a little work on the truck today. I started to port the heads on the 350 motor. I got the exhaust ports done on one head, and primered the bare metal on the right side of the truck. When I do porting I just clean up the ports and get rid of any sharp edges or bumps. I try to make them flow freely without opening them up. I'll also port match them when I get the gaskets. I also try to make them all feel the same with my finger gauge. I've done a lot of Chevy, VW's and motorcycles the same way. And it works. You can't over do it though or you can make less power. No pictures because there's not much that will come out good in a photo. Tomorrow I will have the truck back on the lift. Then I will make more progress. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

09-29-2009, 09:03 PM	#783
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: 1965/73 Cheap Build Up ive ported 3 sbc heads and a robin subaru 5hp head im doing the same thing but i need some more cartidge rolls i dont like doing it but is TIME CONSUMING!! so how much of a difference does it make i havnt gotten mine on the road yet __________________ Gage 1967 C10 Shortbed Stepside

09-29-2009, 10:39 PM	#785
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: 1965/73 Cheap Build Up i am currently porting a set of 487s i have one pretty much done __________________ Gage 1967 C10 Shortbed Stepside

09-30-2009, 12:28 PM	#789
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 1965/73 Cheap Build Up Sure she does Mac..... Attached Images __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

09-30-2009, 12:52 PM	#790
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: 1965/73 Cheap Build Up You didn't! __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

09-30-2009, 01:59 PM	#792
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: 1965/73 Cheap Build Up __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

09-30-2009, 02:32 PM	#793
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 1965/73 Cheap Build Up Dave you couldn't handle her. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

09-30-2009, 02:42 PM	#794
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 1965/73 Cheap Build Up let the nightmares begin __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

09-30-2009, 02:43 PM	#795
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: 1965/73 Cheap Build Up Stop it!!! I was going to eat some lunch. Now I'm not really hungry. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

09-30-2009, 02:47 PM	#796
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: 1965/73 Cheap Build Up There is such a thing as TMA (too much......) __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

09-30-2009, 03:07 PM	#797
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 1965/73 Cheap Build Up __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q



Register or Log In To remove these advertisements.

09-30-2009, 03:12 PM	#798
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: 1965/73 Cheap Build Up __________________ Gage 1967 C10 Shortbed Stepside

09-30-2009, 10:19 PM	#799
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 1965/73 Cheap Build Up I'm delivering the 62 Impala body only tomorrow morning so the body shop can do the out side body work & paint. I'm done with the floor & trunk panel replacements, and rust repair. Next I do the frame. The good news is I finely got the truck on the lift. Now to get the body set down in the back some more. Then restore the frame. Stay tuned. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

10-01-2009, 12:37 AM	#800
1964C10 Registered User Join Date: Mar 2008 Location: San Marcos, CA Posts: 578	Re: 1965/73 Cheap Build Up Nice work Dennis!! __________________ 1964 Fleetside LWB 1995 Yellow Mustang convertible 1996 Camaro Z28 My build thread Looking for help on completing the Disc Brake Upgrade Reference Thread If you didn't build it, you don't really own it

Register or Log In To remove these advertisements.