What did you do today not on your truck... - Page 33 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Stocker** · 03-11-2021, 12:26 AM

Quote:

Originally Posted by mr.mud1

hi,i built a new shop,64x32 finishing it up late last fall.my wife and i put 2100 feet of pex pipe in the floor before they poured the concrete and i built an in floor heat panel with an electric boiler.i am officially spoiled rotten.beautiful heat,always warm and very nice to work in.i'm very happy with it.

Very nice! I've always thought of owning a home with a heated floor like that.

62c30 · 03-12-2021, 12:00 AM

Quote:

Originally Posted by Rickysnickers

Curious, how and what are you guys using to heat your shops?

Mini split, haven't used the ac yet but for a heat pump with no heat strips it did a damn good job keeping the garage at 62 degrees for the 2 weeks we had below freezing.

57taskforce · 03-12-2021, 04:19 PM

Got the 3306 from posts 676 and 679, put back together and installed into a power unit skid and ran over the last few days. I ran it on propane for about 2 hours to make sure that the oil psi would hold once the oil was good and hot. 40lbs at idle and 75-80 at 1600 rpms. All ready to go back to the field and run for 8-10 years non stop.

Richard2112 · 03-12-2021, 04:30 PM

Gave my motor a paint job...

**Ol Blue K20** · 03-12-2021, 04:36 PM

Excuse my ignorance but why did you paint the cylinders, lifter valley and pistons?

LT7A · 03-12-2021, 04:37 PM

Quote:

Originally Posted by Richard2112

Gave my motor a paint job...

Um... Well, very thorough.

Richard2112 · 03-12-2021, 04:38 PM

Those pistons look good though, don't they..

Got that picture from another forum. Thought it was sharable

Richard2112 · 03-12-2021, 04:42 PM

Doin' brakes next...

57taskforce · 03-12-2021, 04:44 PM

Quote:

Originally Posted by Richard2112

Those pistons look good though, don't they..

Got that picture from another forum. Thought it was sharable

It’s the latest greatest anti friction coating, funny it comes in Chevy orange!

Man kinds’ ability to be stupid never ceases to amaze me. I think I’ll pass on the brake job

67C10Step · 03-12-2021, 05:29 PM

Picked up a new toy.

**Boog** · 03-12-2021, 08:22 PM

Real nice. 40?

1976gmc20 · 03-12-2021, 08:29 PM

Quote:

Originally Posted by 67C10Step

Picked up a new toy.

You actually found a gun store with something in stock ????

1slo64 · 03-12-2021, 09:59 PM

Quote:

Originally Posted by 1976gmc20

You actually found a gun store with something in stock ????

Didn't realize places were still having issues. All gun stores here have good inventory and ammo.

67C10Step · 03-12-2021, 11:04 PM

.45 auto and this store is only about 5 minutes from my house. Little thin on guns and almost no Ammo. I don’t really need Ammo though. I stockpiled that years ago when I got it on the cheap.

Bigger store in north Little Rock had the same gun but was higher and I prefer doing business local when I can anyway.

4u2nv · 03-13-2021, 06:46 AM

Quote:

Originally Posted by Richard2112

Gave my motor a paint job...

He has a idea like I did

**Steeveedee** · 03-13-2021, 10:43 AM

^ That's pretty cool!

1976gmc20 · 03-13-2021, 11:42 AM

Quote:

Originally Posted by 67C10Step

.45 auto and this store is only about 5 minutes from my house. Little thin on guns and almost no Ammo. I don’t really need Ammo though. I stockpiled that years ago when I got it on the cheap.

Bigger store in north Little Rock had the same gun but was higher and I prefer doing business local when I can anyway.

Last time I was in Big R about a month ago all they had was a few revolvers and a bunch of shotguns, and no ammo except for shotguns.

I don't really need any more guns but you never have enough ammo. I'm not doing any recreational shooting anymore.

**davischevy** · 03-13-2021, 11:54 AM

Quote:

Originally Posted by 67C10Step

Bigger store in north Little Rock had the same gun but was higher and I prefer doing business local when I can anyway.

Ft. Thompson?

67C10Step · 03-13-2021, 06:59 PM

Quote:

Originally Posted by davischevy

Ft. Thompson?

Yep, you got it. I was surprised my local store was a bit less since it’s about 1/4 the size of Ft. Thompson’s. They are usually pretty good for price but their staff is hit and miss for me. Some put me off with their attitude. I’m not fielding any new calibers but just getting what I want while I can.

**LockDoc** · 03-13-2021, 07:58 PM

-
I went to a gun show today. I took $1000 with me but couldn't find anything that would buy....

.... Prices were through the roof. Most vendors were $60 - $65 for a box of 50 .380's.

Bought a good used holster ($10) and 1 new Ruger brand .380 clip ($25).

LockDoc

**Ol Blue K20** · 03-13-2021, 08:05 PM

Quote:

Originally Posted by LockDoc

-
I went to a gun show today. I took $1000 with me but couldn't find anything that would buy....

.... Prices were through the roof. Most vendors were $60 - $65 for a box of 50 .380's.

Bought a good used holster ($10) and 1 new Ruger brand .380 clip ($25).

