The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > Squarebody Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-23-2012, 07:58 AM   #1
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Smile My new project 86 Silverado

Here is my find, was sitting in a field 13 years, had a few trees growing around it. scored it for 1200.00.
it is a 86 Silverado, cruise, tilt, power windows/locks, ac. It has a 305 4bbl, with a swapped in TH400. It currently is sitting with only the cab on it, as I am in the process of doing a frame off. It will have all trim removed, has surface rust only, all panels straight, and will be flat black once it is done. I hope to start a build thread once real warm weather starts here in the mountains

Kind regards,
Attached Images
 
naphtali5725 is offline   Reply With Quote
Old 03-23-2012, 08:20 AM   #2
Big Blue
Registered User
 
Big Blue's Avatar
 
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 642
Re: My new project 86 Silverado

Welcome naphtali5725, Great looking 86. I like the style truck.
Keep us informed on you progress.

John
__________________
Big Blue ( John )
79 Chevy Pick up.....My Dailey


STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.
Big Blue is offline   Reply With Quote
Old 03-23-2012, 08:53 AM   #3
bbbc10
Diggin The SquareLife
 
Join Date: Dec 2010
Location: garland,tx
Posts: 1,933
Re: My new project 86 Silverado

nice start!!!
bbbc10 is offline   Reply With Quote
Old 03-23-2012, 12:12 PM   #4
Lost 40
Registered User
 
Lost 40's Avatar
 
Join Date: Mar 2011
Location: Grand Rapids, MI
Posts: 60
Re: My new project 86 Silverado

Welcome. I have an 86 Silverado as well, and look forward to hearing more about your build.
Posted via Mobile Device
__________________
1986 Chevy C10
2" Drop
350 SB
350 Turbo Trans

"Keep it rubber side down, in between the ditches"
Lost 40 is offline   Reply With Quote
Old 03-23-2012, 12:37 PM   #5
bigsj
Registered User
 
bigsj's Avatar
 
Join Date: Mar 2011
Location: Bowie Maryland
Posts: 335
Re: My new project 86 Silverado

Thats a good starter truck .
bigsj is offline   Reply With Quote
Old 03-23-2012, 12:48 PM   #6
Pop's C-10
Registered User
 
Pop's C-10's Avatar
 
Join Date: Jul 2010
Location: memphis
Posts: 2,537
Re: My new project 86 Silverado

welcome
__________________
1981 C-10 (Pop's)
1978 Camaro
2006 Lacrosse
Pop's C-10 is offline   Reply With Quote
Old 03-23-2012, 06:16 PM   #7
SBTork
Garage wrench
 
SBTork's Avatar
 
Join Date: Feb 2008
Location: LaCrosse, WI
Posts: 1,855
Re: My new project 86 Silverado

make sure to take plenty of pictures for the build thread, it looks like a nice start!
__________________
-Adam


90 V1500 GMC Suburban 350/700R4/NP241.....
01 Saturn SL1 stock DD.....
SBTork is offline   Reply With Quote
Old 03-24-2012, 04:57 AM   #8
bayou boy
Registered User
 
bayou boy's Avatar
 
Join Date: Oct 2010
Location: Frankston Tx
Posts: 151
Re: My new project 86 Silverado

Nice start im in the same boat with ya good luck
Attached Images
  
__________________
all i know is that its going to be orange
bayou boy is offline   Reply With Quote
Old 03-24-2012, 07:44 AM   #9
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

that's the route i'm going, all smooth, no aluminum trim, or any moldings.

good luck with your build, start a thread if you haven't already!

kind regards,
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 02-10-2013, 04:51 AM   #10
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

Body pics - as you can see, this truck's panels are very straight
Attached Images
     
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 02-10-2013, 04:53 AM   #11
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

more body pics
Attached Images
    
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 02-10-2013, 04:56 AM   #12
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

rolling frame
Attached Images
 
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 02-10-2013, 04:39 AM   #13
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

Well, i have decided to keep the 86 Silverado. I have an Oldsmobile 455 that I got from X-cabsquarebody on c10forum. I was also given a complete engine rebuild kit for it, pistons rings, etc. etc.

