What did you do to your Blazer/Jimmy today? - Page 34 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**SoCoC10** · 05-31-2019, 06:24 PM

Vinyl wrapped the door panel inserts.

dirish · 05-31-2019, 06:47 PM

Quote:

Originally Posted by SoCoC10

Vinyl wrapped the door panel inserts.

Those look great!

**Ol Blue K20** · 05-31-2019, 07:50 PM

Quote:

Originally Posted by dirish

Those look great!

X2!!! They look great. Did you take pics of the process?

**SoCoC10** · 05-31-2019, 08:25 PM

Not complicated at all. Just used a prepsol to clean the inserts. Back of the vinyl has grids to make measuring easier. Cut to length and width. Removed the top 1 1/2 of the backer and attached all the way across the top. Then worked the vinyl from the larger area to the smaller area. Used a firm squeege to get air bubble out as you move along. Make sure the vinyl is tight against both sides of the raised perimeter detail and use a brand new razor blade to cut the vinyl off the top of the detail. Use the center of the razor blade and hold almost horizontally. I did each of the six perimeter sections one at a time. Making sure the vinyl was attached well and used 3-4 razor blades.

**DeadheadNM** · 05-31-2019, 09:26 PM

Damn fine work! I appoint you the new Cheyenne Superman - how much for a set of panel inserts?

simicrintz · 05-31-2019, 09:38 PM

Awesome work!!! Man-I really want a center console like that; bet they're rare as hens teeth, huh?

**SoCoC10** · 06-03-2019, 06:07 PM

Quote:

Originally Posted by simicrintz

Awesome work!!! Man-I really want a center console like that; bet they're rare as hens teeth, huh?

Not really. They are out there. Check your local K5 Facebook pages or marketplace. I had an extra one just sold to a member here.

Got some satin black on all the seat brackets and air cleaner assembly. Would have more pictures but had to pack up early because of another thunderstorm.

**1rippen6** · 06-03-2019, 06:30 PM

Quote:

Originally Posted by SoCoC10

Not complicated at all. Just used a prepsol to clean the inserts. Back of the vinyl has grids to make measuring easier. Cut to length and width. Removed the top 1 1/2 of the backer and attached all the way across the top. Then worked the vinyl from the larger area to the smaller area. Used a firm squeege to get air bubble out as you move along. Make sure the vinyl is tight against both sides of the raised perimeter detail and use a brand new razor blade to cut the vinyl off the top of the detail. Use the center of the razor blade and hold almost horizontally. I did each of the six perimeter sections one at a time. Making sure the vinyl was attached well and used 3-4 razor blades.

Where did you get the vinyl? Thanks

simicrintz · 06-03-2019, 10:02 PM

Thank you, SoCoC10! What type of dough should I expect to shell out (don't want to hijack the thread-can PM if preferred).

**SoCoC10** · 06-04-2019, 07:52 PM

Here's a screenshot of the vinyl I used. Took a month to get it.

simicrintz I PMed you

**1rippen6** · 06-04-2019, 08:05 PM

Cool, thanks

DemkoG · 06-05-2019, 11:58 AM

3M di noc is what I used on my wagoneer worked out very well
https://www.amazon.com/s?k=3m+di-noc...l_6evfwr4oxw_e

it is rated for marine use so good in the sun and water uv.

**SoCoC10** · 06-06-2019, 08:53 PM

Getting closer

**DeadheadNM** · 06-06-2019, 09:52 PM

Did you remember to install those foam thingys between the cowl and upper fender?

**DeadheadNM** · 06-08-2019, 02:16 PM

Had a 71-72 GM accessory cruise master cruise control installed. See the button under the dash.

litebulblsc · 06-08-2019, 08:30 PM

Welded lower shock mounts on my 14BFF and finished cleaning and painting the rear frame while it's exposed

**SoCoC10** · 06-11-2019, 09:26 AM

Quote:

Originally Posted by DeadheadNM

Had a 71-72 GM accessory cruise master cruise control installed. See the button under the dash.

That's awesome! Time to pack it up, put it to the test and get it out on the road!

**SoCoC10** · 06-11-2019, 09:28 AM

Wipers, wiper arms, antennae, grill assembly and front bump installed.

**Austinjay** · 06-11-2019, 09:32 AM

Quote:

Originally Posted by SoCoC10

Wipers, wiper arms, antennae, grill assembly and front bump installed.

That blazer looks amazing. You're doing a fantastic job!

**Ol Blue K20** · 06-11-2019, 11:40 AM

Quote:

Originally Posted by DeadheadNM

Had a 71-72 GM accessory cruise master cruise control installed. See the button under the dash.

Have tried it yet. That's cool

**Ol Blue K20** · 06-11-2019, 11:41 AM

Quote:

Originally Posted by SoCoC10

Wipers, wiper arms, antennae, grill assembly and front bump installed.

Looking great!

