![]() |
![]() |
#8426 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: What did you do to your truck today?
Not much done today, but still a result that had me chuckling, as I did something new again, making it up as I went.
Which is something I always like to do. My mate Martin who is doing up a 1965 C10 needed a glove box inner, as his original had long since rotted away, being made from paper mache, or something similar. I had volunteered to make him a new one from ally plate or thin sheet metal in exchange for the side mirrors he had removed from his truck a few months ago. Started by rummaging around the garage till I found a good base to work with. The back of an old steel filing cabinet (I think that's what it was) that was probably around 1mm thick. Next up, empty out my glove box to see what I am working with. ![]() Removed it by unscrewing 5 screws. ![]() Laid out the steel plate, carefully copied all the reference points on the made glove box, then connected the dots with a red marker and also shaded in the areas that needed cutting away. ![]() One Angle grinder, a 2mm blade and three minutes later we have this, still needed working back with a hand file to smooth off the edges. ![]() At this point I went up to the house to make a coffee, and then walked back to behind the garage where we grow our vegetables, and where I planted a Conference pear and Star King apple tree two years ago. Last year each tree presented me with two fruits, this year the pear has retained about 15 pears and the apple tree has about 25 apples which range in size from what you see in my hand, to some a bit bigger still. These apples are pleasantly sweet from the smallest to the largest, which pleases me immensely. So I ate a few apples, feeling very smug, then came back in to carry on with the box. ![]() Back in the garage the next session of rummaging started, to find the right bits of wood to use to bend the plate to shape. ![]() Once all the sides were folded, it stayed in shape without any encouragement. I WAS SURPRISED. ![]() I then quickly clamped, and tack welded the tabs rather than rivet them as mine has been done. ![]() Ground back, the last job was to give it a coat of primer, mostly as rust preventative. Martin can paint the outside if he wants. I know he wants to carpet the inside with thin automotive carpet. ![]() I then hoped onto the bike and rode the 15 miles to Martins to deliver and collect...... Got there, and he had removed the heavy agricultural bumper from the truck and had just finished welding in a new rear roll pan, which looks great. ![]() After a chat and him sparaying some red oxide primer over the new roll pan, we lifted and refitted the tailgate, which I have to say fits nicely. Still needs some fine tuning. ![]() Last thing once we had stood back, enjoyed it, and gotten the approval of his wife, Amanda, was for me to grab my well earned mirrors and come home, as I still had some jobs to do at home as well. ![]() And that is where today with the truck ended.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. Last edited by Grizz1963; 08-31-2013 at 01:48 PM. |
![]() |
![]() |
#8427 |
Registered User
Join Date: Aug 2013
Location: Roanoke, Va,
Posts: 8
|
Re: What did you do to your truck today?
Pulled the carburetor to begin the rebuild, much to the dismay of the resident mud daubers... got the bed out of the way. Should have a 4x4 frame ready to post in parts for sale before too much longer!
![]()
__________________
1962 Chevy C10.... the project begins... |
![]() |
![]() |
#8428 |
Registered User
Join Date: Mar 2013
Location: Missouri City, Tx
Posts: 321
|
Re: What did you do to your truck today?
Drove my first 50 miles since buying it in March, today is a good day. Lol.
Posted via Mobile Device |
![]() |
![]() |
#8429 |
Registered User
Join Date: Oct 2012
Location: Philly, PA
Posts: 539
|
Re: What did you do to your truck today?
Didn't have lots of time to work on the truck, so I constructed a burp bottle based on this article. White was the color of the day, came out to under $20, including new hose for the hook up.
__________________
My truck ain't dead, it just smells funny. |
![]() |
![]() |
#8430 |
Registered User
Join Date: Apr 2012
Location: Sunny Youngwood PA
Posts: 463
|
Re: What did you do to your truck today?
Very cool Grizz - great tech on the glove box ;^)
I seam-sealed the 62 windshield flange area at the cowl and A-pillars and tops of the door openings. Repaired the PO's gun rack mounting holes in the cab's interior panels (one went all the way through and was poking out the back of the cab above the window - ouch down at the car wash!). Sprayed some epoxy primer... sorta then ran up to my buddy's paint shop to see what the heck was up with my HVLP gun... it was more of the guy holding it than the actual gun's fault. One thing this build is teaching me is IF YOU DON'T USE IT - YOU WILL LOSE IT. Pulled some major tree-limb dents out of the cab roof on the DS and filled those areas to smooth them the rest of the way. Fun day with my son in the garage. rg & ray~ray |
![]() |
![]() |
#8431 |
Registered User
Join Date: May 2013
Location: Dallas Area, TX
Posts: 38
|
Re: What did you do to your truck today?
All the pictures in my build thread, but finished my Dash Cluster rebuild today.
![]() |
![]() |
![]() |
#8432 |
Registered User
![]() Join Date: Feb 2009
Location: Lebanon, Oregon
Posts: 130
|
Re: What did you do to your truck today?
Pulled the lights, grille, bumpers and mirrors off my 1966 C-10, prepping it for primer grey and then a coat of a light tan. Now, time for a wash and roughing up the old Dark Yellow paint.
__________________
Eugene, Oregon Lucy's Limousine 1966 C-10 LWB 283 w/ 2bbl, OE carb and dist. 4 spd (granny 1st) w/ 3.73 rear end |
![]() |
![]() |
#8433 |
Registered User
Join Date: Jun 2012
Location: Portland
Posts: 1,330
|
Re: What did you do to your truck today?
This actually happened about a week ago, but I bought my old truck back after 7 years!