I have an engine builder in SC. that donated their machine shop services, and their time to put it together for me. The engine will be a torque monster.

Truck is down to the rolling frame now, and pressure washed, and cleaned as much as possible. I'll attach pics to this thread as soon as I can. I am probably going with the budget build route, and probably will not paint a lot of stuff...that's just how it goes, function over form.

I'm going to follow my buddy X-cabsquarebody's recommendation of leaving the body alone, and keeping the patina finish, and not priming/painting it.
I just got a new cab bushing/bed mount kit from LMC, so I can get the cab/bed back on here in the next few weeks.
I'll be taking apart the front suspension in a few days, and will replace all upper/lower control arm bushings/ball joints etc. I should have those in a couple of weeks as well.

stay tuned...
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 02-10-2013, 05:20 AM   #14
INSIDIOUS '86
Registered User
 
INSIDIOUS '86's Avatar
 
Join Date: Jul 2009
Location: washington
Posts: 4,178
Re: My new project 86 Silverado

Man I actually kinda like the patina. It's straight as hell. I would lower it and tint the windows and make the inside comfy as hell and a newer style or injected engine underneath
But that's me

Loom forward to seing how it turns out. Make it yours!
Posted via Mobile Device
__________________
377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac
3''spintech prostreet mufflers xpipe 1 3/4 headers
build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217
Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511
INSIDIOUS '86 is offline   Reply With Quote
Old 02-10-2013, 05:43 AM   #15
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

Thanks insidious for the comments

I'll need to have tinted windows anyway, because I am sensitive to the light and it gives me migraines.

As far as the engine, the Olds 455 big block makes tremendous torque with minimal modifications. A bone stock 455 with 10:1 compression and stock camshaft makes 350HP and up close to 450 ft lbs of torque at low rpm, so it's the perfect engine for a heavy truck (plus it was all free)

I want to lower it too, but I do not want to cut the frame for a C notch or anything like that, because I want to keep the frame intact. I'd like a nice coil over suspension front/rear though
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy

Last edited by naphtali5725; 02-10-2013 at 05:46 AM. Reason: added info, corrected dumba$$ grammar
naphtali5725 is offline   Reply With Quote
Old 02-14-2013, 12:07 PM   #16
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
new project 86 Silverado build

Talked to my buddy X-cabsquarebody yesterday from c10forum... he gave me lots of advice regarding the procedures for Z'ing the frame, and the steps for lowering the rear of the truck... that guy knows his stuff, and is a good friend because he offered to assist me in any way I needed, and I appreciate it big time.

I don't know which way i'll go yet, so i'm just going to concentrate on rebuilding the front suspension since all of it is worn out or rotten because it sat for 13 years (all ball joints, upper/lower control arm bushings, tie rods, idler arm, pitman arm) have perished.

I have a 12 bolt rear I got from X-cab with 2 inch drop shackles.. not sure if i'll swap out the 10 until i pull the cover and check the gear ratio to determine what would be best for my engine/tranny (TH 400) combo

March 5th i'll be taking the engine to have it machined and assembled. Once complete should put out 450+ HP, and gobs of torque which the Olds 455's are known for.

