OR 100's of misc parts from the last 6 trucks parted out

[tll74]

Originally Posted by Sheetaki

Any updates?

I dug out the visor today and it looks fine. I took pics but my phone and computer won't get along tonight. The wife will fix that tomorrow.

Originally Posted by tbagger61

Have any of the alt. brackets left?

Yes. what year and engine size?

Originally Posted by erikgto

any chance you have a nice driver quality set of 3/4 ton GMC hubcaps?
Need em for my 72 Sierra 2500 custom camper

Thanks!
erik

Sorry no GMC caps.

Originally Posted by 71proj

Hey Tom,

I am interested in the trailing arms. The shipping would be to 01702. Any chance you have any pics....pm or post? Thanks!

Would you have a set of trailing arms, in good condition? I would need them shipped to 01702. Thanks.
I have a very nice pair that have been hot tanked and dipped. 150.00 plus shipping.

Like I mentioned I do have a very nice pair. I have pics but can't get my phone to communicate with the computer. I'll get shipping cost.

Originally Posted by pimpston65

is that aqua 67 type armrest still around? also the antenna, and the auto crossmember.

Yes on the crossmember and I'll check for the armrest. No on the antenna.

Originally Posted by THoeler

Please advise on the 2wd Automatic cross-member 40.00 plus shipping to 08005

22.00 shipping. I have several of them.

Originally Posted by robertnfrappuls

I need the brake pedal rod for a power brake setup that goes from the pedal to the upper pivot on the bracket. Have any available?

Sorry nothing other than the bracket mount kit with the rod.

Originally Posted by 6772iron

I NEED A POWER STEERING PULLY [ crank] 72=402 w/air THANKS BRAD

Should have I'll look.

Originally Posted by 54blackhornet

Hi tom, would you happen to have a alternator bracket for a 71 C-10 ? 350 ps no AC . Thanks Jack in Elgin

Hey Jack, do you need the upper adjustment bracket or the lower cast iron mount?

Originally Posted by engairuph

3 Window cranks
2 Deluxe front amber marker lamps
1 Backup lens
If still available I will doo paypal just need total and name

Yes on Window cranks, reverse lens (what year?) Yes on the lens but sun faded. Please send me pm.

Originally Posted by 56 chevy

looking for 72 chevy c-20 dog dish hub cap chrome with blue bow tie please let know if you can help

Nothing other than DQ. Are looking for nice nice?

Things have slowed down for me so should be able to keep with this thread. I'm going Elk hunting in a couple weeks though. Thanks, Tom

[jervin]

Hello, would you have a two-grove water pump pulley for a 292? I'm converting to power steering and need the extra grove for the alternator. thanks

[54blackhornet]

Tom,I need the upper adjustment arm. Thanks ! Are you headed this way anytime soon ? Hunting

[kda2000]

Tom,

I'll take the Driver's side lower control arm for $25 plus shipping -- any chance you would have a picture or two? Can you PM me with payment details - shipped to 78737 Thanks, Ken

[terryggoround]

I'll take one of the windshield washer hose set . Can I send PO mo. Please pm info
Thank you

[56 chevy]

can you send pic of DQ ones with price be ok for now thank you

[jdean]

Geez, 33 pages of posts! I'm after a wiper switch if you still have one. Not looking for a showpiece, just has to work for my 69 c30 dumptruck. Cheap shipping to 97009. I'm in Boring, not too far from you. Just pm paypal and i'll send payment if you have one. Thanks

[56 chevy]

I'm looking for one hub cap my truck is missing one have not heard from you

[Sheetaki]

Originally Posted by tll74

I dug out the visor today and it looks fine. I took pics but my phone and computer won't get along tonight. The wife will fix that tomorrow.

Alright, just let me know. You can pm me your paypal or put it here, whatever works.

[jdean]

Scratch my post. nevermind

[SLY-C10]

Looking for a high trans hump for a 68 C10 if you have one

Cheers

[mattowar]

If you still have 2 of the GMC1500 fender badges I will take them

[71proj]

Hi Tom,

Sent payment via PayPal and PMed you the shipping address.

Thanks!

[bonnieclyde100]

do any of those intermediate shafts go to the gear box with 13/16 shaft diameter?

