Do you need '64-'66 Chevy Truck Parts?

[LILRED66]

Originally Posted by l79m20

I need a 66 starter switch with key and tumbler complete , have you got such an animal?f so how much? Kirby

Kirby:

Thanks for your business and patience. Your items will ship on Tuesday, via USPS, Priority Mail.

[LILRED66]

Originally Posted by JRBECK64

Have you got a good chrome Grill? I powder coated mine and I am not happy with it.
JRBECK64

Its for a 1964

Chrome or factory anodized aluminum? I don't have any aftermarket chrome grilles, but I do have some good, used factory anodized aluminum grille shells.

[LILRED66]

Originally Posted by kawirider

do u have any complete lwb fleet beds?

I do, but crating and shipping are way too expensive to justify disassembly and shipping it from Kansas City to NY.

[LILRED66]

Originally Posted by Joemomma1

I have sent you several reply e-mails, so let me know if I can help you with any parts in the future, based on the information I provided. Take care and thanks for the opportunity.

[LILRED66]

Originally Posted by wrench_65

hey am looking for a grill support. thanks

Thanks for the inquiry. I have a few very good, used '62-'66 Chevy grille supports, is you still need one. They are rust-free and dent-free.

They are $125.00, including shipping, via UPS Ground.

I accept PayPal at:

4-5-6chevytrucks@sbcglobal.net

or money order at the address in my signature.

Thanks for the opportunity and please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future.

[LILRED66]

Originally Posted by Dennis Brusenski

Thanks Tony,

I hope everything works out. When you get up to speed let me know, i'll need some parts

Dennis

Things are starting to look-up for me, so let me know if you still need any good, used '60-'66 Chevy/GMC truck parts and thanks for the opportunity.

[LILRED66]

Originally Posted by Mike Whitmore

Wondering if anyone has put a 327 in where a 6 cyl. was ? do I need special motor mounts? Thanks. Mike Whitmore

If you need some help with the motor perches to do this swap, please let me know.

[LILRED66]

Originally Posted by joe231

Mike!
If your truck didn't have a 292 originally (the 292 mounts are offset), all you need is the correct v-8 mounts, the perches from the frame are the same.


And I agree with Mike, if there is anything we can do to help, let us know.

Joe:

Thanks for the support.

[LILRED66]

Originally Posted by Squeaky1966

I need a few parts actually but I figure I deffinately need a horn button my got lost somewhere I have no idea and I also need a heater knob and a windshield wiper knob

I have these items, if you still need them.

[wrench_65]

hey tony do you have a pic of the grill support????

[LILRED66]

Originally Posted by wrench_65

hey tony do you have a pic of the grill support????

I don't right now, but I should be able to get some on Wednesday.

[lostnthe60s]

Hey, I need two doors, a drivers side fender and a drivers side fleetside bedside. Do you have any of those? Prefer parts for a custom cab. I'd rather not drill if I don't have to. Are you in Kansas City?

Thx

[LILRED66]

Originally Posted by lostnthe60s

Hey, I need two doors, a drivers side fender and a drivers side fleetside bedside. Do you have any of those? Prefer parts for a custom cab. I'd rather not drill if I don't have to. Are you in Kansas City?

Thx

Welcome to the forums and thanks for the inquiry. I have a few good, used door shells and a few good driver side front fenders. Are you looking for a swb or lwb fleetside bed side?

My shop is located in Kansas City, KS, just across the state line from Kansas City, MO.

[lostnthe60s]

Thanks, i am so thankful I found this site. I have a 66. I bought it about 13 years ago and sold it about 5 years ago. I really regretted it, but I was fortunate enough to buy it back. I've owned a 63, 64, 65 and 66. One was a one ton with pwr brakes, power steering and Air. Wish I had that one back. Need SWB.

Thx

[LILRED66]

Originally Posted by lostnthe60s

Thanks, i am so thankful I found this site. I have a 66. I bought it about 13 years ago and sold it about 5 years ago. I really regretted it, but I was fortunate enough to buy it back. I've owned a 63, 64, 65 and 66. One was a one ton with pwr brakes, power steering and Air. Wish I had that one back. Need SWB.

Thx

PM sent regarding the good, used door shells, driver side front fenders and swb fleetside bed.

Thanks for the opportunity.

[283 Man]

Tony can I have your address is it the address in under your name? to send you a money order for
(LILRED66) wall clock its $18.00 right? Tony hope things are going better for you.Im here as a friend supporting you buddy. lots of other guys here too.

[lostnthe60s]

Can you give me a link to pic or send me some pics?

[BR3W CITY]

Do you have any of the sill panels, for where the rocker/carpet meet? I would need a set (both mine have damage)
Thanks

[LILRED66]

Originally Posted by 283 Man

Tony can I have your address is it the address in under your name? to send you a money order for
(LILRED66) wall clock its $18.00 right? Tony hope things are going better for you.Im here as a friend supporting you buddy. lots of other guys here too.

Mort:

Thanks for your support. I really appreciate it.

Which truck are you looking for on the clock face? I have several left, but I don't recall which trucks, so let me know and I will check to see if I have it. My mailing address is in my signature.

Thanks for your business and support.

[LILRED66]

Originally Posted by lostnthe60s

Can you give me a link to pic or send me some pics?

I don't currently have any photos on my computer, but I will get them. It has been storming here for the past 24 hours, so I haven't been able to be outside to take photos, but I will get some and forward them to you of the fenders and door shells.

[LILRED66]

Originally Posted by BR3W CITY

Do you have any of the sill panels, for where the rocker/carpet meet? I would need a set (both mine have damage)
Thanks

Thanks for the inquiry. I have a set of reproduction chrome door sills, including stainless steel screws, that is virtually brand new. I installed them in one of my trucks and later decided to part the truck out, so I have a very nice set. They were $19.95 each, plus $2.95 for the screws, per side, plus tax. I have a little over $50.00 in the set, including the screws and tax. I will take $45.00, including shipping for the set with the mounting screws.

I accept PayPal at:

4-5-6chevytrucks@sbcglobal.net

or money order at the address in my signature.

Please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

[Joemomma1]

Originally Posted by LILRED66

I have sent you several reply e-mails, so let me know if I can help you with any parts in the future, based on the information I provided. Take care and thanks for the opportunity.

Payment sent. Thanks again.

[283 Man]

Do you have one of your black one dont remember the name thats the one I want.thanks Morton

[LILRED66]

Originally Posted by 283 Man

Do you have one of your black one dont remember the name thats the one I want.thanks Morton

I do have some of BCKNBLK, the '66 K10.

[Byronic]

Tony,
Do you carry any burb parts? I'm looking for the interior pieces that run above the side windows down the length of the truck. They tie the headliner to the sides of the truck.