How about some pics of bagged 60-66

[joe dirt]

front view

[rwade]

Scum1, anymore pictures in the daytime?

Thanks, Wade

[namloc]

The Snortin' Bull . 1960 GMC swb,accuair bagged .Some Porterbuilt parts in a later frt. crossmember and suspension. Hi kick up back halfed triangulated four link rear.

[frostie_122]

Closer to being on the road
Posted via Mobile Device

[Boomscatty]

Here are a couple shots of my 60 on RideTech E3.

[ol_skool_chevy]

Originally Posted by Boomscatty

Here are a couple shots of my 60 on RideTech E3.Attachment 1480271

Attachment 1480272

VERY NICE !!!!!!!!!!

[C/10 King]

Originally Posted by Boomscatty

Here are a couple shots of my 60 on RideTech E3.Attachment 1480271

Attachment 1480272

Sweet Sweet Sweet!!!!!

[forestb]

Where did you get the low profile white walls? Your truck looks amazing by the way.

Originally Posted by Boomscatty

Here are a couple shots of my 60 on RideTech E3.Attachment 1480271

Attachment 1480272

[Lolometalsmith]

First post bear with me please!

[chevy2tom]

My buddy in California Sent me that picture a couple weeks ago lol

[lowbuck63]

Here's my 63

[rwade]

Frostie_122, can you post some more pics and info on how you mounted your rack and pinion on your stock crossmember?

Thanks Wade

[frostie_122]

Originally Posted by rwade

Frostie_122, can you post some more pics and info on how you mounted your rack and pinion on your stock crossmember?

Thanks Wade

The crossmember has been pancaked. The rack has two tabs, we welded threaded mount points and just two bolts. Notched the frame on both sides due to the air ride.

[frostie_122]

Originally Posted by frostie_122

The crossmember has been pancaked. The rack has two tabs, we welded threaded mount points and just two bolts. Notched the frame on both sides due to the air ride.

Another

[60chevyjim]

im thinking about pancaking the crossmember on my 65
to get it lower with cut coil springs and no drop spindels.
do you think is it possible to still use the original steering box
if I put the c notches for the steering ?

thanks chevyjim

[frostie_122]

Originally Posted by 60chevyjim

im thinking about pancaking the crossmember on my 65
to get it lower with cut coil springs and no drop spindels.
do you think is it possible to still use the original steering box
if I put the c notches for the steering ?

thanks chevyjim

i believe it has been done

[rwade]

Awesome work Frostie! Thanks for the pictures. Please post somemore pics in this section as your project progresses.

Thanks, Wade

[Jraney]

Hey fellas nice trucks. Do I have to go with rack and pinion steering group when I slam my 64?
Posted via Mobile Device

[frostie_122]

Originally Posted by Jraney

Hey fellas nice trucks. Do I have to go with rack and pinion steering group when I slam my 64?
Posted via Mobile Device

Nope. You can do traditional steering. Just gonna have to modify some things to get correct geometry.

[Jraney]

Is that a difficult process
Posted via Mobile Device

[frostie_122]

Originally Posted by Jraney

Is that a difficult process
Posted via Mobile Device

Not terrible.

[Jraney]

Ok. Sounds good. Thanks.
Posted via Mobile Device

[forestb]

Can someone tell me if you have a stock front cross member, tubular control arms and 2 in drop spindles how low can you get your truck. The measurement I am looking for is from the center of the hub to the wheel well. Thank you.

[namloc]

Got the 60 GMC out and driving recently,Not done though great feeling it move's on it's own.

[Realnoisy]

Here's a couple of my 65'. Took me five years to build (a year of that was waiting on Thorbecke Brothers false promises on ordered parts. Buyer beware). Anyhow, we are finally cruising down the road. All the hard work has paid off.