The Ultimate Craigslist find thread - Page 33 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Maytag906 · 10-17-2020, 05:23 PM

on Facebook

https://www.facebook.com/marketplace...64375297457641

C10 - C90 Bill · 10-17-2020, 09:28 PM

Nice truck, but the GVW does not make any sense. A single Axle Chevy should not have any more than 35,000 at the most. Unless it used to be a Tandem Axle truck.

Dannny B · 10-17-2020, 10:30 PM

"478 V8 high torque gasoline engine"
Nope, the 478 was a V-6
https://www.macsmotorcitygarage.com/...cubic-inch-v8/

C10 - C90 Bill · 10-18-2020, 01:05 AM

Quote:

Originally Posted by Dannny B

https://www.macsmotorcitygarage.com/...cubic-inch-v8/

Good write-up on the 637 V-8. As some may remember, I had a 637 Gas in the '71 GMC 9500 I used to drive. An interesting fact is that it was coupled with a 10-Speed Road Ranger Trans. Since the first day we received that truck in April of '72, up to today, I still have never seen, even in pictures or even heard of another with that combination.

I liked it, although I would had much preferred a 6-71 or even a 6V-53, but with it's weak torque, it required a lot of shifting. If it saw a hill coming, I was downshifting, lol.

jumpsoffrock · 10-20-2020, 02:02 AM

Quote:

Originally Posted by C10 - C90 Bill

Good write-up on the 637 V-8. As some may remember, I had a 637 Gas in the '71 GMC 9500 I used to drive. An interesting fact is that it was coupled with a 10-Speed Road Ranger Trans. Since the first day we received that truck in April of '72, up to today, I still have never seen, even in pictures or even heard of another with that combination.

I liked it, although I would had much preferred a 6-71 or even a 6V-53, but with it's weak torque, it required a lot of shifting. If it saw a hill coming, I was downshifting, lol.

Article says the 702 twin-six could run up to 15,000 hours on minimal maintenance.

C10 - C90 Bill · 10-20-2020, 09:32 AM

Quote:

Originally Posted by jumpsoffrock

Article says the 702 twin-six could run up to 15,000 hours on minimal maintenance.

Strange as it is basically two 351's.

In my opinion all the V-6's were pretty impressive.

Rubbertiredtramp · 10-22-2020, 08:44 AM

Quote:

Originally Posted by Dannny B

What's even rarer is; somebody who knows how to shift a 4+4 transmissions

Oh I don’t know about that, I think their are a few of us old geezers around yet.

**CarolinaHD** · 10-22-2020, 02:37 PM

On facebook marketplace but found a nice set of 6 lug Original GM Budd 22.5” tubeless rims outside of Lexington Kentucky. He was going to give them to me for free if i swapped my old wheels but i have the 5/10 lug pattern. The whole chassis is for sale as well.

His name is Dustin, 606-524-2894

https://www.facebook.com/marketplace...67649954082567

**VictoriaHardware** · 10-23-2020, 06:14 PM

Quote:

Originally Posted by Maytag906

on Facebook

https://www.facebook.com/marketplace...64375297457641

Check out that VIN tag- printed backwards plus attached with screws?
Complete paint job inside & out on a 12k mile truck that was always stored inside?

factorystock · 10-24-2020, 01:20 PM

Quote:

Originally Posted by VictoriaHardware

Check out that VIN tag- printed backwards plus attached with screws?

Not the way GM did it. This truck has been re purposed.

**too much stuff** · 11-15-2020, 10:46 AM

Nice. Hope someone can post pics from the ad. Wish the pics were a little better.
https://eauclaire.craigslist.org/hvo...217013246.html

Killer Bee · 11-15-2020, 12:48 PM

Quote:

Originally Posted by too much stuff

Nice. Hope someone can post pics from the ad. Wish the pics were a little better.
https://eauclaire.craigslist.org/hvo...217013246.html

Quote:

1972 chevy C65, 427 chevy gas motor, 5x4 transmission, pindle hitch, completely restored, call Dave at 715-829-8924 ,this truck is in like new condition, air conditioning, truck is in show condition.

