Glock's new project: "Fred" w/ 5.3L LS swap info - Page 32 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rongstad · 09-24-2009, 04:21 PM

Quote:

Originally Posted by JohnC

Some of the salvage places aren't as nice as they used to be. They really just want to be done with it as soon as it leaves their sight. They will do anything, and tell you anything to make you happy when you are dealing with them the first time. My cousin has had several confrontations with them because he is doing something different than what it's intended purpose is. They aren't in the business of that, and get quite rude.

X 2... I'm trying to get the VIN for my 6.0 to purchase the correct DBW pedal and keep getting the run arround...

Quote:

Originally Posted by glock35ipsc

Well, with some FANTASTIC help of the parts guy at the local Chevy dealer, I have some info......

wish they were as helpful around here....... good luck

**nlped** · 09-24-2009, 04:37 PM

That sux about the pedal issue! Had you known a week ago you could have already acquired the correct assembly and had Fred up and driving...at speed

. But at least you figured it out and it sounds like you are only a day away from near completion (don't forget the A/C...I'm gonna need you to figure that out before I start mine

)

glock35ipsc · 09-24-2009, 04:38 PM

Quote:

Originally Posted by rongstad

X 2... I'm trying to get the VIN for my 6.0 to purchase the correct DBW pedal and keep getting the run arround...

If you already have the PCM, see if you can find someone local that tunes them, they can pull the VIN from it. I think even since the stealerships can reflash them, they should be able to tell you also.

I got off the phone with Rock Auto a little while ago, they have already emailed me a pre-paid FedEx label to send the pedal back. They acknowledged that the part was boxed incorrectly, so they will credit my debit card the full price including the 2nd day FedEx shipping I paid. Rancho should take a clue from Rock Auto in customer service.....

The dealer ordered the pedal and harness for overnight shipping, so I should have that by lunch time tomorrow. So, if nothing else goes wrong (where the hell is some wood!), we'll be cruising this weekend!!

glock35ipsc · 09-24-2009, 04:40 PM

Quote:

Originally Posted by nlped

That sux about the pedal issue! Had you known a week ago you could have already acquired the correct assembly and had Fred up and driving...at speed

. But at least you figured it out and it sounds like you are only a day away from near completion (don't forget the A/C...I'm gonna need you to figure that out before I start mine

)

I've pretty much decided on the high-mount kit from Kwik Perf. It's just too tight in the stock location for my liking. Not saying it can't be done, it just doesn't set well with me.

glock35ipsc · 09-24-2009, 05:56 PM

Anyone need an 04-05 pedal that has already been converted to use the original truck pedal?

SBTork · 09-24-2009, 07:26 PM

Quote:

Originally Posted by rongstad

X 2... I'm trying to get the VIN for my 6.0 to purchase the correct DBW pedal and keep getting the run arround...

wish they were as helpful around here....... good luck

Im a GM parts guy, if you need some help just PM me. I can get part numbers and pricing for you. I may not be fast because I don't have internet access at work(yeah, I know). This also goes for anyone else, just let me know.

I hope you go crusing this weekend with the new powerplant, it's been a long wait for us internet watchers

Actually you work very fast, im just very impatient.

Even11 · 09-24-2009, 08:18 PM

I gotta tell you that you do some impressive and fast work!!

I am looking for a reasonable priced 6.0 for my 90 Blazer now!! Thanks for the inspiration!!

-Dane

glock35ipsc · 09-24-2009, 08:52 PM

Quote:

Originally Posted by Driveway Dreams

Well, you think Fred is gonna be ready for this weekend? I am still holding out hope.

Well, I guess I should change my answer from "nope, not a chance now" to "partly cloudy with a chance of meatballs."

I'll know tomorrow night either yes or no. After that, I'm out of business days to order parts to arrive in time for a Sunday cruise.

**nlped** · 09-24-2009, 10:10 PM

How much for that pedal assembly? It'll work with my upcoming swap perfectly

glock35ipsc · 09-24-2009, 10:22 PM

$25 shipped?

menace121978 · 09-24-2009, 11:54 PM

damn Bob... sorry to hear about the troubles. i could go down to rancho in the morning and punch ol' Paul in the face if that would make ya feel better!

glock35ipsc · 09-24-2009, 11:58 PM

Mmmmm, actually, it would!!

menace121978 · 09-25-2009, 12:03 AM

sending pm

Driveway Dreams · 09-25-2009, 12:13 AM

Bob, you should have called me. I may have been able to get you a little price break on that pedal from my parts department at work.

Glad it has the potential to come out this weekend. Hopefully it is as warm as it is supposed be this weekend.

**nlped** · 09-25-2009, 07:38 AM

PM sent...

glock35ipsc · 09-25-2009, 08:52 AM

Quote:

Originally Posted by Driveway Dreams

Bob, you should have called me. I may have been able to get you a little price break on that pedal from my parts department at work.

Glad it has the potential to come out this weekend. Hopefully it is as warm as it is supposed be this weekend.

Ya know, I didn't even think about it at the time. By the time I figured out what the problem was and what I really needed for a pedal, I had about 30 minutes to decided if I wanted to get them or not so they could get the order in on time to have them here today. Oh well, next time!