66 GMC 3/4. Looks like it was stored in a time capsule. Seven years ago I put in a fuel injected 350 and 700r4. Doesn't run currently, so I took the opportunity to begin stripping ALL the wiring, as well as ordered a new computer system and wiring for it (Megasquirt to replace the stock ECU). Looking forward to continuing where I left off in College! ![]() |
![]() |
![]() |
#8434 |
Post Whore
![]() Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: What did you do to your truck today?
Drove my truck today and put a new intake and exhaust gasket in, that cured my exhaust leak.
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
![]() |
![]() |
#8435 |
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: What did you do to your truck today?
Congrats on repurchasing your old truck, and in good condition. That's a real rarity. It certainly appears to be a beauty.
Quote:
__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502 |
![]() |
![]() |
#8436 |
Registered User
Join Date: Aug 2013
Location: Rochester Wa.
Posts: 395
|
Re: What did you do to your truck today?
Sorry for no pics, but today I cut off the old farmer bumper, and dry fit my rear pan, Ill paint the areas and assemble tomorrow.
|
![]() |
![]() |
#8437 |
GMC's n H.D.'s too!
![]() Join Date: Oct 2010
Location: Nampa, Idaho
Posts: 1,583
|
Re: What did you do to your truck today?
Still no pics Ricky? I'd like to see this!
|
![]() |
![]() |
#8438 | |
Registered User
Join Date: Feb 2009
Location: southeasternfoothillsofusa
Posts: 1,557
|
![]() Quote:
HTH, Sam |
|
![]() |
![]() |
#8439 | |
Senior Member
![]() Join Date: Jan 2012
Location: Austin, TX
Posts: 555
|
Re: What did you do to your truck today?
Quote:
Question: the overflow fitting on the rad cap neck runs to the fitting on the bottom of the burp bottle but what does the top fitting on the burp bottle hook into? Thanks! |
|
![]() |
![]() |
#8440 |
Senior Member
![]() Join Date: Jan 2012
Location: Austin, TX
Posts: 555
|
Re: What did you do to your truck today?
Looks like it might be the breather hose on the top fitting and it doesn't attach to anything. AMIRITE?
|
![]() |
![]() |
#8441 | |
Registered User
Join Date: Oct 2012
Location: Philly, PA
Posts: 539
|
Re: What did you do to your truck today?
Quote:
Posted via Mobile Device
__________________
My truck ain't dead, it just smells funny. |
|
![]() |
![]() |
#8442 |
Registered User
Join Date: Aug 2012
Location: Rathdrum ID
Posts: 1,128
|
Re: What did you do to your truck today?
I actually got thee new mufflers put on last week. They are a lot quieter and will make driving it much nicer. Before and after. Doesnt sound much different on the vid I guess but it is worlds apart.
![]() ![]()
__________________
66 shorty ![]() |
![]() |
![]() |
#8443 |
Registered User
Join Date: Apr 2011
Location: Edmond, Ks
Posts: 595
|
Re: What did you do to your truck today?
Got four of the six bolts holding my SM318 tranny in removed. She'll come out this Saturday and get a good cleaning, a new throwout bearing, pilot bearing, and mounts. Have to have the clutch plate rebuilt (smear more "asbestos" on it) then hopefully she'll be purring like a kitten again.
__________________
Step by steps: Remove primer to reveal original paint Rebuild a carburetor See My Build - Cecilia! ![]() Some people are like slinkys. Not worth much but funny as heck when pushed down stairs. |
![]() |
![]() |
#8444 |
Registered User
Join Date: Aug 2011
Location: Montrose, CO
Posts: 972
|
Re: What did you do to your truck today?
Just getting ready to go out and put this stuff in. Wish me luck!
|
![]() |
![]() |
#8445 |
Registered User
Join Date: May 2013
Location: Scottsdale, AZ
Posts: 373
|
Re: What did you do to your truck today?
Mine got photoshopped thanks to McCoy AZ. I wanted to see what it would look like lowered and with chrome rims. I was originally thinking chrome center caps but now that I have seen the photoshop I am thinking it might look far more *****ing with chrome smoothies. Here are the original and the altered images:
![]() ![]() |
![]() |
![]() |
#8446 |
Registered User
Join Date: Sep 2012
Location: Kennewick, WA
Posts: 128
|
Re: What did you do to your truck today?
I thought it looked perfect in the first pic
__________________
-Jason '66 C10 LWB 2 BBL 283 w/ T-5 '90 V1500 Suburban TBI 350 w/ 700R4 |
![]() |
![]() |
#8447 |
Registered User
Join Date: Dec 2011
Location: Creighton Sask. Canada
Posts: 4,121
|
Re: What did you do to your truck today?
First pic, not lowered and black rims...is the it picture.
__________________
1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's. |
![]() |
![]() |
#8448 |
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: What did you do to your truck today?
Slapped on a set of 3 bar simulated knock offs last night. Not sure yet if they are an improvement or not. I guess time will tell:
![]()
__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502 |
![]() |
![]() |
#8449 |
Registered User
Join Date: Nov 2009
Location: Austin Texas
Posts: 370
|
Re: What did you do to your truck today?
![]() Got one side of my disc brake and drop spindles done. I'll finish the other side tonight. Can't wait to see it with all four of the steelies. Posted via Mobile Device
__________________
BaBaBooey BaBaBooey ![]() GO SPURS GO!!! |
![]() |
![]() |
#8450 |
Registered User
Join Date: Oct 2011
Location: Blanchard Oklahoma
Posts: 424
|
Re: What did you do to your truck today?
Carpet and seats installed.
__________________
My Build CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640 |
![]() |
![]() |
Bookmarks |
|
|