Its Mine the World Famous 67 Dragtruck - Page 34 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drag_72 · 10-25-2010, 07:14 PM

wheres the pics??? im curious to see what the 10.5ws on the wider wheel. im thinkin of that combo also

djracer · 10-26-2010, 07:37 AM

I took pics but I can't find them. I will take some more. I want to go stick them under the truck just to see what will fit.

On another note My engine builder is finally working on my 548!

noonzor · 10-26-2010, 02:26 PM

excellent news indeed!! cant wait to see this thing up and runnin again!

bravo · 11-19-2010, 11:39 AM

Any pics???????

djracer · 01-03-2011, 12:07 AM

A few pics of my motor. Still gonna be a long time but its progress.

bigboybodry · 01-13-2011, 01:50 AM

Quote:

Originally Posted by djracer

A few pics of my motor. Still gonna be a long time but its progress.

I feel your pain dj!!!!! the engine looks great! good luck on your build brother.

GMR-PERFORMANCE · 01-17-2011, 11:51 AM

well here is a engine that a buddy of mine has in a sand rail ... yea the term off the hook does not even come close. This engine will push you well past the 9 sec level.. on 6 cylinders LOL ... if you want they have a 942 version as well

http://www.steveschmidtracing.com/dr...92-intimidator

wutnxt · 03-04-2011, 05:46 PM

Nice looking Engine....just found your thread good work

djracer · 03-04-2011, 09:25 PM

Quote:

Originally Posted by GMR-PERFORMANCE

well here is a engine that a buddy of mine has in a sand rail ... yea the term off the hook does not even come close. This engine will push you well past the 9 sec level.. on 6 cylinders LOL ... if you want they have a 942 version as well

http://www.steveschmidtracing.com/dr...92-intimidator

If you will buy it I will put it in there and run it! LOL

djracer · 03-04-2011, 09:27 PM

Quote:

Originally Posted by wutnxt

Nice looking Engine....just found your thread good work

Thanks I can't wait to post some more progress.

noonzor · 04-25-2011, 06:05 PM

last post 03/04/2011..... whats new kev? haha

djracer · 05-22-2011, 12:34 PM

Trying to figure out how i want to spend Pass Time's Money!!!!!!!!!!!!!!!!!
Getting a quote on an all black paint job? This will probably be my fist move.

watahyahknow · 05-22-2011, 07:21 PM

the colour on youre avatar actually starting to grow on me , maybe you could do a gunmetal grey metallic instead of a straight black

djracer · 05-22-2011, 10:42 PM

The first dragtruck I ever saw that made me want a 67-72 chevy dragtruck was black and I have gotta go black. I may add graphics later.

djracer · 06-07-2011, 11:13 PM

I am trying to get my truck to the chassis shop for a few minor things before going to the paint shop. Keep your fingers crossed for me.

kpeztruck · 06-08-2011, 08:11 AM

Quote:

Originally Posted by djracer

I am trying to get my truck to the chassis shop for a few minor things before going to the paint shop. Keep your fingers crossed for me.

Chassis Shop. Paint Shop. Say it ain't so.........I can't wait to see it at the track again. Just got all my front suspension back in mine last night. I have to swap out converters, and finish some rear suspension changes, then off to test!! Paul Baxter

softballnrd27 · 06-08-2011, 01:09 PM

I figured I would post this over here instead in the tire thread, but your truck is one of the ones I draw inspiration from(no homo). Your pass time run was awesome. There are alot of fast trucks on here and yours got me hooked to really make mine fast(er). That and wanting beat a friend's Malibu, bc he constantly talks $*&^ and i would love to beat him just once!! He is running 11.3 on 100-shot and he has a 150 pill he has yet to try out. His car is sweet as hell though 79 nice 454 w/tremec 5spd and 9". His car is a blast to drive!!

djracer · 06-09-2011, 07:57 AM

Quote:

