Its Mine the World Famous 67 Dragtruck - Page 33 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

noonzor · 05-31-2010, 01:05 PM

no more rattle can flat black? aw man! haha what color are you thinking about?

djracer · 05-31-2010, 02:26 PM

The base color will be black.

djracer · 06-01-2010, 06:38 AM

Here's a few teaser pics of some weekend progress.

prepping the firewall to slick it

out with the old rear

Bed is ready for paint

Wheels for sale

jgh64pkup · 06-01-2010, 08:38 AM

how much for the wheels
i know theyre way out of my price range but just incase

noonzor · 06-01-2010, 11:04 AM

schweeet, lookin good man!

djracer · 06-01-2010, 06:23 PM

I'll take 800 for all four wheels but I need to see check the front lug pattern.

jgh64pkup · 06-01-2010, 08:02 PM

damn man thats what you would pay for one if they were new
i hope someone buys them
are the rears 15x10?

djracer · 06-01-2010, 08:09 PM

15x10 in the rear and 15 x 3.5 or 4 up front but I think they are either 5 on 4.5 or 5 on 4.75 in the front.

jgh64pkup · 06-01-2010, 08:12 PM

with or without tires?

djracer · 06-01-2010, 08:25 PM

I'd leave the rears but they are a couple years old.

jgh64pkup · 06-01-2010, 08:59 PM

i hope you have luck selling them

**Hart_Rod** · 06-01-2010, 10:47 PM

Quote:

Originally Posted by djracer

I'm gonna put a smaller street gear in it and put it under my son's truck.

R u sure you don't want to swap for a 12bolt with 3.73s and an new Aburn posi????

ripdog28 · 06-18-2010, 07:58 AM

Whats the deal with the new engine?

gene_ensor · 06-23-2010, 01:27 AM

Awsome truck! What is the axle width and back spacing for your old setup? Thanks.

*Dylan · 06-23-2010, 03:03 AM

Never noticed you were redoing the truck til now. Looks great! Can't wait to see it hit the tracks again!

djracer · 06-23-2010, 05:05 AM

Quote:

Originally Posted by ripdog28

Whats the deal with the new engine?

I have almost every piece just waiting on a friend to put it together.

djracer · 06-23-2010, 05:09 AM

Quote:

Originally Posted by gene_ensor

Awsome truck! What is the axle width and back spacing for your old setup? Thanks.

The old wheels are 15x10 with 5 inches of back spacing. I don't know the width of the the old rear but its about 2 to 3 inches narrower than stock. I am gonna be running a 16x33x10.5w tire with a 14 to 16 inch wide wheel.

djracer · 06-23-2010, 05:14 AM

Quote:

Originally Posted by *Dylan

Never noticed you were redoing the truck til now. Looks great! Can't wait to see it hit the tracks again!

I have been working on it since I blew the old motor up. It has been a slow process but I hope the wait will be worth it. I had a real low paying job for a couple years and that didn't help at all. I am redoing a ton of stuff and trying to get it painted also. It should be lighter, faster and better looking when all is done.

ripdog28 · 06-23-2010, 10:45 AM

What Cylinder heads you using? the same BB2X?

djracer · 06-23-2010, 05:06 PM

bb3 xtra's

team39763 · 06-23-2010, 05:12 PM

Sorry if I missed it, but what is that front suspension setup? How much was it? It looks pretty light.

djracer · 06-23-2010, 05:16 PM

Its a bolt on Fatman mustang II setup. They vary in price with options.

noonzor · 09-18-2010, 11:44 PM

anything new kevin?

djracer · 09-19-2010, 12:22 AM

I bought some take off tires (33x10.5wx16's)so I can see how much to narrow the rearend.

djracer · 09-19-2010, 10:42 PM

I'll post some wheel and tire pics.

