Columbus..the 1957 IH 4x4..

[richard2717]

Nice creative touches

[8man]

Genius!

[mongocanfly]

Thanks Robert and Richard

[mongocanfly]

Thanks Scott !!

[72 tigger]

Fine craftsmanship as always

[Ol Blue K20]

Great work on the fuse block and punch and dies. Very clever!

[mongocanfly]

thanks Kirk and Dale..!!!

[mongocanfly]

I guess any progress is good...sandblasted and painted the dimmer switch mount and headlight buckets and cleaned up all the hardware...the headlights were mismatched and one didnt work anyway ,so I'll get a couple new ones and reassemble..

[Ol Blue K20]

Parts on the COUCH!!! I won't show that to my girlfriend. LOL...

[mongocanfly]

haha Dale...you should see in front of the couch...about 15 boxes of IH truck parts..
joys of living alone...nobody can complain but me..

[mongocanfly]

Well after waiting and waiting on the weather to cooperate and give me some decent temps to paint ,I finally gave up...I decided to add heat to my shop....usually something we dont have to produce much of in the south is heat...but the other day I was working in the shop and it was 40deg inside...
So I bought me a modine 100k btu LP heater...this should make it tolerable...next step will be my indoors temp paint booth I've been working on...

[67ChevyRedneck]

Do you know if your shop is insulated?

I'm curious how warm/cool mine will be in winter/summer with just insulation. I know my attached garage is only insulated on the wall attached to the house and the ceiling (bonus room above) and it gets pretty cold in there.

[mongocanfly]

I have living quarters on one end of my shop..that end is house style insulation..When I built my shop I got tricked into using what was supposed to be insulation with a r13 value...I dont believe it is near what they sold me on..my shop is studded walls just like a house...the insulation used went on the outside of the studs, then the chipboard over that...that junk is only 3/8" thick with foil on outer surface...this summer I'm going back with full house style insulation

With the insulation I have it will barely stay 10-15 degrees above outside temps in winter
And extremely hot in summer
My buddies shop has full 3-1/2" insulation and its unreal at the temp difference between his and mine in summer and winter

I had the HVAC guys at work spec out what i needed based on it being house style insulation and 1750sqft with 12ft walls...they came up with 73,000-80,000btu...so I upped it to 100,000btu ...they said I should be fine even if I dont do the extra insulation...

[67ChevyRedneck]

Great info. I'm also fully insulating mine to help keep the sounds down for my neighbors too. Not just working noises, but I love music. I hope to put up some kind of surround sound system.

I just noticed the name on the heater "Hot Dawg"

[8man]

Good for you. A temperature tolerable shop is wonderful!

[mongocanfly]

ive spent a lot of time in the outdoors during winter..i can stand the cold pretty good.. but having a warm shop will be nice
ive been know to crank up some Lynyrd Skynyrd (old stuff) from time to time

[67C10Step]

mongo,
Good on you! I have been considering the same or something similar for my shop. First thing I want to do is complete the ceiling and add insulation up there. My neighbor did this and it was a HUGE difference.

As far as noise goes, my closest house is over 100 yards from my shop and as I told my wife, "When I listen to Thin Lizzy the neighbors do to."

[8man]

Amen to listening to old rock over the sounds in the shop. Skynard, Creedence, etc.

[mongocanfly]

My closest neighbor is over 300yrds away..thru the woods...but I often wonder when im working in the shop with the doors open at 1am if it bothers them...but theyve never said anything....but Ive never asked

Yeah , the full insulation will make a huge difference...but thatll have to wait for now

[68Timber]

Shome living, that's awesome. I showed them to my wife joking around and she actually liked them. How'd your father's surgery go? I thought of the clutch and wondered about it.

[mongocanfly]

Thanks for asking John...his surgery went great ..hes already off the pain pump and walking the halls at the hospital..they kept him a few extra days due to him being a free bleeder...but the good news is hes doing so good they say he wouldnt need pt...coming home this afternoon

[mongocanfly]

Step 1 to having shop heat is completed...finally got a day off work so i built a mount for the heater and got it hung...what a job that turned Into...now to hook up electrical,gas, and exhaust...then I should have a paint friendly temperature to paint in..
Or I could just hoist the truck up in the rafters and paint it...it was 40deg at ground level,,,but I felt like 80 up on the ladder....
Still have a couple angle braces to add...but it's up there now...

[8man]

Good news on your father. Good for you on the heat.

[68Timber]

About the heat in the rafters instead of ground level, I started to link Big A$$ fans, but holy crap they start at a few thousand dollars.

[mongocanfly]

Thanks Robert..dad was doing good but we had to take him to emergency room this morn..hes having a hard time breathing..still no word, they running tests on him...

I know John..fans ain't cheap...later on I may add a couple of 60"-72" ceiling fans ,just to keep the air moving...but that size fan starts out at around $700..and up..but thatl come much later...