LockDoc

Yep, the world is going to H&!!

**Steeveedee** · 03-13-2021, 08:29 PM

CostCo in the morning. Then worked on cutting out part of a new wood carving I'm starting. Then onto doing a little clean-up and detailing on my '05 Corolla that I'm going to sell. Great little car, but the son who has been driving it bought a new '21 Canyon, so it's got to go. Too many vehicles. It was my daily driver for 10 years, and then I retired. Everything works, but the paint (Mica green) is toast. That color is famous for it- I've never seen one more than 5 or so years old that it isn't going bad. Should have bought the white one.

**Ol Blue K20** · 03-13-2021, 08:42 PM

Quote:

Originally Posted by Steeveedee

CostCo in the morning. Then worked on cutting out part of a new wood carving I'm starting. Then onto doing a little clean-up and detailing on my '05 Corolla that I'm going to sell. Great little car, but the son who has been driving it bought a new '21 Canyon, so it's got to go. Too many vehicles. It was my daily driver for 10 years, and then I retired. Everything works, but the paint (Mica green) is toast. That color is famous for it- I've never seen one more than 5 or so years old that it isn't going bad. Should have bought the white one.

Maaco can make it look good on the cheap. It won't be show quality but won't be ugly.

**Steeveedee** · 03-13-2021, 10:55 PM

Quote:

Originally Posted by Ol Blue K20

Maaco can make it look good on the cheap. It won't be show quality but won't be ugly.

Eh, I'm not going to ask for a lot of money, so the paint won't be a bargaining chip. I have enough white left over from painting the front bumper on my Astrovan and the roof of my truck that I could probably sand it down and paint it white, but I'm not that ambitious. I do want to save the white to eventually paint below the lower belt molding back to the original white. Needs a little body work down there- my FiL put a crease in the right rear, behind the wheel well.

Andy4639 · 03-13-2021, 10:56 PM

I fixed this chair for our neighbor here @ the beach. Rhett & Hadley had a blast riding it. It works good now that I got the batteries charged up. The charger wasn't working. I used my 12 volt charger and got them chargered. They need a new charger. The light was coming on but not doing anything.

https://www.youtube.com/watch?v=LT8DysrFV6w

You Tube

03-12-2021, 04:19 PM	#803
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,450	Re: What did you do today not on your truck... Got the 3306 from posts 676 and 679, put back together and installed into a power unit skid and ran over the last few days. I ran it on propane for about 2 hours to make sure that the oil psi would hold once the oil was good and hot. 40lbs at idle and 75-80 at 1600 rpms. All ready to go back to the field and run for 8-10 years non stop. Attached Images __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s Last edited by 57taskforce; 03-12-2021 at 05:24 PM.

03-12-2021, 04:30 PM	#804
Richard2112 Registered User Join Date: Jul 2014 Location: South East Ohio Posts: 644	Re: What did you do today not on your truck... Gave my motor a paint job... Attached Images

03-12-2021, 04:36 PM	#805
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: What did you do today not on your truck... Excuse my ignorance but why did you paint the cylinders, lifter valley and pistons? __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

03-12-2021, 04:38 PM	#807
Richard2112 Registered User Join Date: Jul 2014 Location: South East Ohio Posts: 644	Re: What did you do today not on your truck... Those pistons look good though, don't they.. Got that picture from another forum. Thought it was sharable

03-12-2021, 04:42 PM	#808
Richard2112 Registered User Join Date: Jul 2014 Location: South East Ohio Posts: 644	Re: What did you do today not on your truck... Doin' brakes next... Attached Images

03-12-2021, 05:29 PM	#810
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,471	Re: What did you do today not on your truck... Picked up a new toy. Attached Images __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra

03-12-2021, 08:22 PM	#811
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,457	Re: What did you do today not on your truck... Real nice. 40? __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

03-12-2021, 11:04 PM	#814
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,471	Re: What did you do today not on your truck... .45 auto and this store is only about 5 minutes from my house. Little thin on guns and almost no Ammo. I don’t really need Ammo though. I stockpiled that years ago when I got it on the cheap. Bigger store in north Little Rock had the same gun but was higher and I prefer doing business local when I can anyway. __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra

03-13-2021, 10:43 AM	#816
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,608	Re: What did you do today not on your truck... ^ That's pretty cool! __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

03-13-2021, 07:58 PM	#820
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,649	Re: What did you do today not on your truck... - I went to a gun show today. I took $1000 with me but couldn't find anything that would buy........ Prices were through the roof. Most vendors were $60 - $65 for a box of 50 .380's. Bought a good used holster ($10) and 1 new Ruger brand .380 clip ($25). LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

03-13-2021, 08:29 PM	#822
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,608	Re: What did you do today not on your truck... CostCo in the morning. Then worked on cutting out part of a new wood carving I'm starting. Then onto doing a little clean-up and detailing on my '05 Corolla that I'm going to sell. Great little car, but the son who has been driving it bought a new '21 Canyon, so it's got to go. Too many vehicles. It was my daily driver for 10 years, and then I retired. Everything works, but the paint (Mica green) is toast. That color is famous for it- I've never seen one more than 5 or so years old that it isn't going bad. Should have bought the white one. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.