Ed, back at ya!

JohnC · 09-25-2009, 09:11 AM

Quote:

Originally Posted by menace121978

damn Bob... sorry to hear about the troubles. i could go down to rancho in the morning and punch ol' Paul in the face if that would make ya feel better!

Quote:

Originally Posted by glock35ipsc

Mmmmm, actually, it would!!

We need VIDEO!

glock35ipsc · 09-25-2009, 09:38 AM

Wow, when did I blow past the 5000 post mark???

JohnC · 09-25-2009, 09:40 AM

Uhmmmm 8 posts ago?

glock35ipsc · 09-25-2009, 09:44 AM

Smart a$$!

Actually, it was 9 posts ago!

joe231 · 09-25-2009, 09:45 AM

menace121978 · 09-25-2009, 10:59 AM

Bob did you get my pm?

Driveway Dreams · 09-25-2009, 10:59 AM

I noticed you were coming up on it. Way to go Bob! That is what you get for being helpfull and all that crap!

glock35ipsc · 09-25-2009, 11:05 AM

Quote:

Originally Posted by menace121978

Bob did you get my pm?

Haha, yeah I did. If you want to, go for it! I think it would be hilarious! But otherwise, I'm pretty much done with them. If for some strange reason I do get the parts from him, I'll probably just sell them. Actually, if he DOES have the right parts and hasn't shipped them yet, tell him you are there to get them for me!

You know as much of the details as he does, more actually! Tell him you are my Sacto family boss!

Quote:

Originally Posted by Driveway Dreams

I noticed you were coming up on it. Way to go Bob! That is what you get for being helpfull and all that crap!

Must be all that crap!

68 TT · 09-25-2009, 11:18 AM

Quote:

Originally Posted by glock35ipsc

I think you did get a good deal Ed!

Thanks Aaron!

Dennis, it will cost me about $250 to set up the 3.42 R&P I have into Fred's rear end, so for me that's a good price for a complete rear end that will also give me the extra width that I want. But I just found one in Aurora for $175 that I could probably get for $150, I'll probably know about that one Friday.

I can get truck rear ends for $85 complete at the pull it yourself yard with a 30 day warranty or pay $300 at the main yard and get a six month warranty.

They sell the gears and carrier as a set for $47. Only thing missing is the carrier bearing races and shims. For some reason they don't leave those on the assembly.

The ones with ultra low miles (like under 1000) go for a little more but most are just $47.

09-24-2009, 04:37 PM	#777
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Glock's new project: "Fred" That sux about the pedal issue! Had you known a week ago you could have already acquired the correct assembly and had Fred up and driving...at speed . But at least you figured it out and it sounds like you are only a day away from near completion (don't forget the A/C...I'm gonna need you to figure that out before I start mine ) __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

09-24-2009, 05:56 PM	#780
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's new project: "Fred" Anyone need an 04-05 pedal that has already been converted to use the original truck pedal? __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

09-24-2009, 08:18 PM	#782
Even11 Registered User Join Date: Sep 2009 Location: C/S, CO Posts: 6	Re: Glock's new project: "Fred" I gotta tell you that you do some impressive and fast work!! I am looking for a reasonable priced 6.0 for my 90 Blazer now!! Thanks for the inspiration!! -Dane

09-24-2009, 10:10 PM	#784
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Glock's new project: "Fred" How much for that pedal assembly? It'll work with my upcoming swap perfectly __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

09-24-2009, 10:22 PM	#785
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's new project: "Fred" $25 shipped? __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

09-24-2009, 11:54 PM	#786
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Glock's new project: "Fred" damn Bob... sorry to hear about the troubles. i could go down to rancho in the morning and punch ol' Paul in the face if that would make ya feel better! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

09-24-2009, 11:58 PM	#787
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's new project: "Fred" Mmmmm, actually, it would!! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

09-25-2009, 12:03 AM	#788
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Glock's new project: "Fred" sending pm __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

09-25-2009, 12:13 AM	#789
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Glock's new project: "Fred" Bob, you should have called me. I may have been able to get you a little price break on that pedal from my parts department at work. Glad it has the potential to come out this weekend. Hopefully it is as warm as it is supposed be this weekend. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

09-25-2009, 07:38 AM	#790
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Glock's new project: "Fred" PM sent... __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

09-25-2009, 09:38 AM	#793
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's new project: "Fred" Wow, when did I blow past the 5000 post mark??? __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

09-25-2009, 09:40 AM	#794
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Glock's new project: "Fred" Uhmmmm 8 posts ago?

09-25-2009, 09:44 AM	#795
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's new project: "Fred" Smart a$$! Actually, it was 9 posts ago! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

09-25-2009, 09:45 AM	#796
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Glock's new project: "Fred" __________________ *CHEVY ONLY*

09-25-2009, 10:59 AM	#797
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Glock's new project: "Fred" Bob did you get my pm? __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list



Register or Log In To remove these advertisements.

09-25-2009, 10:59 AM	#798
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Glock's new project: "Fred" I noticed you were coming up on it. Way to go Bob! That is what you get for being helpfull and all that crap! __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

Register or Log In To remove these advertisements.