Post Your Craigslist Finds

[Chevyland]

I’ll bet it has several hundred if not over a thousand in back fees
He states it right in the ad
Which of course only matters if you are going to register it in Ca.

[67C10Step]

Originally Posted by Chevyland

I’ll bet it has several hundred if not over a thousand in back fees
He states it right in the ad
Which of course only matters if you are going to register it in Ca.

That's what I was thinking. Some non-Cali person should rescue that truck.

I just got the clear title on my 67 that my wife purchased for me last year this month. The guy it was purchased from never had the title transferred to him when he had bought the truck 12 years before. I started to tell the story to the lady at the DMV and she held up her hand, said "Don't tell me more than I need to know, just sign the title." I paid my $12.75, waited 10 weeks and got a clear title in my name.

[HO455]

YIKES! $250. Not mine.

https://corvallis.craigslist.org/pts...128333767.html

[zicc1835]

Originally Posted by HO455

YIKES! $250. Not mine.

https://corvallis.craigslist.org/pts...128333767.html

I gotta get some of what he is smokin.......

[KevinK7]

...Not CL, but I thought to post.
Located in Albuquerque, NM
I do not know the seller, just stumbled upon the ads and it seems like the few truck parts he has are reasonably priced.


https://www.letgo.com/en-us/u/richar...9-a1e3e93f9d79

[mgkgmc]

OfferUp Sierra Grande longhorn Gmc https://offerup.co/AACqfMA4I6

[HO455]

69 C10 looks like a Maroon truck. $9500. Not mine.

https://portland.craigslist.org/mlt/...117758029.html

this is a 1969 chevy truck c10
divorce special must sale asap
NEED TO SALE
LOTS OF NEW PARTS
NEW painless wiring harness 90 % done
new motor
BRAN NEW trans
new seat
nice 22" wheels that will come with it
and more
chevy 350 dual quad tunnel ram
runs and sounds grate
need's brakes blead and shifter put in to drive

9500 obo

if you need more info just call
call 503-888-15-58

[HO455]

72 HEAVY HALF! $16000. Not mine I too old to climb in and out of it.

https://seattle.craigslist.org/oly/c...128231727.html

Selling my Chevrolet C-50

She is solid and runs great.
Could be a great advertising piece for a business or auto shop.
Nice good wrench engine. v8
Custom all metal bed with fender flairs and side steps. No fiberglass or filler.
It is a manual with a split shifter. Clutch is strong and shifts great.

Rear end has been rebuilt.
Drive shaft has been replaced.
Engine purrs and doesn’t leak.
Wipers work
Lights work
Doors close and lock
No radio
Windshield and all glass is good and sealed.
Tires have lots of life
Has a two inch tow hitch.
Clean title in hand.

Has been garaged while I have owned it.

Must see to really appreciate!

Thanks for looking. I will remove add once it’s has sold. No need to ask if it’s available.

$16k

[Greasey Harley]

$2900 Spokane, WA

https://spokane.craigslist.org/cto/d...125834709.html

[daves72C10D]

For Sale 71-72 4WD front hub caps- not mine

https://hickory.craigslist.org/wto/d...098913151.html

[jocko]

70 C20 Custom Camper ebay
When's the last time you saw a 70-only 563 custom two tone paint job? Very cool!

[factorystock]

Originally Posted by jocko

When's the last time you saw a 70-only 563 custom two tone paint job? Very cool!

Your right, not often! 562 would be the reverse combo. The more you study this era, the more you find out how unique each year can be. The spid does not mention they are metallic colors. Color in photos appears to be more turquoise than green?

[72Cheyenne454]

Another odd ball color combo....

$14,500

https://inlandempire.craigslist.org/...130098060.html

[jocko]

Originally Posted by factorystock

Your right, not often! 562 would be the reverse combo. The more you study this era, the more you find out how unique each year can be. The spid does not mention they are metallic colors. Color in photos appears to be more turquoise than green?

That's right, both metallics as you noted - the combo is 512 Dark Green Poly and 529 Medium Green Poly - both of which are 70-only colors - not what folks usually think of in Dark Green (i.e. Glenwood Green - 505) and Med Green (Meadow Green - 518). As for the dark green looking turquoise, it definitely does, and in some color chips, it's actually referred to as dark blue-green poly as well. Here's a pic of a solid 512 dark green poly 70:

[jocko]

Having never stumbled across one before... Today, I found TWO GMC Highlander big blocks...

72 GMC Super Custom, Custom Camper Highlander big block $2900 (egad, that seems like a good deal).

72 GMC Super Custom Highlander big block $16K

[Killer Bee]

Originally Posted by jocko

Having never stumbled across one before... Today, I found TWO GMC Highlander big blocks...

72 GMC Super Custom, Custom Camper Highlander big block $2900 (egad, that seems like a good deal).

lost me at "I know what I have"

[too much stuff]

Originally Posted by 72Cheyenne454

Another odd ball color combo....

