68 S/C update..... - Page 34 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 03-09-2013, 04:09 PM

Quote:

Originally Posted by 72k5zl1

heres some shots of my junkyard motor cleaned up. 5.3 iron block, takeoff ls2 intake and rails, and some valve covers and coil relocators. paint and cleaner goes along way. the holley brackets are user friendly and super clean. they look the way gm should have done it. i reused the alt. bought a ps pump and the vintage air 508 bolted right in. this thing started out as a high intake truck motor.

That looks sweet! Do you think it will work with my TVS 1900 Magnacharger?
Posted via Mobile Device

**72k5zl1** · 03-09-2013, 04:12 PM

??? the bracket kits are the same for all 5 water pumps or the 3 different offsets. there are a 1,2,or3 spacer kits depending on your set up. i would call there tech dept. they were super helpful when i called.

**Hart_Rod** · 03-12-2013, 10:30 PM

Still pulling parts off and cleaning stuff up!! I pulled the inner and outer heater box off today. I found some nice shiny gold paint underneath. I wish I could figure out a way to get the spray on black paint off without messing up the gold paint underneath. I tried some acetone, but that didn't work to well. If I can't figure it out, I'll just shoot some more black semi-gloss on it. I also mounted the new Dakota digital gauges. I think they are going to fit right in with the mostly stock interior.....

C10_ustacould · 03-12-2013, 10:34 PM

Looking good brother... diggin' the gauges!

Zoomin · 03-12-2013, 11:34 PM

The gauges look great! How does the speedo hook up?

**Hart_Rod** · 03-13-2013, 08:37 AM

Quote:

Originally Posted by BucksSS

Looking good brother... diggin' the gauges!

Thanks Ernie. I'm taking my time and doing a lot of planning so hopefully it will go back together as nice as it was before I tore it apart...

.

Quote:

Originally Posted by Zoomin

The gauges look great! How does the speedo hook up?

Thanks. It connects to an output wire out of the computer.

67_ShortFleet · 03-13-2013, 08:43 AM

Did you try laquer thinner on the firewall? I've had luck removing unwanted paint myself with it.

**Hart_Rod** · 03-13-2013, 09:28 AM

Quote:

Originally Posted by 67_ShortFleet

Did you try laquer thinner on the firewall? I've had luck removing unwanted paint myself with it.

Do you think it will hurt the original paint underneath?

67_ShortFleet · 03-13-2013, 09:46 AM

Quote:

Originally Posted by Hart_Rod

Do you think it will hurt the original paint underneath?

It might. but you could just shoot black over it if it does.

DesertCat · 03-13-2013, 09:47 PM

Quote:

Originally Posted by Hart_Rod

Do you think it will hurt the original paint underneath?

It probably won't, the original finish is really hard but keep in mind it probably wasn't exactly cherry when the PO "improved" it.

Just wet a rag and let it do the work, it will come off if it's just rattle can.

Please remember to wear gloves!

**Hart_Rod** · 03-27-2013, 10:29 PM

Out with the "old" and in with the new!!!

Zoomin · 03-27-2013, 10:59 PM

Very nice, but why?!?

Obviously for adjustment, but what problem did you have that made this necessary? Just curious.

HotRod C/10 · 03-27-2013, 11:11 PM

is the "old" up for grabs?

HotRod C/10 · 03-27-2013, 11:22 PM

Quote:

Originally Posted by Hart_Rod

Still pulling parts off and cleaning stuff up!! I pulled the inner and outer heater box off today. I found some nice shiny gold paint underneath. I wish I could figure out a way to get the spray on black paint off without messing up the gold paint underneath. I tried some acetone, but that didn't work to well. If I can't figure it out, I'll just shoot some more black semi-gloss on it. I also mounted the new Dakota digital gauges. I think they are going to fit right in with the mostly stock interior.....

color sand it off with 1500 grit wet and a 3M pad.......it works wonders....but you gotta be patient....1500 removes material so slow!

HotRod C/10 · 03-27-2013, 11:23 PM

Quote:

Originally Posted by Hart_Rod

Do you think it will hurt the original paint underneath?

yes it will.

**Hart_Rod** · 03-28-2013, 08:54 AM

Quote:

Originally Posted by Zoomin

Very nice, but why?!?

Obviously for adjustment, but what problem did you have that made this necessary? Just curious.

No major reason other than I had it laying around,

. I do like the ability to be able to adjust the wheels in the wheel opening and the ability to change the pinion angle. Also, it will match all the other tubular stuff I installed a while back...

.

Quote:

Originally Posted by HotRod C/10

is the "old" up for grabs?

I sold it about 4 months ago and the new owner has been patiently waiting for me to pull it....

.

Quote:

Originally Posted by HotRod C/10

color sand it off with 1500 grit wet and a 3M pad.......it works wonders....but you gotta be patient....1500 removes material so slow!

I played around with it and I'm pretty sure I'm just going to reshoot in in semi-gloss black,

.

Rusbuilt · 03-28-2013, 10:38 AM

Looking good Rob!

Zoomin · 03-28-2013, 10:41 AM

Quote:

Originally Posted by Hart_Rod

No major reason other than I had it laying around,

. I do like the ability to be able to adjust the wheels in the wheel opening and the ability to change the pinion angle. Also, it will match all the other tubular stuff I installed a while back...

.

Works for me!