Originally Posted by tll74

Hi guys, I have sorted out a bunch of parts from the last 6 trucks I have parted out. Al parts are cleaned and ready to ship. . Shipping on small items will be via USPS and larger-heavy items will be via UPS. I will respond to all post in the evening as I have a 8-5 daytime job. I'm on the west coast so I'm 2-3 hours behind many of you. Combined shipping no problem. Please reply in the thread.
Thanks, Tom

Please list what you are paying for rather it be Paypal or a mailed check.

Pic 1
Visors 20.00 each Black and one pair of olive green are Sold
inside mirrors: 71 olive green better than average glass 23.00 SOLD, 69-70 brown and black average glass 17.50
72 LH armrest needs painted DQ 10.00 SOLD
67-68 armrest 17.50
2-72 olive green armrest 17.50 each Sold
3-70 olive green armrest 17.50 each
70 olive green seat belts 2 pass 95.00 very nice Sold
68? green (turquoise?) 3 pass 125.00 very nice on hold, the wife thinks she wants them for her 68
Glove box doors 1 green 69 GMC, 1 brown 70 GMC, and 1 green Chev 22.00 ea
2 67-70 front - rear (first connection) brake lines nice cond 25.00 ea. plus sh.
3 ashtrays all green 12.50
Dome lens housing with wiring (was chrome) 12.00
2 67-70 GMC horn buttons 9.00 each
head liner retainers tan from 70 GMC with gold interior 7.50
5 headlamp switches with plain and chrome knobs 10.00 each
6 wiper switches with plain and chrome knobs 7.50 each
cigarette lighter 7.50

Pic 2
2 RH outside door handles DQ 15.00 each
2 LH outside door handles DQ 17.50 each SOLD
10 inside door handles 7.50 each
6 window cranks 7.50 each
71-72 turn lens housing nice 17.50
1 back up lens nice 7.50 each
3 tail lamp lens nice 12.50 each Sold
cargo lens, housing (pitted) and rubber 15.00 Sold
cargo lens, housing (nice), rubber, switch and wiring (not in pic) 60.00
white mirrors off 1970, ding in housing, glass DQ has light scratches 50.00
5 original front amber marker lens good color 6.50 each
1 original rear red marker lens good color 6.50
2 rear deluxe red marker lens good color 8.50 each Sold
2 front deluxe amber marker lens faded 6.00 each Sold
4 GMC turn lens-housing good color 15.00 each
5 horns 10.00 each
dome lens and white housing 12.50SOLD
dome lens and chrome housing (chrome gone) 8.50
5 wiper arms with original blades 12.50 each
4 wiper arms without blades 10.00 each
1970 350 point distributor 25.00
4 e-brake cable from cab to frame 18.00 each (only one in pic)
cab vent 6.00
washer res. cap w/hose 4.00
spark plug heat shield set- acid dipped and rust free 27.50SOLD
3 windshield washer hose sets complete 12.50 each

Pic 3
Fender emblems:
2 GMC 1500 V8 8.00 each
2 GMC 2500 V8 8.00 each
2 GMC 2500 custom camper 8.00 each
2 67-68 chev 20 8.00 each SOLD
69-up custom/10 10.00
1 pair K/5Blazer 40.00SOLD
1 pair Custom/20 27.50 (I hot tanked these and the black is gone)
1 pair Sierra Grande 75.00 nice, no studs
1 pair Custom good studs 11.00
8-350 7.50
deluxe 5.00

2 tail gate center moldings 12.50 eachSOLD
4 E-brake cables with all supports LWB only 27.50 each
4 oil pressure lines for sbc 10.00
4 GMC turn/park lamp wire looms 6.00 each
2 ground straps (valve cover-firewall) 3.00 each
2 vent pull rods w/knobs media blasted 4.50 eachSOLD
RH GMC eyebrow minor ding nice driver 15.00
LH GMC eyebrow ding lower corner DQ 15.00
2 69-72 sbc alt brackets complete w/bolts 29.50 each
69-72 sbc upper alt adjustment bracket 15.00
2 67-70 throttle mech. w/ 2wd-Q-jet rod 22.50 each
67-70 gas pedal 7.50
2 69-72 steering column intermediate shafts 27.50 each
2 lower metal steering column bezels 5.00 each
2 lower dash pedal stop brackets 6.00 each
67-68 2wd LH exhaust manifold original GM nice condition 65.00
67-72 2wd RH exhaust manifold used aftermarket plugged A.I.R. holes 50.00
69-72 sbc 2 groove water pump pulley 13.00SOLD