C10 - C90 Bill · 11-15-2020, 06:42 PM

A real beauty.

I would take that over a brand new truck any day.

1972K20 · 11-16-2020, 12:35 AM

I've never seen that series truck with factory AC.

Maytag906 · 12-05-2020, 05:17 PM

1975 C 90 on FB Cummins with a 13 speed.

https://www.facebook.com/marketplace...code=undefined

**Pvmt-Pndr** · 12-06-2020, 07:17 AM

That didn't take long. It says it's no longer available

factorystock · 12-06-2020, 11:28 AM

Quote:

Originally Posted by too much stuff

Nice. Hope someone can post pics from the ad. Wish the pics were a little better.
https://eauclaire.craigslist.org/hvo...217013246.html

Wow! Show vehicle for sure! Great color combo!

**MusicMan70** · 12-13-2020, 02:35 PM

Fire Truck - Brush Rig - Diesel, 89k miles - $9,500 (Camas)

https://portland.craigslist.org/clk/...237092997.html

I like the look of this one.

GM72K10 · 12-20-2020, 06:56 AM

Front view of this C60. Says its still for sale. Factory air to boot.

**HO455** · 01-01-2021, 10:35 AM

HAPPY NEW YEAR everyone. Starting the new year off with this little GMC gem! $8900. Not mine but....

https://portland.craigslist.org/mlt/...252624630.html

I have my lovely dam truck for sale The reason is moving out for my business This truck work good Low mileage 11500 it’s the building And transmission 25000 miles in it Give me a call For more information my phone number is show contact info
Thank you for your time

**gigamanx** · 02-12-2021, 04:31 PM

Thought you all might like this Facebook marketplace post for a 59 International near me with a F350 chassis.
1959 International Harvester R190. F-350 chassis which has been completely refinished and frame coated. Inside and out, this truck is very clean and free of rot or rust minus the patina finish. All doors and windows have tight seals, the windows operate properly, windshield wipers work properly, The cab has been clear coated with professional automotive clear. Peterbilt visor, custom made mirror brackets, All brake and steering components are brand new. Power steering, 4 way air ride, custom heavy duty rear 4 link, train horns. 2 brand new Kenworth 50gal fuel tanks with transfer switch in the cab. New P pumped Cummins 4bt with valves, valve springs, Injectors and head studs. Intercooled. Freshly built NV4500 with brand new South Bend Clutch, flywheel, and hydro kit.

$30,000

https://www.facebook.com/marketplace...rral_code=null

Pick121 · 02-13-2021, 04:19 PM

Found this today, CA San Francisco Bay Area:
They look rough maybe not an un-damaged panel in the lot...and doubt willing to part out but who knows! PS NOT mine.
https://sfbay.craigslist.org/sby/cto...275257960.html
From ad: “all these trucks have been sitting for many years , all will need work to run and drive .
1981 c30 service bed 292 l6 4spd pb $1000
1981 c30 mech's bed ,pb 292 l6 $1000
1986 c30 350 4spd service bed ps pb $1500
1979 c20 pickup stepside 250 l6 4spd missing passenger fender and doors are messed up $700
1977 c30 no bed 350 4spd ps pb twin tanks $1000
1974 c50 no bed 250l6 4spd pb $1500
1965 gmc 4000 v6 4spd 2spd r/e 5-6 yard dump truck $1000
1964 gmc 4000 v6 4spd 2spd r/e $1500
these trucks have been sitting for years , most everything ran when parked.”

NoStopN · 02-14-2021, 11:10 AM

Quote:

Originally Posted by Pick121

1964 gmc 4000 v6 4spd 2spd r/e $1500
these trucks have been sitting for years , most everything ran when parked.”

