What did you do today not on your truck... - Page 33 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72c20customcamper · 04-01-2021, 04:19 PM

Replaced the clock spring on the 03 Tacoma . This what happens when someone does work that has no clue how it works. Had the rack replaced by someone in Buffalo when my step son had the truck 3 months later I get the truck back with the air bag light on no horn or cruise . Knew instantly that the so called mechanic spun the wheel to line it up with input shaft on the rack . So now the spring had tension and eventually broke making lock to lock turns . Stepson said it had just happened so the shop was like 3 months not our problem . So a couple of hours and 100 bucks it's all working again

1976gmc20 · 04-01-2021, 07:22 PM

Replaced the oil pressure sending unit on my Jeep.

I had an oil leak that was driving me crazy trying to find it. Finally the oil pressure starting getting lower but it was not low on oil, and I discovered that there was oil dripping out of the end of the sensor where the wire attaches, and then dripping down on the a/t cooler lines! Apparently it got bad enough that the sensor was leaking enough pressure that it read low.

$36 at O'Reilly's and about 30 minutes fiddling with it.

**Ol Blue K20** · 04-01-2021, 08:31 PM

I did blood tests and showed up to find my cancer test postponed until tomorrow. What an awesome day........lol

LT7A · 04-01-2021, 09:45 PM

Quote:

Originally Posted by Ol Blue K20

I did blood tests and showed up to find my cancer test postponed until tomorrow. What an awesome day........lol

That sucks, but good luck on it tomorrow.

**Getter-Done** · 04-01-2021, 10:29 PM

Quote:

Originally Posted by Ol Blue K20

I did blood tests and showed up to find my cancer test postponed until tomorrow. What an awesome day........lol

Praying that results are Good.

Keep us posted .

.

**Stocker** · 04-02-2021, 12:06 AM

Quote:

Originally Posted by Ol Blue K20

I did blood tests and showed up to find my cancer test postponed until tomorrow. What an awesome day........lol

All the best to you, Dale. Keepin' you in my thoughts.

57taskforce · 04-02-2021, 12:42 AM

Praying everything is good for you Dale.

72c20customcamper · 04-02-2021, 08:59 AM

Hoping it all works out well

**Ol Blue K20** · 04-02-2021, 09:38 AM

Thanks everyone, I appreciate the kind words.....

**DeadheadNM** · 04-02-2021, 03:40 PM

Fingers crossed Dale - thinking good thoughts.

mr.mud1 · 04-02-2021, 03:54 PM

yes sir,take care,we'll all hope for the best.

1slo64 · 04-02-2021, 09:10 PM

Installed a woodgrain steering wheel in the 66 mustang I'm working on. Much better than the stock one, think I'm going to have to get another for my bronco.

**71CHEVYSHORTBED402** · 04-04-2021, 11:10 PM

Quote:

Originally Posted by 1slo64

Installed a woodgrain steering wheel in the 66 mustang I'm working on. Much better than the stock one, think I'm going to have to get another for my bronco.

[

No kidding, that looks sharp and compliments the interior.

And nice piece of meat Taskforce. Now I'm hungry again.

**Dieselwrencher** · 04-03-2021, 07:28 AM

My thoughts and prayers going to you Dale!

on the truck side of things, I did use my Longhorn yesterday to drag my 71 K20 project back to the stalled project area.

**Steeveedee** · 04-03-2021, 10:55 AM

Well, it was last Friday, but I drove it to buy some wood. A guy is selling off his wood shop because he's getting too old for the work. I hope that never happens to me. Anyway. He has lots of wood, but it's mostly short sections of wood floor. He made many projects from it, but for my purposes I'd've had to plane the flutes off the back sides and it would be too much work. I did end up buying a piece of ribbon sapele. 4/4 by 3" wide by 4' long. Didn't need the truck for that.

72c20customcamper · 04-03-2021, 01:14 PM

Smokin

**Getter-Done** · 04-03-2021, 01:30 PM

Quote:

Originally Posted by 72c20customcamper

Smokin

Looks Good

Name: rockcook.jpg
Views: 235
Size: 53.1 KB

.

72c20customcamper · 04-03-2021, 02:37 PM

While it’s cooking fixed the exhaust on the Tacoma flange on the cat rotted away causing a slight leak and throwing a code. Company in Canada makes these .

**Stocker** · 04-03-2021, 03:49 PM

Yesterday I picked up a bunch of seed pods from a locust tree and got the swamp cooler ready for summer.
Today I took delivery of a pickup load of unsplit firewood, mostly dry cedar with a little doug fir. Now I have something else to do!

1976gmc20 · 04-03-2021, 04:58 PM

Uncoiled and hooked up the long garden hose in the yard, then hosed mud off the 4runner and the Silverado. They're not clean still but probably a lot lighter

I just don't get the mud bogging on purpose thing anymore

72c20customcamper · 04-03-2021, 09:05 PM

Finished up around 5

**Getter-Done** · 04-03-2021, 11:20 PM

Quote:

Originally Posted by 72c20customcamper

Finished up around 5

Nice

.

57taskforce · 04-04-2021, 01:05 PM

Quote:

Originally Posted by 72c20customcamper

Finished up around 5

Nice, I’ve got my homemade file cabinet running as we speak, alternating oak and apple. The brisket will hopefully be done this evening. 10-12 hours total at about 200-220.

72c20customcamper · 04-04-2021, 08:01 PM

Quote:

Originally Posted by 57taskforce

Nice, I’ve got my homemade file cabinet running as we speak, alternating oak and apple. The brisket will hopefully be done this evening. 10-12 hours total at about 200-220.

My smoker I built to it's on a trailer so I can move it around . I've been using higher temps lately 275° +/- seems to be working out well .

