KS Valentines SPECIAL 67-72 PARTS ALOT of them

[JBerno]

Randy, if you have a floor dimmer switch can you add that to my list? Will get squared away once you post the pic of the antenna and we get a total.

Thanks
Posted via Mobile Device

[teeitup]

Joe, here are pics, you get 2nd pic, the other member will let me know on this thread which one he wants. The one on the rights chrome is weathered some. The nuts on all them have some pitting. $31 shipped each

[JBerno]

Randy, the one that is on my Blazer now does not adjust in and out, not sure but it looks like these ones do? Was a one piece antenna an option then?
Posted via Mobile Device

[teeitup]

There were some single mast antennas on these trucks, sorry but I don't have any of those right now

[JBerno]

Randy, I will wait for a single mast. Keep me in mind if you run across one. What are the damages on the 2 bumper bolts and the dimmer switch from a previous post? I will get you a money order one I get a total.

Thanks again
Posted via Mobile Device

[sduckworth13]

Randy, Can you PM me your phone number. Thank you for the pictures Randy. The guy that needs the radiator support doesnt have internet access. He had left my house by the time I got back on to see the picture of the radiator support. I think he would be happy with that one though. His son wrecked his truck and he just trying to get his GMC back on the road. I'll PM you his number while I'm here.

[slow72pckup]

Do you still have the aluminum intakes, carb, tachs, also looking for a 250 six cylinder distributor, blue 67 ash tray, blue headliner and trim?
Posted via Mobile Device

[teeitup]

Joe, I will watch for you one

Scott, THANKS for the heads up

slow72, I have the aluminum intakes $30 each. Some stock carbs $20 each. The SUN tachs $15 each, all plus shipping. No 6 cyl stuff. I have a blue headliner but no good trim, $75 shipped.

Thanks Randy

[slow72pckup]

I will take both intakes and both tachs, also interested in 67 ash tray preferably blue, 67 door handles and lighter If you have them you can just pm me details so I can get your money order shipping would be to 23117 va
Posted via Mobile Device

[teeitup]

I've got the tachs boxed up ready to go to swap meet, they do not have the wiring with them. I may have a 67 ash tray. I have some 67 inner window and inner door handles but they are boxed up too, they would be driver quality. No 67 lighters right now. I will get pics of stuff once I find it all and get a quote. Thanks Randy

[slow72pckup]

Thanks!!
Posted via Mobile Device

[teeitup]

pics but no quote yet

[slow72pckup]

Really appreciate you taking the time out of your day for pics everything looks great and ash tray is exactly what I was l was looking for! I'm not in a big hurry so you can take your time on quote and stuff.
Posted via Mobile Device

[zac]

Randy:

Been kind of out of the loop lately. Did you ever get a chance to check out shipping on those suburban gas tank straps? I'd take whatever hardware or bolts they had associated with them too, if it's still around.

Thanks, Zac

[Last_Paladin]

How much for a set of window regulator tracks?

[IndyNova]

I havent checked all 33 pages, but heres what id like prices an shipping to 46123:

a deluxe dash bezel with guages (Not sure if thats the correct name of the part, but its the guage housing that has the 6 or 7 guages(

An automatic trans x member for a 70 shortbed

And if the bed is still available, maybe some more pics.

Thanks

[jervin]

Hello, here are a few things I need for my '67 c10 that I hope you have. I need in the worst way metal outer shell part of the motor mounts for a 292 6 cly (both sides), the vent window assembly (glass, metal post, etc) for the drivers side and a drivers side inner fender. Any help would be much appreciated. Thank you, John E.

[teeitup]

Zac, sorry I completely forgot abotu them, I will get a quote when I get everything unloaded from swapmeet this week

Last_paladin, sorry only have pass sides right now

IndyNova, sorry sold all that stuff this weekend at swapmeet

jervin, John E. sorry but I sold all that stuff too at swap meet this weekend

Everyone, I still have quite a bit of stuff but alot of this stuff in this thread was sold this weekend, I cleaned out a bunch so now I can try to find some more trucks to part out and have the room to put the parts again

Thanks Randy

[Pmarti69]

Checking for the prices with shipping to 77345:

TH400 kickdown wiring and switch
2 Black seat retractors and belts (Best ones) 72 GMC
Pair of 4 core Radiators holders (best ones)
Pair of metal door panels (minimal surface rust)

If someone has asked, I would like to get in line , pending prices See pictures, Thanks Paul

[BLAZERMAN]

Randy, I know your probably tapped out after the Swapmeet but keep your eye out for a nice set of wheel tubs for me.

[antman919]

im looking for an automatic steering column for my 67. whatcha got thats in good condition?

[leroyseip]

thanks for the wheels Randy i had them powder coated an orange metalic color . i plan on painting the burb this orange and an off white in future no problem on shifter ill find another.

[teeitup]

Pmarti69, Paul, I have the kickdown and wiring $20, set of four 4 core holders $25, no black belts, and I will have to go through my door panels. The parts are still packed in my trailer from the swap meet, I'm going to try to start unloading it tonight after work

Rob, way wore out, then I found a 01 Z71 in Des Moines yesterday morning on Craigs and drove up there and it was junk, didn't make me very happy. I will watch for you a set of tubs

antman919, I have some out of 68-72, no 67 ones

Leroy, WOW, that looks awesome

Thanks Randy

[Pmarti69]

Originally Posted by teeitup

Pmarti69, Paul, I have the kickdown and wiring $20, set of four 4 core holders $25, no black belts, and I will have to go through my door panels. The parts are still packed in my trailer from the swap meet, I'm going to try to start unloading it tonight after work


Thanks Randy

Randy, I will take the kickdown and wiring and pair of 4 core radiator hold downs. When you get a chance let me know on the door panels and price. I would like to pay for all at once, pending price of panels. Thanks Paul, PM me your info for payment.

[teeitup]

Paul, here is what I have