**SoCoC10** · 06-12-2019, 09:43 PM

Thanks guys! Butt-oning things up. Installed the gravel guards, bumper brackets, license plate bracket and rear bumper.

**Ol Blue K20** · 06-12-2019, 09:55 PM

Quote:

Originally Posted by SoCoC10

Thanks guys! Butt-oning things up. Installed the gravel guards, bumper brackets, license plate bracket and rear bumper.

Looking great....

**DeadheadNM** · 06-13-2019, 11:09 PM

Quote:

Originally Posted by Ol Blue K20

Have tried it yet. That's cool

Sorry Dale I missed this. Not yet. Still at the shop getting a few other tweaks like an odometer swap, choke adjust, and slider windows: http://www.musclecarrestorations.com...Blazer-72-001/

**IronCanine** · 06-13-2019, 11:38 PM

Quote:

Originally Posted by SoCoC10

...Butt-oning things up. Installed the gravel guards, bumper brackets, license plate bracket and rear bumper.

Troy- Blazer looks fantastic. Great job.

Quote:

Originally Posted by DeadheadNM

...at the shop getting a few other tweaks like an odometer swap, choke adjust, and slider windows: http://www.musclecarrestorations.com...Blazer-72-001/

Pete...sliders look outstanding. Died when I saw the antenna ball in the first pic.

05-31-2019, 06:24 PM	#826
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,303	Re: What did you do to your Blazer/Jimmy today? Vinyl wrapped the door panel inserts. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

05-31-2019, 08:25 PM	#829
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,303	Re: What did you do to your Blazer/Jimmy today? Not complicated at all. Just used a prepsol to clean the inserts. Back of the vinyl has grids to make measuring easier. Cut to length and width. Removed the top 1 1/2 of the backer and attached all the way across the top. Then worked the vinyl from the larger area to the smaller area. Used a firm squeege to get air bubble out as you move along. Make sure the vinyl is tight against both sides of the raised perimeter detail and use a brand new razor blade to cut the vinyl off the top of the detail. Use the center of the razor blade and hold almost horizontally. I did each of the six perimeter sections one at a time. Making sure the vinyl was attached well and used 3-4 razor blades. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

05-31-2019, 09:26 PM	#830
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,422	Re: What did you do to your Blazer/Jimmy today? Damn fine work! I appoint you the new Cheyenne Superman - how much for a set of panel inserts? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

05-31-2019, 09:38 PM	#831
simicrintz Registered User Join Date: Dec 2017 Location: Escondido Posts: 305	Re: What did you do to your Blazer/Jimmy today? Awesome work!!! Man-I really want a center console like that; bet they're rare as hens teeth, huh? __________________ -Bruce 1971 K5 Blazer 4WD

06-03-2019, 10:02 PM	#834
simicrintz Registered User Join Date: Dec 2017 Location: Escondido Posts: 305	Re: What did you do to your Blazer/Jimmy today? Thank you, SoCoC10! What type of dough should I expect to shell out (don't want to hijack the thread-can PM if preferred). __________________ -Bruce 1971 K5 Blazer 4WD

06-04-2019, 07:52 PM	#835
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,303	Re: What did you do to your Blazer/Jimmy today? Here's a screenshot of the vinyl I used. Took a month to get it. simicrintz I PMed you Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

06-04-2019, 08:05 PM	#836
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,782	Re: What did you do to your Blazer/Jimmy today? Cool, thanks

06-05-2019, 11:58 AM	#837
DemkoG Registered User Join Date: Nov 2013 Location: Suffield CT Posts: 55	Re: What did you do to your Blazer/Jimmy today? 3M di noc is what I used on my wagoneer worked out very well https://www.amazon.com/s?k=3m+di-noc...l_6evfwr4oxw_e it is rated for marine use so good in the sun and water uv.

06-06-2019, 08:53 PM	#838
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,303	Re: What did you do to your Blazer/Jimmy today? Getting closer Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

06-06-2019, 09:52 PM	#839
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,422	Re: What did you do to your Blazer/Jimmy today? Did you remember to install those foam thingys between the cowl and upper fender? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

06-08-2019, 02:16 PM	#840
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,422	Re: What did you do to your Blazer/Jimmy today? Had a 71-72 GM accessory cruise master cruise control installed. See the button under the dash. Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

06-08-2019, 08:30 PM	#841
litebulblsc Registered User Join Date: Aug 2006 Location: LaSalle Mi Posts: 520	Re: What did you do to your Blazer/Jimmy today? Welded lower shock mounts on my 14BFF and finished cleaning and painting the rear frame while it's exposed Attached Images

06-11-2019, 09:28 AM	#843
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,303	Re: What did you do to your Blazer/Jimmy today? Wipers, wiper arms, antennae, grill assembly and front bump installed. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

06-12-2019, 09:43 PM	#847
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,303	Re: What did you do to your Blazer/Jimmy today? Thanks guys! Butt-oning things up. Installed the gravel guards, bumper brackets, license plate bracket and rear bumper. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.