Originally Posted by kpeztruck

Chassis Shop. Paint Shop. Say it ain't so.........I can't wait to see it at the track again. Just got all my front suspension back in mine last night. I have to swap out converters, and finish some rear suspension changes, then off to test!! Paul Baxter

Sweet. We will have similar combos so we will have to compare notes. I'm just a little scared of the little tire you are gonna run. I know it can be done I'm just not that good on the chassis stuff.

djracer · 06-09-2011, 07:59 AM

Quote:

Originally Posted by softballnrd27

I figured I would post this over here instead in the tire thread, but your truck is one of the ones I draw inspiration from(no homo). Your pass time run was awesome. There are alot of fast trucks on here and yours got me hooked to really make mine fast(er). That and wanting beat a friend's Malibu, bc he constantly talks $*&^ and i would love to beat him just once!! He is running 11.3 on 100-shot and he has a 150 pill he has yet to try out. His car is sweet as hell though 79 nice 454 w/tremec 5spd and 9". His car is a blast to drive!!

I don't know much about your combo but pm me what you are running and i'll see if I can help.

djracer · 07-06-2011, 09:15 AM

I got the truck back to a rolling state last night and I should get it to the Chassis Shop this weekend. I am gonna pick up my convertor this weekend and I hope to start putting the motor in Cades Truck if all goes well.

kpeztruck · 07-06-2011, 07:17 PM

Quote:

Originally Posted by djracer

Sweet. We will have similar combos so we will have to compare notes. I'm just a little scared of the little tire you are gonna run. I know it can be done I'm just not that good on the chassis stuff.

The little tire stuff is what I learned on. I actually have a problem getting too agressive on the big tires with chassis set up, and run the tire over. Then I gotta back off, and lighten the hit a little. The Monte Carlo will go out past 330' still riding the wheelie bars on both systems as it sits now. It happened in Montgomery last year when I screwed up bracket racing. I hope to get it all lined out soon, then maybe we can match race!! Paul

djracer · 07-13-2011, 11:50 PM

New Anti Roll Bar!

softballnrd27 · 07-14-2011, 01:39 PM

Where did you get that one? I was thinking of adding one of the splined ones from S&W

watahyahknow · 07-14-2011, 04:37 PM

seem a nice simple one a while back it was just a piece of roundbar in a piece of pipe that had mounting points for the frame
the roundbar has 2 flanges welded on the ends he just mounted another flange to that with bolts that had another piece of roundbar mounted on it sideways

the downmount to the rearaxle could slide over that piece of roundbar before clamping it down wish gave you unlimited options for sensitivity

its verry simple to put together needs verry little room between the chassis and the tire and most of the parts can be bought at a diy store or autostore

djracer · 07-14-2011, 09:27 PM

This one came from applied racing or ART. It is there middle one. It is actually pretty simple. You mount the tabs that hold the bearing blocks then slide the round stock in and weld your to it. It should be pretty light and pretty strong. I looked at the S&W piece also but their was more to the install and it was more expensive.

I got a box in today from S&W also. Pics to come a little later.

10-25-2010, 07:14 PM	#826
drag_72 Ready to go fast!! Join Date: Aug 2008 Location: Carthage,Mo Posts: 219	Re: Its Mine the World Famous 67 Dragtruck wheres the pics??? im curious to see what the 10.5ws on the wider wheel. im thinkin of that combo also __________________ 454 block .30 forged aluminum pistons steel crank valve job Holley Strip Dominator intake 1030cfm holley carb, 250 plate shot roller rockers Erson Solid cam split duration 307/310. .575/.595 lift milodon oil pan fab. aluminum valve covers 4 bolt main splayed anodized caps all studded

10-26-2010, 07:37 AM	#827
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck I took pics but I can't find them. I will take some more. I want to go stick them under the truck just to see what will fit. On another note My engine builder is finally working on my 548! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-26-2010, 02:26 PM	#828
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: Its Mine the World Famous 67 Dragtruck excellent news indeed!! cant wait to see this thing up and runnin again! __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

11-19-2010, 11:39 AM	#829
bravo Registered User Join Date: Mar 2009 Location: odessa,texas Posts: 26	Re: Its Mine the World Famous 67 Dragtruck Any pics???????

