Pops 72 cheyenne dropmember build - Page 34 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**superflysteiny** · 05-10-2011, 12:01 PM

Little update i put the ac in the cab last night got it mounted and I mounted the trans cooler under the passanger side of the cab. I will get some pictures tonight and put them up tomorrow. Thanks Eric

thor · 05-10-2011, 03:21 PM

was the vintage air easy to install? how long did it take?

54Caddy · 05-10-2011, 03:38 PM

okay so how would you take the bed off then if you ever had to? pictures at all? sorry for buggin man

GVizzle · 05-10-2011, 05:22 PM

When you get this truck done can you make a video of it rollin....I want to see this thing in action!!!!

**superflysteiny** · 05-11-2011, 11:16 AM

Quote:

Originally Posted by thor

was the vintage air easy to install? how long did it take?

I only installed the unit under the dash took me 20 minutes once the glove box was out keep in mind I have done three of these units in these trucks. But it is really east to do.

**superflysteiny** · 05-11-2011, 11:20 AM

Quote:

Originally Posted by 54Caddy

okay so how would you take the bed off then if you ever had to? pictures at all? sorry for buggin man

Ok I understand what you are asking. I welded the bolts that mount the bed to the frame. I welded the bolt heads to the stock floor then I built the false floor above the stock bed floor. So when I put the bed on the frame i just put the washer and the nut on and you are done.

**superflysteiny** · 05-11-2011, 11:21 AM

Quote:

Originally Posted by GVizzle

When you get this truck done can you make a video of it rollin....I want to see this thing in action!!!!

Once I get the engine tunned I was planning on putting up a video of the truck doing a big old burn out.

Nobaddaze · 05-11-2011, 03:59 PM

Quote:

Originally Posted by superflysteiny

Once I get the engine tunned I was planning on putting up a video of the truck doing a big old burn out.

I think i just popped wood!

dnd1978 · 05-11-2011, 04:08 PM

Quote:

Originally Posted by superflysteiny

Once I get the engine tunned I was planning on putting up a video of the truck doing a big old burn out.

And thats why we build them!!

54Caddy · 05-11-2011, 08:43 PM

ok i now understand so the bed is basically studed that is also a good idea. Thanks

thor · 05-12-2011, 02:02 PM

Quote:

Originally Posted by superflysteiny

I only installed the unit under the dash took me 20 minutes once the glove box was out keep in mind I have done three of these units in these trucks. But it is really east to do.

so prolly estimate 2 hrs for first time install? not bad at all.

big c10 · 05-12-2011, 09:07 PM

thor · 05-13-2011, 11:40 AM

Quote:

Originally Posted by big c10

???

SCOTI · 05-13-2011, 10:32 PM

Why is there a need to post pics in someone elses thread when it isn't thread related??

GVizzle · 05-13-2011, 10:36 PM

Quote:

Originally Posted by SCOTI

Why is there a need to post pics in someone elses thread when it isn't thread related??

I was wonderin the same thing.
Posted via Mobile Device

**kev2809** · 05-13-2011, 10:57 PM

man this is a sick build! looking nice as always man...you do some good work

denny5625 · 05-14-2011, 12:22 AM

Quote:

Originally Posted by SCOTI

Why is there a need to post pics in someone elses thread when it isn't thread related??

I agree.

**superflysteiny** · 05-16-2011, 10:58 AM

Quote:

Originally Posted by SCOTI

Why is there a need to post pics in someone elses thread when it isn't thread related??

Lee is a good guy with a super sick truck. I was in the process of buying his truck when my family needed some help so I backed out and decided to build a truck similar to his. He is a good builder and was most likly trying to show me a pic of his truck to show me what I missed. No big deal. Hope all is well for Lee still love the truck.

**superflysteiny** · 05-16-2011, 11:14 AM

Her are some update pics. I will have the truck running in the next 2 days

**kev2809** · 05-16-2011, 11:42 AM

nice!!

belowme51 · 05-16-2011, 11:58 AM

looks great brother!