So that's it for now... stay tuned.
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 02-14-2013, 12:50 PM   #17
69GWC
Registered User
 
Join Date: Jun 2012
Posts: 1,089
Re: My new project 86 Silverado

I had a 79 square with a 455 olds in it and man that thing would fry a tire..lol. I would have to show people the motor most would not believe it had a olds motor in it.
Posted via Mobile Device
69GWC is offline   Reply With Quote
Old 02-14-2013, 01:53 PM   #18
Gigem
Registered User
 
Gigem's Avatar
 
Join Date: Feb 2012
Location: Lakeway, TX
Posts: 335
Re: My new project 86 Silverado

nice project, and thanks for your service...
__________________
1972 GMC Sierra Grande (current truck)
1980 Chevy Stepside (gone)
1987 Chevy Blazer (gone)
1972 Chevelle SS Convertible (gone)
1973 Chevy Corvette (gone)
1967 Chevy Camaro (STOLEN!)
Gigem is offline   Reply With Quote
Old 02-14-2013, 02:33 PM   #19
rs74
Senior Member
 
rs74's Avatar
 
Join Date: Jun 2010
Location: Illinois
Posts: 2,957
Re: My new project 86 Silverado

Good job on the find. It is nice to see others going through the same process as I go through mine. I will be watching your build. Here is how mine sits today. Putting on a lowering kit and all new steering and suspension parts then its off with the cab and everything to the body shop. Good luck.
Attached Images
 
__________________
Roy
85 Short Bed Silverado- Work in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=564818

1987 R10 shortie
rs74 is offline   Reply With Quote
Old 03-05-2013, 06:08 PM   #20
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

updates...



I have the truck up in the air to disassemble the front suspension, so i'm going with mcgaughys 2.5"/4" spindle/hanger/shackle kit part #93130
I ordered a front end rebuild kit from performancesuspension, hopefully it all will be here in a few days, and I can get cracking on it.

Also got a spray gun kit from TCP global, waiting on it as well.

For the body I am going with the Kirker Black Diamond paint kit from smartshoppersinc, color will be the PLATINUM SILVER METALLIC LVB-61235

For the frame, and suspension parts It will be the Kirker epoxy primer + their hot rod black urethane

so that's it for now, i'll post pics as i tear down, and install the kits

stay tuned
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 03-05-2013, 06:15 PM   #21
rs74
Senior Member
 
rs74's Avatar
 
Join Date: Jun 2010
Location: Illinois
Posts: 2,957
Re: My new project 86 Silverado

We are at about the same point in our builds. I just got the flip kit on mine and tore off the contol arms last night. I still have the cab on mine but am looking for another one to put back on.
__________________
Roy
85 Short Bed Silverado- Work in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=564818

1987 R10 shortie
rs74 is offline   Reply With Quote
Old 03-05-2013, 06:26 PM   #22
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

Quote:
Originally Posted by rs74 View Post
We are at about the same point in our builds. I just got the flip kit on mine and tore off the contol arms last night. I still have the cab on mine but am looking for another one to put back on.
your making good progress then, If my parts/paint come in, i hope to have the frame, control arms etc. painted and back together by next weekend...we'll see how it goes...good luck with your build
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 03-07-2013, 10:36 PM   #23
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

Update...
Received my spray guns in the mail yesterday.
Dropped my 455 off with Joe at cmengines.com. He walked me through their shop, and explained all the steps they'll use when building/balancing/dyno'ing my engine for the performance build. You can see the procedures on their website.
More to come...
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Old 03-07-2013, 10:40 PM   #24
rs74
Senior Member
 
rs74's Avatar
 
Join Date: Jun 2010
Location: Illinois
Posts: 2,957
Re: My new project 86 Silverado

Cool! That ought to be one torquey son of a gun.
__________________
Roy
85 Short Bed Silverado- Work in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=564818

1987 R10 shortie
rs74 is offline   Reply With Quote
Old 03-07-2013, 11:35 PM   #25
naphtali5725
Registered User
 
naphtali5725's Avatar
 
Join Date: Mar 2012
Location: NC
Posts: 1,101
Re: My new project 86 Silverado

Quote:
Originally Posted by rs74 View Post
Cool! That ought to be one torquey son of a gun.
I sure hope so
__________________
My build thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=515829

Disabled Veteran
82nd Airborne Division
Operations: Desert Shield, Desert Storm, and Uphold Democracy
naphtali5725 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:08 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com