67-72 sbc single groove crank pulley 11.00SOLD
sbc LH exhaust gasket sleeve 5.00
sbc RH exhaust gasket sleeve 5.00
RH 71-72 headlamp bezel DQ minor sand pit 12.00
LH 71-72 headlamp bezel DQ small ding-sand pit 9.00
67-72 GMC RH chrome headlamp bezel nice 17.50
70 green dash bezel only chrome in typical cond. Sold

Pic 4
4 69-72 7 blade flex fans 23.00 each
70 1/2T Bendix power brake booster assy w/prop. valve 75.00SOLD
71-72 3/4T Moraine dual diaphragm booster assy w/prop. valve 85.00
3 original antenna's 2 telescoping and 1 single mass (newer mast) 33.00 ea. One tele. antenna (w/o spring) SOLD
set of door edge guards very nice DQ 25.00
71-72 gas pedal w/cable 27.50 SOLD
3 taillamp wiring harness's for lwb (from cab to bumper) 15.00 each one sold 2 remaining

More to come.

[engairuph]

2 window cranks, and 1 headlamp switch pm me with total and paypal info

[tll74]

Originally Posted by jervin

Hello, would you have a two-grove water pump pulley for a 292? I'm converting to power steering and need the extra grove for the alternator. thanks

Sorry no 292 only P/S water pump pulleys.

Originally Posted by 54blackhornet

Tom,I need the upper adjustment arm. Thanks ! Are you headed this way anytime soon ? Hunting

No, we didn't draw our tags. We are going to hunt outside of John Day. I could ship it to you for 22.00 delivered.

Originally Posted by kda2000

Tom,

I'll take the Driver's side lower control arm for $25 plus shipping -- any chance you would have a picture or two? Can you PM me with payment details - shipped to 78737 Thanks, Ken

PM returned

Originally Posted by terryggoround

I'll take one of the windshield washer hose set . Can I send PO mo. Please pm info
Thank you

PM sent

Originally Posted by 56 chevy

can you send pic of DQ ones with price be ok for now thank you

Ok, I'll get some pics.

Originally Posted by Sheetaki

Alright, just let me know. You can pm me your paypal or put it here, whatever works.

I went to retake the pics and noticed that the stiching is coming loose. Still intersted?

Originally Posted by SLY-C10

Looking for a high trans hump for a 68 C10 if you have one

Cheers

75.00 plus shipping. Got a US address or all the way to "down south"?

Originally Posted by mattowar

If you still have 2 of the GMC1500 fender badges I will take them

Yes I have them. 23.00 shipped

Originally Posted by 71proj

Hi Tom,

Sent payment via PayPal and PMed you the shipping address.

Thanks!

Shipped today via UPS. Thanks Again.

Originally Posted by engairuph

2 window cranks, and 1 headlamp switch pm me with total and paypal info

Payment received.

Thanks, Tom

[tll74]

bonnieclyde100, Not sure of the spline count. They are all the same shafts from 69-72.

[SLY-C10]

Originally Posted by SLY-C10 View Post
Looking for a high trans hump for a 68 C10 if you have one

Cheers
75.00 plus shipping. Got a US address or all the way to "down south"?

All the way to OZ brother.. I'll shoot you a PM with the address and we can work out shipping, USPS no rush is fine.

cheers

[Senorx]

Looking for a Quadrajet carb stud and Wingnut like this or close to it. For a 71 SBC 350 with original 4 barrel Quadrajet.

[suville]

Got a pair of 6 cyl engine stands? Zip 83647 Thanks for your time

[69SCSS]

You have any of those ashtrays left? I need a dark green one, looks like the bottom one in your first pic. If so, shipping to 98661?
Thanks, Al

[pimpston65]

is the 67-68 teal armrest still for sale? if so i'll take it

[68Bowtie4x4]

Do you have any chrome heater control panels non-A/C that all the levers are good on?

Please let me know ASAP.

Thanks.

[TBONE1964]

Hello all,

I was asked by Tom (tll74) to let everyone know that he will be available to respond to request after the 18th. He is away on a hunting trip currently.

Thank you,
Tom

[engairuph]

When you talk to him see when he will send my parts? Already paid and need them like last week.
Thanks