**kev2809** · 05-16-2011, 12:17 PM

Quote:

Originally Posted by superflysteiny

Lee is a good guy with a super sick truck. I was in the process of buying his truck when my family needed some help so I backed out and decided to build a truck similar to his. He is a good builder and was most likly trying to show me a pic of his truck to show me what I missed. No big deal. Hope all is well for Lee still love the truck.

and ive seen that white and blue truck in person at heat wave last year in houston. sick truck..took a few pics for myself

**superflysteiny** · 05-16-2011, 12:36 PM

Quote:

Originally Posted by kev2809

and ive seen that white and blue truck in person at heat wave last year in houston. sick truck..took a few pics for myself

super nice truck

thor · 05-16-2011, 01:00 PM

Whoa! Had no idea that Vintage Air HVAC unit took up the whole glove box. No room for gloves now.

I love that satin steering column. Beauty!

**superflysteiny** · 05-16-2011, 02:38 PM

Quote:

Originally Posted by thor

Whoa! Had no idea that Vintage Air HVAC unit took up the whole glove box. No room for gloves now.

I love that satin steering column. Beauty!

only place for it if you dont want it hanging down below the dash. As far as the steering column goes it will be painted red to match the rest of the interior

05-10-2011, 12:01 PM	#826
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build Little update i put the ac in the cab last night got it mounted and I mounted the trans cooler under the passanger side of the cab. I will get some pictures tonight and put them up tomorrow. Thanks Eric __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

05-10-2011, 03:21 PM	#827
thor Registered User Join Date: Apr 2008 Location: Redmond, WA Posts: 679	Re: Pops 72 cheyenne dropmember build was the vintage air easy to install? how long did it take? __________________ 1972 Chevy Blazer CST.....Project: Polished Turd

05-10-2011, 03:38 PM	#828
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: Pops 72 cheyenne dropmember build okay so how would you take the bed off then if you ever had to? pictures at all? sorry for buggin man __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

05-10-2011, 05:22 PM	#829
GVizzle Registered User Join Date: Oct 2008 Location: San Clemente, CA Posts: 405	Re: Pops 72 cheyenne dropmember build When you get this truck done can you make a video of it rollin....I want to see this thing in action!!!!

05-11-2011, 08:43 PM	#835
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: Pops 72 cheyenne dropmember build ok i now understand so the bed is basically studed that is also a good idea. Thanks __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

05-12-2011, 09:07 PM	#837
big c10 Registered User Join Date: Apr 2009 Location: humble tx Posts: 62	Re: Pops 72 cheyenne dropmember build <a href="http://s285.photobucket.com/albums/ll63/PHONGMAN/?action=view&current=1162520332_oJm3H-L.jpg" target="_blank"><img src="http://i285.photobucket.com/albums/ll63/PHONGMAN/1162520332_oJm3H-L.jpg" border="0" alt="Photobucket"></a> Last edited by big c10; 05-12-2011 at 09:11 PM. Reason: ops

05-13-2011, 10:32 PM	#839
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,031	Re: Pops 72 cheyenne dropmember build Why is there a need to post pics in someone elses thread when it isn't thread related?? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

05-13-2011, 10:57 PM	#841
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Pops 72 cheyenne dropmember build man this is a sick build! looking nice as always man...you do some good work __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-16-2011, 11:14 AM	#844
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build Her are some update pics. I will have the truck running in the next 2 days __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

05-16-2011, 11:42 AM	#845
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Pops 72 cheyenne dropmember build nice!! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-16-2011, 11:58 AM	#846
belowme51 Registered User Join Date: Mar 2010 Location: roanoke va Posts: 582	Re: Pops 72 cheyenne dropmember build looks great brother!

05-16-2011, 01:00 PM	#849
thor Registered User Join Date: Apr 2008 Location: Redmond, WA Posts: 679	Re: Pops 72 cheyenne dropmember build Whoa! Had no idea that Vintage Air HVAC unit took up the whole glove box. No room for gloves now. I love that satin steering column. Beauty! __________________ 1972 Chevy Blazer CST.....Project: Polished Turd



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.