05-31-2010, 01:05 PM	#801
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: Its Mine the World Famous 67 Dragtruck no more rattle can flat black? aw man! haha what color are you thinking about? __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

05-31-2010, 02:26 PM	#802
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck The base color will be black. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

06-01-2010, 06:38 AM	#803
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck Here's a few teaser pics of some weekend progress. prepping the firewall to slick it out with the old rear Bed is ready for paint Wheels for sale __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

06-01-2010, 08:38 AM	#804
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Its Mine the World Famous 67 Dragtruck how much for the wheels i know theyre way out of my price range but just incase __________________ Gage 1967 C10 Shortbed Stepside

06-01-2010, 11:04 AM	#805
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: Its Mine the World Famous 67 Dragtruck schweeet, lookin good man! __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

06-01-2010, 06:23 PM	#806
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck I'll take 800 for all four wheels but I need to see check the front lug pattern. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

06-01-2010, 08:02 PM	#807
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Its Mine the World Famous 67 Dragtruck damn man thats what you would pay for one if they were new i hope someone buys them are the rears 15x10? __________________ Gage 1967 C10 Shortbed Stepside

06-01-2010, 08:09 PM	#808
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck 15x10 in the rear and 15 x 3.5 or 4 up front but I think they are either 5 on 4.5 or 5 on 4.75 in the front. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

06-01-2010, 08:12 PM	#809
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Its Mine the World Famous 67 Dragtruck with or without tires? __________________ Gage 1967 C10 Shortbed Stepside

06-01-2010, 08:25 PM	#810
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck I'd leave the rears but they are a couple years old. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

06-01-2010, 08:59 PM	#811
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Its Mine the World Famous 67 Dragtruck i hope you have luck selling them __________________ Gage 1967 C10 Shortbed Stepside

06-18-2010, 07:58 AM	#813
ripdog28 Registered User Join Date: Apr 2008 Location: Imperial Beach, CA Posts: 1,040	Re: Its Mine the World Famous 67 Dragtruck Whats the deal with the new engine? __________________ 69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles.3.5/6in drop. My Build.

06-23-2010, 01:27 AM	#814
gene_ensor Registered User Join Date: Oct 2005 Location: Rapid City South Dakota Posts: 39	Re: Its Mine the World Famous 67 Dragtruck Awsome truck! What is the axle width and back spacing for your old setup? Thanks.

06-23-2010, 03:03 AM	#815
*Dylan Mean Buzzin' Half Dozen Join Date: Mar 2008 Location: Orlando, Florida Posts: 1,081	Re: Its Mine the World Famous 67 Dragtruck Never noticed you were redoing the truck til now. Looks great! Can't wait to see it hit the tracks again! __________________ "War is an ugly thing, but not the ugliest of things. The decayed and degraded state of moral and patriotic feeling which thinks that nothing is worth war is much worse. The person who has nothing for which he is willing to fight, nothing which is more important than his own personal safety, is a miserable creature and has no chance of being free unless made and kept so by the exertions of better men than himself." MY TRUCK (Now for sale) 1967 C10 SWB *Dylan* IIMY?

06-23-2010, 10:45 AM	#819
ripdog28 Registered User Join Date: Apr 2008 Location: Imperial Beach, CA Posts: 1,040	Re: Its Mine the World Famous 67 Dragtruck What Cylinder heads you using? the same BB2X? __________________ 69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles.3.5/6in drop. My Build.



Register or Log In To remove these advertisements.

06-23-2010, 05:06 PM	#820
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck bb3 xtra's __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

06-23-2010, 05:12 PM	#821
team39763 Registered User Join Date: Feb 2007 Location: Texas Posts: 469	Re: Its Mine the World Famous 67 Dragtruck Sorry if I missed it, but what is that front suspension setup? How much was it? It looks pretty light. __________________ 1982 Silverado - SBE, cleaned up GM heads, small cam, TH350, 850 Demon, 4.56 gears, and caltracs. Best time so far 11.8@XXXMPH

06-23-2010, 05:16 PM	#822
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck Its a bolt on Fatman mustang II setup. They vary in price with options. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-18-2010, 11:44 PM	#823
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: Its Mine the World Famous 67 Dragtruck anything new kevin? __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

09-19-2010, 12:22 AM	#824
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck I bought some take off tires (33x10.5wx16's)so I can see how much to narrow the rearend. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-19-2010, 10:42 PM	#825
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck I'll post some wheel and tire pics. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Register or Log In To remove these advertisements.