Man, I would love to get my hands on that. I have no real need or plan for it, but it looks in good condition. Or as good of condition as one photo can show.

sweetk30 · 02-25-2021, 11:37 PM

https://www.facebook.com/marketplace...ok_story_share

**HO455** · 03-06-2021, 02:56 PM

A gem from the PNW. A 48 for $20000. Not mine!

https://portland.craigslist.org/yam/...281443219.html

1948 GMC CABOVER==ORIGINAL TRUCK==270 GMC 6-CYLINDER, REBUILT==TWO STICK 5 AND 4 TRANSMISSIONS==NEW BRAKES==AS NEW TIRES==NEW WIRING TOUGHOUT==12 VOLT==2-SPEED HAND CRANK EXTEND-A BOOM HOIST-ORIGINAL EQUIPMENT==NO RUST==NICE BED

10-17-2020, 05:23 PM	#801
Maytag906 Registered User Join Date: Dec 2019 Location: South Bend Posts: 56	68 Chevrolet Spartan on Facebook https://www.facebook.com/marketplace...64375297457641 Attached Images

10-17-2020, 09:28 PM	#802
C10 - C90 Bill Registered User Join Date: Nov 2001 Location: Moneta, VA USA Posts: 3,082	Re: The Ulitmate Craigslist find thread Nice truck, but the GVW does not make any sense. A single Axle Chevy should not have any more than 35,000 at the most. Unless it used to be a Tandem Axle truck. __________________ '60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan

10-17-2020, 10:30 PM	#803
Dannny B Registered User Join Date: Nov 2016 Location: Van Nuys, California Posts: 186	Re: The Ulitmate Craigslist find thread "478 V8 high torque gasoline engine" Nope, the 478 was a V-6 https://www.macsmotorcitygarage.com/...cubic-inch-v8/

10-22-2020, 02:37 PM	#808
CarolinaHD Moderator Join Date: Aug 2017 Location: Cabarrus Posts: 417	Re: The Ulitmate Craigslist find thread On facebook marketplace but found a nice set of 6 lug Original GM Budd 22.5” tubeless rims outside of Lexington Kentucky. He was going to give them to me for free if i swapped my old wheels but i have the 5/10 lug pattern. The whole chassis is for sale as well. His name is Dustin, 606-524-2894 https://www.facebook.com/marketplace...67649954082567 Attached Images __________________ Alex 1967 C50 292ci Lumber truck 1967 C50 292ci Dump truck 1967 C60 366ci Fire truck

11-15-2020, 10:46 AM	#811
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Re: The Ulitmate Craigslist find thread Nice. Hope someone can post pics from the ad. Wish the pics were a little better. https://eauclaire.craigslist.org/hvo...217013246.html __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-15-2020, 06:42 PM	#813
C10 - C90 Bill Registered User Join Date: Nov 2001 Location: Moneta, VA USA Posts: 3,082	Re: The Ulitmate Craigslist find thread A real beauty. I would take that over a brand new truck any day. __________________ '60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan

11-16-2020, 12:35 AM	#814
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 740	Re: The Ulitmate Craigslist find thread I've never seen that series truck with factory AC.

12-05-2020, 05:17 PM	#815
Maytag906 Registered User Join Date: Dec 2019 Location: South Bend Posts: 56	Re: The Ulitmate Craigslist find thread 1975 C 90 on FB Cummins with a 13 speed. https://www.facebook.com/marketplace...code=undefined Attached Images

12-06-2020, 07:17 AM	#816
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	Re: The Ulitmate Craigslist find thread That didn't take long. It says it's no longer available

12-13-2020, 02:35 PM	#818
MusicMan70 Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 1,842	Re: The Ulitmate Craigslist find thread Fire Truck - Brush Rig - Diesel, 89k miles - $9,500 (Camas) https://portland.craigslist.org/clk/...237092997.html I like the look of this one. Attached Images __________________ MusicMan70 1961 GMC Suburban

12-20-2020, 06:56 AM	#819
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,482	Re: The Ulitmate Craigslist find thread Front view of this C60. Says its still for sale. Factory air to boot. Attached Images __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck

