How about some pics of '73-'87 Short Beds - Page 34 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 08-03-2008, 01:07 PM

Quote:

Originally Posted by spr85gmc

i need to get on that tomorrow i just put the bumper on a few days ago so yes add that to my list either that or put the roll pan back on.

Nix the roll pan. The sport bumpers look sweet on GM trucks.

f.monroe · 08-03-2008, 01:27 PM

Hey SPR85GMC , What are the specs on the front wheels and tires ? Backspace and size of the rubber . The 20's look good . I like the dark center wheel on your dark truck .
Frank

spr85gmc · 08-03-2008, 11:20 PM

Quote:

Originally Posted by f.monroe

Hey SPR85GMC , What are the specs on the front wheels and tires ? Backspace and size of the rubber . The 20's look good . I like the dark center wheel on your dark truck .
Frank

wheels are 20x8.5 with a 5.2 back space and a +12 offset for the front and, 22x9 with a 5.5 backspacing and +13 offset for the rear.

255/40VR20 Yokohama Parada Spec-X Blackwall

285/40VR22 XL Yokohama Parada Spec-X Blackwall need a 1/2 or 1in spacer to satisty me when i turn the rear rubs the inner fender

Fer79 · 08-04-2008, 01:53 AM

----- UNDER CONSTRUCTION-----
CHEVY C/10 CUSTOM DELUXE STEPSIDE 1980

MickMc · 08-04-2008, 02:33 AM

Quote:

Originally Posted by MickMc

Well, that is one simple answer.

Thanks

Mick

I was looking (hope ing) for a more complete answer, maybe along the lines of...

we roughed the surface and layed glass mat with three layers of resin, then sanded and filled and sanded and filled...

or

we cleaned the dash and very carefully layed glass cloth over the entire dash with only two coats of resin and very carefully added filler to the craters the used heavy primer to finish out the somooothe look.

Sometimes people will blow you off when you ask a question, maybe the answer is to complicated or maybe they don't want to let their secret out, maybe they didn't do the work, maybe they had a bad day and everyone has asked the same question (ie 'my cousine has one just like that,except...)...

Share and share and share is main focus of this board, if you don't want to share no problem, I wont ask again.

Mick

spr85gmc · 08-04-2008, 04:12 PM

Quote:

Originally Posted by Fer79

----- UNDER CONSTRUCTION-----
CHEVY C/10 CUSTOM DELUXE STEPSIDE 1980

what color is the ss boh trucks look killer

killthewabbit · 08-04-2008, 10:13 PM

They have confederate flag license plates in Mexico?

I guess I shouldn't be surprised, I have a mexican blanket here in TN. Bought it in Mazatlan back in the Navy days.

Nice wheels and stance, spr85gmc

Fer79 · 08-05-2008, 03:29 AM

Quote:

Originally Posted by killthewabbit

They have confederate flag license plates in Mexico?

I guess I shouldn't be surprised, I have a mexican blanket here in TN. Bought it in Mazatlan back in the Navy days.

Nice wheels and stance, spr85gmc

haha yea, I'm on the border with mexico

(piedras negras, coahuila) - texas (eagle pass)

, The truck also is of texas... greetings...

Fer79 · 08-05-2008, 03:31 AM

Quote:

Originally Posted by spr85gmc

what color is the ss boh trucks look killer

thanks, the color is victory red...

Square84 · 08-05-2008, 11:28 AM

Quote:

Originally Posted by killthewabbit

They have confederate flag license plates in Mexico?

I guess I shouldn't be surprised, I have a mexican blanket here in TN. Bought it in Mazatlan back in the Navy days.

Nice wheels and stance, spr85gmc

that is a georgia state flag license plate truck prolly came from there.

Fer79 · 08-05-2008, 11:52 AM

Quote:

Originally Posted by Square84

that is a georgia state flag license plate truck prolly came from there.

I buy the plate on ebay,
http://cgi.ebay.com/ebaymotors/Smoke...spagenameZWD1V

greetings...

killthewabbit · 08-05-2008, 02:50 PM

Oh man, I didn't even realize it was a Smokey and the Bandit thing. Crap, now I have to relinquish my redneck credentials.

Fer79, the truck's stance is great. I have a thing for worn in stepsides as well.

gafiredog · 08-05-2008, 05:02 PM

hey killthewabbit, your gonna make us look bad. ( really, i didn't think about that either, thought fer79 just wanted the stars and bars on his ride.)

Square84 · 08-05-2008, 11:50 PM

Quote:

Originally Posted by Fer79

I buy the plate on ebay,
http://cgi.ebay.com/ebaymotors/Smoke...spagenameZWD1V

greetings...

on ebay they are $15 if you go to state license plates.com they are $6

CUZICAN_RYDA · 08-06-2008, 01:47 AM

Man I can't wait to get started on my truck

Moostifer · 08-06-2008, 05:48 PM

been a while since I've been on here so I thought I'd post a few of my short wide bed

....

killthewabbit · 08-06-2008, 06:15 PM

Stock with a few bolt-ons, huh?

watahyahknow · 08-06-2008, 06:49 PM

i like that gascap i prolly need to do the same as i'm trying to get the dually wheels inside the fleetside bed , i most likely need to raise the floor as whell

Moostifer · 08-07-2008, 02:16 PM

Quote:

Originally Posted by killthewabbit

Stock with a few bolt-ons, huh?

what? it's all bolted together... sorta...

spr85gmc · 08-07-2008, 03:05 PM

looking good i wish i culd bolt on thinks the way you do.. only think i wuld change dropping the front an inch or two more but thats just me..