**Hart_Rod** · 03-29-2013, 03:04 PM

Quote:

Originally Posted by Rusbuilt

Looking good Rob!

Thanks Rus.

Quote:

Originally Posted by Zoomin

Works for me!

:LOL:

Break Break

Here are the specs for my Cam:

http://www.summitracing.com/parts/cca-54-45311

I'll also be upgrading to dual valve springs, hardened pushrods and a trunion upgrade for the rocker arms (as well as deleting the AFM and VVT,

).

UPC: 036584213741 Cam Style: Hydraulic roller tappet Basic Operating RPM Range: 1,500-6,700 Intake Duration at 050 inch Lift: 219 Exhaust Duration at 050 inch Lift: 235 Duration at 050 inch Lift: 219 int./235 exh. Advertised Intake Duration: 269 Advertised Exhaust Duration: 285 Advertised Duration: 269 int./285 exh. Intake Valve Lift with Factory Rocker Arm Ratio: 0.607 in. Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.621 in. Valve Lift with Factory Rocker Arm Ratio: 0.607 int./0.621 exh. Lobe Separation (degrees): 113 Camshaft Gear Attachment: 3-bolt Computer-Controlled Compatible: No Grind Number: 269LRR HR13

gringoloco · 03-29-2013, 03:10 PM

219/235?! Wholly lumpy blower cam, Batman! Gonna sound BA. 3" exhaust on this one?

C10_ustacould · 03-29-2013, 03:16 PM

Yeah, forward progress!

Posted via Mobile Device
Posted via Mobile Device

**Hart_Rod** · 03-29-2013, 03:18 PM

Quote:

Originally Posted by gringoloco

219/235?! Wholly lumpy blower cam, Batman! Gonna sound BA. 3" exhaust on this one?

I was told by Comp Cams that it should not be too crazy....I'll probably stick with the 2.5" exhaust, but will still have the 3" electric cutouts,

.

Quote:

Originally Posted by BucksSS

Yeah, forward progress!

Posted via Mobile Device
Posted via Mobile Device

Finally!!! Hope your trip is going well.

C10_ustacould · 03-29-2013, 07:40 PM

Is the blower and the cam swap going to drive a converter change?

**Hart_Rod** · 03-29-2013, 08:14 PM

Quote:

Originally Posted by BucksSS

Is the blower and the cam swap going to drive a converter change?

Brian at Comp Cams said the stock converter should be good.....
Posted via Mobile Device

**screaminchevypickup** · 03-29-2013, 09:08 PM

Use urethane reducer to take the spray paint off..

03-09-2013, 04:12 PM	#827
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,621	Re: 68 S/C update..... ??? the bracket kits are the same for all 5 water pumps or the 3 different offsets. there are a 1,2,or3 spacer kits depending on your set up. i would call there tech dept. they were super helpful when i called. __________________ website https://www.villagegarage.com/ truck guy in the whiskey world https://www.instagram.com/c10glen/?hl=en https://www.hemmings.com/stories/car...e-perfect-day/

03-12-2013, 10:30 PM	#828
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,856	Re: 68 S/C update..... Still pulling parts off and cleaning stuff up!! I pulled the inner and outer heater box off today. I found some nice shiny gold paint underneath. I wish I could figure out a way to get the spray on black paint off without messing up the gold paint underneath. I tried some acetone, but that didn't work to well. If I can't figure it out, I'll just shoot some more black semi-gloss on it. I also mounted the new Dakota digital gauges. I think they are going to fit right in with the mostly stock interior..... Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-12-2013, 10:34 PM	#829
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: 68 S/C update..... Looking good brother... diggin' the gauges! __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

03-12-2013, 11:34 PM	#830
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: 68 S/C update..... The gauges look great! How does the speedo hook up? __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

03-13-2013, 08:43 AM	#832
67_ShortFleet Registered User Join Date: May 2008 Location: Eastern Iowa Posts: 423	Re: 68 S/C update..... Did you try laquer thinner on the firewall? I've had luck removing unwanted paint myself with it. __________________ Matt Garage build http://www.garagejournal.com/forum/s...ead.php?t=6784 My slow but sure truck build http://67-72chevytrucks.com/vboard/s...d.php?t=394924 My philosophy on tires is the same as cigarettes. "smoke them if you got them" HAPPILY DIVORCED!

03-27-2013, 10:29 PM	#836
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,856	Re: 68 S/C update..... Out with the "old" and in with the new!!! Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-27-2013, 10:59 PM	#837
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: 68 S/C update..... Very nice, but why?!? Obviously for adjustment, but what problem did you have that made this necessary? Just curious. __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

03-27-2013, 11:11 PM	#838
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: 68 S/C update..... is the "old" up for grabs? __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

03-28-2013, 10:38 AM	#842
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: 68 S/C update..... Looking good Rob! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

03-29-2013, 03:10 PM	#845
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 68 S/C update..... 219/235?! Wholly lumpy blower cam, Batman! Gonna sound BA. 3" exhaust on this one? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

03-29-2013, 03:16 PM	#846
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: 68 S/C update..... Yeah, forward progress! Posted via Mobile Device Posted via Mobile Device __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

03-29-2013, 07:40 PM	#848
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: 68 S/C update..... Is the blower and the cam swap going to drive a converter change? __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

03-29-2013, 09:08 PM	#850
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: 68 S/C update..... Use urethane reducer to take the spray paint off.. __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.