57taskforce · 04-04-2021, 10:44 PM

Quote:

Originally Posted by 72c20customcamper

My smoker I built to it's on a trailer so I can move it around . I've been using higher temps lately 275° +/- seems to be working out well .

Looks like yours does a great job! My brisket came out perfect... 11 hours and it fell apart but was still really moist... nice smoke ring and bark.

04-01-2021, 04:19 PM	#1
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,649	Re: What did you do today not on your truck... Replaced the clock spring on the 03 Tacoma . This what happens when someone does work that has no clue how it works. Had the rack replaced by someone in Buffalo when my step son had the truck 3 months later I get the truck back with the air bag light on no horn or cruise . Knew instantly that the so called mechanic spun the wheel to line it up with input shaft on the rack . So now the spring had tension and eventually broke making lock to lock turns . Stepson said it had just happened so the shop was like 3 months not our problem . So a couple of hours and 100 bucks it's all working again Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

04-01-2021, 07:22 PM	#2
1976gmc20 Registered User Join Date: May 2015 Location: Montana Posts: 3,696	Re: What did you do today not on your truck... Replaced the oil pressure sending unit on my Jeep. I had an oil leak that was driving me crazy trying to find it. Finally the oil pressure starting getting lower but it was not low on oil, and I discovered that there was oil dripping out of the end of the sensor where the wire attaches, and then dripping down on the a/t cooler lines! Apparently it got bad enough that the sensor was leaking enough pressure that it read low. $36 at O'Reilly's and about 30 minutes fiddling with it. __________________ Current/past Chevy/GMC trucks: 1958 Chevy C-60; 1965 GMC C-50; 1965 Chevy C-10; 1971 Chevy K-10; 1973 Chevy K-20; 1976 GMC C-20; 1977 Chevy C-10 Suburban; 1980 Chevy K-10; 1989 Chevy K1500; 1991 GMC V1500 Suburban; 2016 Chevy K2500 HD Other vehicles: 1988 Jeep XJ; 2011 Toyota 4Runner

04-01-2021, 08:31 PM	#3
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: What did you do today not on your truck... I did blood tests and showed up to find my cancer test postponed until tomorrow. What an awesome day........lol __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

04-02-2021, 12:42 AM	#7
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,454	Re: What did you do today not on your truck... Praying everything is good for you Dale. __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

04-02-2021, 08:59 AM	#8
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,649	Re: What did you do today not on your truck... Hoping it all works out well __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

04-02-2021, 09:38 AM	#9
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: What did you do today not on your truck... Thanks everyone, I appreciate the kind words..... __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

04-02-2021, 03:40 PM	#10
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,428	Re: What did you do today not on your truck... Fingers crossed Dale - thinking good thoughts. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-02-2021, 03:54 PM	#11
mr.mud1 Registered User Join Date: Dec 2020 Location: Joggins Nova Scotia Posts: 1,597	Re: What did you do today not on your truck... yes sir,take care,we'll all hope for the best.

04-02-2021, 09:10 PM	#12
1slo64 Registered User Join Date: Feb 2019 Location: Madison, AL Posts: 323	Re: What did you do today not on your truck... Installed a woodgrain steering wheel in the 66 mustang I'm working on. Much better than the stock one, think I'm going to have to get another for my bronco. __________________ 1964 GMC Fleetside SWB 1966 Mustang Coupe 2013 Tahoe LT

04-03-2021, 07:28 AM	#14
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: What did you do today not on your truck... My thoughts and prayers going to you Dale! on the truck side of things, I did use my Longhorn yesterday to drag my 71 K20 project back to the stalled project area. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-03-2021, 10:55 AM	#15
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,614	Re: What did you do today not on your truck... Well, it was last Friday, but I drove it to buy some wood. A guy is selling off his wood shop because he's getting too old for the work. I hope that never happens to me. Anyway. He has lots of wood, but it's mostly short sections of wood floor. He made many projects from it, but for my purposes I'd've had to plane the flutes off the back sides and it would be too much work. I did end up buying a piece of ribbon sapele. 4/4 by 3" wide by 4' long. Didn't need the truck for that. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

04-03-2021, 01:14 PM	#16
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,649	Re: What did you do today not on your truck... Smokin Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

04-03-2021, 02:37 PM	#18
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,649	Re: What did you do today not on your truck... While it’s cooking fixed the exhaust on the Tacoma flange on the cat rotted away causing a slight leak and throwing a code. Company in Canada makes these . Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

04-03-2021, 03:49 PM	#19
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,698	Re: What did you do today not on your truck... Yesterday I picked up a bunch of seed pods from a locust tree and got the swamp cooler ready for summer. Today I took delivery of a pickup load of unsplit firewood, mostly dry cedar with a little doug fir. Now I have something else to do! __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

04-03-2021, 04:58 PM	#20
1976gmc20 Registered User Join Date: May 2015 Location: Montana Posts: 3,696	Re: What did you do today not on your truck... Uncoiled and hooked up the long garden hose in the yard, then hosed mud off the 4runner and the Silverado. They're not clean still but probably a lot lighter I just don't get the mud bogging on purpose thing anymore __________________ Current/past Chevy/GMC trucks: 1958 Chevy C-60; 1965 GMC C-50; 1965 Chevy C-10; 1971 Chevy K-10; 1973 Chevy K-20; 1976 GMC C-20; 1977 Chevy C-10 Suburban; 1980 Chevy K-10; 1989 Chevy K1500; 1991 GMC V1500 Suburban; 2016 Chevy K2500 HD Other vehicles: 1988 Jeep XJ; 2011 Toyota 4Runner



Register or Log In To remove these advertisements.

04-03-2021, 09:05 PM	#21
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,649	Re: What did you do today not on your truck... Finished up around 5 Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

Register or Log In To remove these advertisements.