MickMc · 08-07-2008, 03:19 PM

Quote:

Originally Posted by spr85gmc

looking good i wish i culd bolt on thinks the way you do.. only think i wuld change dropping the front an inch or two more but thats just me..

wow this must be a text message.

Mick

Moostifer · 08-07-2008, 03:23 PM

Quote:

Originally Posted by spr85gmc

looking good i wish i culd bolt on thinks the way you do.. only think i wuld change dropping the front an inch or two more but thats just me..

too high for my taste also...

I put 1ton springs (stiff) with a coil cut off to help with launch control, but since the local track has been sold & is now a trailer park, I don't see any track time at all... so I'm "de-tuning" it a little, and plan on lowering it via dropped spindles...

spr85gmc · 08-07-2008, 04:59 PM

well do it already it will look even tougher than now

cntryboy88 · 08-07-2008, 10:18 PM

Well, here is mine. Still learning this SBC stuff. Been a Mustang nut too long. Any ideas for this one?

toomanytoyz · 08-07-2008, 10:45 PM

Quote:

Originally Posted by cntryboy88

Well, here is mine. Still learning this SBC stuff. Been a Mustang nut too long. Any ideas for this one?

Never too Late to be Converted, I Think your Truck Look's Pretty Good as is, It's Really Clean...........

Might Look Good to lower it a Little, Other than that i would leave as is......

Rick

08-03-2008, 01:27 PM	#827
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: How about some pictures of '73-'87 short beds Hey SPR85GMC , What are the specs on the front wheels and tires ? Backspace and size of the rubber . The 20's look good . I like the dark center wheel on your dark truck . Frank __________________ Born and proudly residing in a Red State !

08-04-2008, 01:53 AM	#829
Fer79 Registered User Join Date: Aug 2008 Location: pIEDRAS NEGRAS, COAHUILA, MEXICO Posts: 242	Re: How about some pictures of '73-'87 short beds ----- UNDER CONSTRUCTION----- CHEVY C/10 CUSTOM DELUXE STEPSIDE 1980 Last edited by Fer79; 08-04-2008 at 01:55 AM.

08-04-2008, 10:13 PM	#832
killthewabbit Spear and magic helmet! Join Date: Oct 2006 Location: Nashville, TN Posts: 1,226	Re: How about some pictures of '73-'87 short beds They have confederate flag license plates in Mexico? I guess I shouldn't be surprised, I have a mexican blanket here in TN. Bought it in Mazatlan back in the Navy days. Nice wheels and stance, spr85gmc __________________ -- Will

08-05-2008, 02:50 PM	#837
killthewabbit Spear and magic helmet! Join Date: Oct 2006 Location: Nashville, TN Posts: 1,226	Re: How about some pictures of '73-'87 short beds Oh man, I didn't even realize it was a Smokey and the Bandit thing. Crap, now I have to relinquish my redneck credentials. Fer79, the truck's stance is great. I have a thing for worn in stepsides as well. __________________ -- Will

08-05-2008, 05:02 PM	#838
gafiredog Registered User Join Date: May 2008 Location: metro Atlanta, Ga. Posts: 196	Re: How about some pictures of '73-'87 short beds hey killthewabbit, your gonna make us look bad. ( really, i didn't think about that either, thought fer79 just wanted the stars and bars on his ride.) __________________ Art 1975 c-10 stepper 1978 single cab dually 1987 crewcab dually 1986 crewcab single wheel 1948 anglia- (the dixie twister super gas)

08-06-2008, 01:47 AM	#840
CUZICAN_RYDA Registered User Join Date: Aug 2008 Location: "The Park", Maryland Posts: 29	Re: How about some pictures of '73-'87 short beds Man I can't wait to get started on my truck __________________ Enigma comin '09 Low-Riders.com

08-06-2008, 05:48 PM	#841
Moostifer a fool with no money Join Date: May 2005 Location: Overton, Tx Posts: 532	Re: How about some pictures of '73-'87 short beds been a while since I've been on here so I thought I'd post a few of my short wide bed .... __________________ Basicly stock 83 SWB with a few Bolt-ons before, during and still during http://photobucket.com/albums/y251/moostifer/truck/ http://photobucket.com/albums/y251/moostifer/motor/

08-06-2008, 06:15 PM	#842
killthewabbit Spear and magic helmet! Join Date: Oct 2006 Location: Nashville, TN Posts: 1,226	Re: How about some pictures of '73-'87 short beds Stock with a few bolt-ons, huh? __________________ -- Will

08-06-2008, 06:49 PM	#843
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: How about some pictures of '73-'87 short beds i like that gascap i prolly need to do the same as i'm trying to get the dually wheels inside the fleetside bed , i most likely need to raise the floor as whell __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

08-07-2008, 03:05 PM	#845
spr85gmc Registered User Join Date: Jul 2007 Location: san antonio Posts: 648	Re: How about some pictures of '73-'87 short beds looking good i wish i culd bolt on thinks the way you do.. only think i wuld change dropping the front an inch or two more but thats just me..

08-07-2008, 04:59 PM	#848
spr85gmc Registered User Join Date: Jul 2007 Location: san antonio Posts: 648	Re: How about some pictures of '73-'87 short beds well do it already it will look even tougher than now

08-07-2008, 10:18 PM	#849
cntryboy88 Registered User Join Date: Jul 2008 Location: Cullman, AL Posts: 28	Re: How about some pictures of '73-'87 short beds Well, here is mine. Still learning this SBC stuff. Been a Mustang nut too long. Any ideas for this one?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.