$14,500

https://inlandempire.craigslist.org/...130098060.html

Neat truck, but I don't think THOSE bucket seats are correct for a 70.

[HO455]

This may save someone some labor. $6950. Not mine nor am I in any way associated with the seller(s)
I'm a Burban guy and I'm sure it would be 3 times as much for a Suburban cab.

https://seattle.craigslist.org/see/p...127647145.html

1967 to 1972 Chevrolet, OEM, fully refurbished, pickup truck cab assembly with the original doors and new hinges, the original cowl vent panel and glove box door This cab will fit 1967 through 1972 Chevrolet and GMC C/K 10/20 pickup trucks. This particular cab is from a 1972 Chevrolet C20,2wd, automatic, with AC and with a low Transmission hump. The doors are original 1972 doors with the extra screw how under the vent window.
This cab is an A/C cab with the large rear window opening: it does not have the headliner trim mounting holes: it does not have the cutout for the rear cab exterior light: it does have an uncut radio mount panel: it does not have the rear cab molding mounting studs. The doors never had speaker holes cut into them: the doors and cab corners have had the molding holes and mirror holes welded up.
This OEM cab, doors, cowl vent panel and glove box door were cleaned, media and sand blasted to bare metal and then primed with PPG DP90LF epoxy primer. All areas of rust have been replaced as needed, including the left and right outer rocker panels and the lower part of the right cab corner. There was no panel replacement required in the roof areas, the cowl areas, the upper and lower hinge pillars, the windshield and back glass areas, nor in the major floor areas. All replaced sheet metal panels were measured and replaced, as required, utilizing MIG welding by our certified auto body technicians.
POR 15 or SEM 39573 rust preventative coating was applied to areas prone to rust such as the inside of the floor supports and the inside of the rocker panels. All seam sealer was removed prior to the start of repairs. Body imperfections and/or damage were metal finished and then covered with a skim coat of lightweight body filler. The cab exterior and interior have been primed with PPG CRE321 high build epoxy primer-surfacer. All seams have been sealed with Fusor 019, and in the case of the roof rain gutter sealed with 3M 8329, a flowable, factory match seam sealer. The cab, doors and cowl vent panel need final blocking, sanding and preparation prior to refinishing.
We are an auto body repair facility with over 40 years of experience, and a custom builder of 1967 to 1972 GM pickups. Our refurbished cabs are all from the intermountain west and have limited rust out areas. Specifically we do not refurbish cabs with any major rust in the roof, windshield, cowl vent, firewall, heater box, hinge pillar or floor areas. Our refurbished cabs are repaired to the same high standard that we have for our own frame up restorations.
We can provide our refurbished cabs with or without A/C, with or without the rear cab molding mounting studs, with the factory roof configured for roof lights, with or without the rear outside cab light, with the small back window or with a cowl vent panel without an antenna hole.
Why fight major rusted out cabs? Start your restoration with a solid, OEM, properly repaired and prepared base. We can also refurbish a cab supplied by you. Some final adjustment may be required to accommodate your frame, front end parts and box parts. Sold with a Bill of Sale.
Many in process photos are available.

Call or come by Monday thru Friday

City East Auto Body
2512 N Woodruff Rd
Spokane Valley, WA 99206

[GJB]

Originally Posted by Killer Bee

lost me at "I know what I have"

Good thing I saved that for the last line of the ad then... lol

[BLAZERMAN]

Found this on the local CL

https://kansascity.craigslist.org/ct...130831438.html

[BLAZERMAN]

Found this on the local CL

https://kansascity.craigslist.org/ct...130831438.html

[Already Gone]

Originally Posted by jocko

Having never stumbled across one before... Today, I found TWO GMC Highlander big blocks...

72 GMC Super Custom, Custom Camper Highlander big block $2900 (egad, that seems like a good deal).

72 GMC Super Custom Highlander big block $16K

I think these are first two GMC Highlanders I've ever seen as I thought the Highlander wasn't available onthe GMC's. I do notice these two aren't Package Trucks so wonder if the packages were available on the GMC's.

[jocko]

70 drw w/Mitchell $5K

[zicc1835]

Originally Posted by BLAZERMAN

Found this on the local CL

https://kansascity.craigslist.org/ct...130831438.html

looks like a 55-56 Caddy too.....ill take it

[HO455]

This is turning into a highlander page. Nice blue one $9900. Not a BBC but lots of other great stuff. Not mine. Those clear seat covers bring back some memories though.

https://portland.craigslist.org/clc/...130974655.html

1972 chev c20 custom with highlander package...
Factory ac truck (no compressor)
Factory tach
Tilt
Am/fm radio
Plaid seat
350
Auto
Runs and drives great
No rust
No rust repair
1 older repaint factory color

Hard to find like this...
9900. No trades
Cash talks