01-01-2021, 10:35 AM	#820
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,278	Re: The Ulitmate Craigslist find thread HAPPY NEW YEAR everyone. Starting the new year off with this little GMC gem! $8900. Not mine but.... https://portland.craigslist.org/mlt/...252624630.html I have my lovely dam truck for sale The reason is moving out for my business This truck work good Low mileage 11500 it’s the building And transmission 25000 miles in it Give me a call For more information my phone number is show contact info Thank you for your time Attached Images __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

02-12-2021, 04:31 PM	#821
gigamanx Senior Member Join Date: Sep 2016 Location: Hershey, PA Posts: 1,004	Re: The Ulitmate Craigslist find thread Thought you all might like this Facebook marketplace post for a 59 International near me with a F350 chassis. 1959 International Harvester R190. F-350 chassis which has been completely refinished and frame coated. Inside and out, this truck is very clean and free of rot or rust minus the patina finish. All doors and windows have tight seals, the windows operate properly, windshield wipers work properly, The cab has been clear coated with professional automotive clear. Peterbilt visor, custom made mirror brackets, All brake and steering components are brand new. Power steering, 4 way air ride, custom heavy duty rear 4 link, train horns. 2 brand new Kenworth 50gal fuel tanks with transfer switch in the cab. New P pumped Cummins 4bt with valves, valve springs, Injectors and head studs. Intercooled. Freshly built NV4500 with brand new South Bend Clutch, flywheel, and hydro kit. $30,000 https://www.facebook.com/marketplace...rral_code=null __________________ Current Build Thread 1930 Ford Model A Modern Twist: Ford Model A Rat Rod With a Modern Twist Build Thread Phase 1 "The Swap": 1949 3100 with S10 swap. Beginner build with ambition! Build Thread Phase 2 "The Drop": Beginner Build with Ambition gets Air Ride

02-13-2021, 04:19 PM	#822
Pick121 Registered User Join Date: Jan 2021 Location: Tahoe City, CA Posts: 166	8 trucks, C20-C50, 1964-1981 Found this today, CA San Francisco Bay Area: They look rough maybe not an un-damaged panel in the lot...and doubt willing to part out but who knows! PS NOT mine. https://sfbay.craigslist.org/sby/cto...275257960.html From ad: “all these trucks have been sitting for many years , all will need work to run and drive . 1981 c30 service bed 292 l6 4spd pb $1000 1981 c30 mech's bed ,pb 292 l6 $1000 1986 c30 350 4spd service bed ps pb $1500 1979 c20 pickup stepside 250 l6 4spd missing passenger fender and doors are messed up $700 1977 c30 no bed 350 4spd ps pb twin tanks $1000 1974 c50 no bed 250l6 4spd pb $1500 1965 gmc 4000 v6 4spd 2spd r/e 5-6 yard dump truck $1000 1964 gmc 4000 v6 4spd 2spd r/e $1500 these trucks have been sitting for years , most everything ran when parked.” __________________ -Pickman (Mike) 1964 C10 Fleetside LWB “George” 1963 C50 “Green Machine” 2019 Silverado 2500HD My story (Welcome Page)

02-25-2021, 11:37 PM	#824
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: The Ulitmate Craigslist find thread https://www.facebook.com/marketplace...ok_story_share __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.



Register or Log In To remove these advertisements.

03-06-2021, 02:56 PM	#825
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,278	Re: The Ulitmate Craigslist find thread A gem from the PNW. A 48 for $20000. Not mine! https://portland.craigslist.org/yam/...281443219.html 1948 GMC CABOVER==ORIGINAL TRUCK==270 GMC 6-CYLINDER, REBUILT==TWO STICK 5 AND 4 TRANSMISSIONS==NEW BRAKES==AS NEW TIRES==NEW WIRING TOUGHOUT==12 VOLT==2-SPEED HAND CRANK EXTEND-A BOOM HOIST-ORIGINAL EQUIPMENT==NO RUST==NICE BED Attached Images __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

Register or Log In To remove these advertisements.