01-03-2011, 12:07 AM	#830
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck A few pics of my motor. Still gonna be a long time but its progress. Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

01-17-2011, 11:51 AM	#832
GMR-PERFORMANCE Registered User Join Date: Aug 2010 Location: Keller TX Posts: 836	Re: Its Mine the World Famous 67 Dragtruck well here is a engine that a buddy of mine has in a sand rail ... yea the term off the hook does not even come close. This engine will push you well past the 9 sec level.. on 6 cylinders LOL ... if you want they have a 942 version as well http://www.steveschmidtracing.com/dr...92-intimidator Last edited by GMR-PERFORMANCE; 01-17-2011 at 11:52 AM.

03-04-2011, 05:46 PM	#833
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: Its Mine the World Famous 67 Dragtruck Nice looking Engine....just found your thread good work __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details

04-25-2011, 06:05 PM	#836
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: Its Mine the World Famous 67 Dragtruck last post 03/04/2011..... whats new kev? haha __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

05-22-2011, 12:34 PM	#837
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck Trying to figure out how i want to spend Pass Time's Money!!!!!!!!!!!!!!!!! Getting a quote on an all black paint job? This will probably be my fist move. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

05-22-2011, 07:21 PM	#838
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Its Mine the World Famous 67 Dragtruck the colour on youre avatar actually starting to grow on me , maybe you could do a gunmetal grey metallic instead of a straight black __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

05-22-2011, 10:42 PM	#839
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck The first dragtruck I ever saw that made me want a 67-72 chevy dragtruck was black and I have gotta go black. I may add graphics later. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

06-07-2011, 11:13 PM	#840
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck I am trying to get my truck to the chassis shop for a few minor things before going to the paint shop. Keep your fingers crossed for me. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

06-08-2011, 01:09 PM	#842
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: Its Mine the World Famous 67 Dragtruck I figured I would post this over here instead in the tire thread, but your truck is one of the ones I draw inspiration from(no homo). Your pass time run was awesome. There are alot of fast trucks on here and yours got me hooked to really make mine fast(er). That and wanting beat a friend's Malibu, bc he constantly talks $*&^ and i would love to beat him just once!! He is running 11.3 on 100-shot and he has a 150 pill he has yet to try out. His car is sweet as hell though 79 nice 454 w/tremec 5spd and 9". His car is a blast to drive!! __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168

07-06-2011, 09:15 AM	#845
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck I got the truck back to a rolling state last night and I should get it to the Chassis Shop this weekend. I am gonna pick up my convertor this weekend and I hope to start putting the motor in Cades Truck if all goes well. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-13-2011, 11:50 PM	#847
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck New Anti Roll Bar! Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.

07-14-2011, 01:39 PM	#848
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: Its Mine the World Famous 67 Dragtruck Where did you get that one? I was thinking of adding one of the splined ones from S&W __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168

07-14-2011, 04:37 PM	#849
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Its Mine the World Famous 67 Dragtruck seem a nice simple one a while back it was just a piece of roundbar in a piece of pipe that had mounting points for the frame the roundbar has 2 flanges welded on the ends he just mounted another flange to that with bolts that had another piece of roundbar mounted on it sideways the downmount to the rearaxle could slide over that piece of roundbar before clamping it down wish gave you unlimited options for sensitivity its verry simple to put together needs verry little room between the chassis and the tire and most of the parts can be bought at a diy store or autostore __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

07-14-2011, 09:27 PM	#850
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck This one came from applied racing or ART. It is there middle one. It is actually pretty simple. You mount the tabs that hold the bearing blocks then slide the round stock in and weld your to it. It should be pretty light and pretty strong. I looked at the S&W piece also but their was more to the install and it was more expensive. I got a box in today from S&W also. Pics to come a little later. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Register or Log In To remove these advertisements.