The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board > 67-72 Chevrolet & GMC Pickups Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-09-2011, 08:38 PM   #851
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,126
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Quote:
Originally Posted by lyrikz View Post
Wait until you bolt your seat down. ahaha That was a pita. looks good.
It wasn't too bad. I watched a video on you tube on how to do it. I just pushed a scribe through the floor holes and through the carpet, used a razor knife to cut small crosses in that spot, and it worked out ok. Only a little harder than without the carpet trying to get the bolt through it all.

I had used a wood block as a spacer for the front inner seat mount for the driver side. I pulled out the plastic trim parts for the seat mounts from when I bought it and found that the cover for that mount was not going to work with a wood block, so I made a nice one.

I started with a piece of tube from a parted out steering column, used my new metal band saw and cut a 1-1/2" piece. Then tack welded a fender washer to one end where it rests on the carpet.


In place...


With the cover...


The other front mounts bolt direct to the floor. The rear mounts have about 1/2" of plastic spacers to level the seat out a bit. It's all bolted in and I even got the passenger side sill plate on. A few more minutes later tonight and I'll get the driver side in. I need to pick out some floor mats yet and get the seat belts, and that will finish the floor.


Once the seat gets recovered to match the rest of the interior I'll spray the mounts turquoise to match the other plastic/vinyl in the cab.

Punch list:
Polish other wheels
heater box
adjust e-brake cable
eustations to match panels
horn
inner fenders (need new nuts, paint bolts)
Cowl shims
Washer pump
finish exhaust
upholstory recovered
alignment

Last edited by hgs_notes; 11-09-2011 at 11:00 PM.
hgs_notes is offline   Reply With Quote
Old 11-09-2011, 10:17 PM   #852
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Looking great!
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Old 11-10-2011, 10:51 AM   #853
lyrikz
PITbut
 
lyrikz's Avatar
 
Join Date: Sep 2007
Location: monroe washington
Posts: 3,052
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Quote:
Originally Posted by hgs_notes View Post
It wasn't too bad. I watched a video on you tube on how to do it. I just pushed a scribe through the floor holes and through the carpet, used a razor knife to cut small crosses in that spot, and it worked out ok. Only a little harder than without the carpet trying to get the bolt through it all.

I had used a wood block as a spacer for the front inner seat mount for the driver side. I pulled out the plastic trim parts for the seat mounts from when I bought it and found that the cover for that mount was not going to work with a wood block, so I made a nice one.

I started with a piece of tube from a parted out steering column, used my new metal band saw and cut a 1-1/2" piece. Then tack welded a fender washer to one end where it rests on the carpet.


In place...


With the cover...


The other front mounts bolt direct to the floor. The rear mounts have about 1/2" of plastic spacers to level the seat out a bit. It's all bolted in and I even got the passenger side sill plate on. A few more minutes later tonight and I'll get the driver side in. I need to pick out some floor mats yet and get the seat belts, and that will finish the floor.


Once the seat gets recovered to match the rest of the interior I'll spray the mounts turquoise to match the other plastic/vinyl in the cab.

Punch list:
Polish other wheels
heater box
adjust e-brake cable
eustations to match panels
horn
inner fenders (need new nuts, paint bolts)
Cowl shims
Washer pump
finish exhaust
upholstory recovered
alignment
Ahh man, thats a brilliant idea. I didnt do that. ahaha.
__________________
New project. 1971 Twin Turbo blazer

http://67-72chevytrucks.com/vboard/s...d.php?t=676047


My new YOUTUBE channel.. Videos of my truck and a current walk around.
Lyrikz74 Youtube channel DONE! SOLD!

My 1971 stepside build thread
My Build Thread UPDATED 6/11. DONE
and sold.
lyrikz is offline   Reply With Quote
Old 11-11-2011, 08:53 PM   #854
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,126
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Went for a ride today with the carpet and extra insulation. Wow, what a difference. The cab is tight enough that having a vent window open a bit helps the doors close. I have a door jamb vent I pulled from another truck and I'm thinking about installing it on the passenger side. Is it worth the effort and the risk I mess the hole up and have to fix a mistake?

The decibal levels are definitely better and it just has a different feel to it compared to the all steel interior top to bottom. I still need to move the mufflers back to under the bed though. I think I'm going to work on getting the heater installed next. Not that I really need it, but it needs to go in before the inner fenders and I want to finish routing the wiring for the EFI, etc.
hgs_notes is offline   Reply With Quote
Old 11-11-2011, 09:00 PM   #855
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Cool, that sounds great! (poor puns intended)
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Old 11-11-2011, 09:02 PM   #856
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,139
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Great work. The new pieces look sweet!
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 11-13-2011, 12:07 PM   #857
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,126
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Got all of the interior soft parts cleaned up and sprayed except the seat bracket covers and dash pad. At least for now the stuff will all match up pretty good. I'm not thrilled with the arm rest and visor color but can get those covered with the seat when that is done. The mirror is in, the rest I'll let cure some and reinstall later today.

The stuff is pretty easy to use. I cleaned everything with soapy water, let dry over night, then cleaned again with my summit wax remover/degreaser just like I was painting a fender. Then just sprayed a couple coats on the parts, with about 10 min between coats. It dries fast and covers well.




hgs_notes is offline   Reply With Quote
Old 11-13-2011, 07:35 PM   #858
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,126
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Got the stuff put back in, except for the door crank eustacions. I think I have to pull the door panels off to install those. And since my brand new driver side door handle busted and needs replaced, I'll be doing that soon enough anyway. I think they look pretty good installed, nice match to the paint.




I took the wife for a ride tonight as the sun was setting. Topped out at 105+ before she said thats enough (it was still climbing), but it's so smooth you feel like you can cruise it right there. She's impressed with how it all feels now with the added insulation and carpet. Still have a few things to work on over the winter, but my list keeps getting shorter. I think I'll do the heater box next so I can get the inner fenders out of the basement.

Last edited by hgs_notes; 11-13-2011 at 07:40 PM.
hgs_notes is offline   Reply With Quote
Old 11-13-2011, 10:14 PM   #859
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Looks great in there!
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Old 11-14-2011, 06:21 AM   #860
Palf70Step
State of Confusion!

 
Palf70Step's Avatar
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,110
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

__________________
Bill
1970 Chevy Custom/10 LWB Fleetside
2010 Toyota Tacoma PreRunner SR5 Double Cab - DD

Member of Louisiana Classic Truck Club (LCTC)

Bill's Gallery
Life isn't tied with a bow, but it's still a gift.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!
Palf70Step is offline   Reply With Quote
Old 11-22-2011, 01:56 PM   #861
BurnoutNova
Registered User
 
BurnoutNova's Avatar
 
Join Date: Mar 2004
Location: CA
Posts: 2,057
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Looking good... almost like the 2wd twin to my truck, I even have the same wheels. What color is that? I painted mine the factory Medium green color, looks very similar in the pics.
BurnoutNova is offline   Reply With Quote
Old 11-22-2011, 02:37 PM   #862
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,126
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Quote:
Originally Posted by BurnoutNova View Post
Looking good... almost like the 2wd twin to my truck, I even have the same wheels. What color is that? I painted mine the factory Medium green color, looks very similar in the pics.
It's a 1969 Turquoise Poly, paint code 511. This was medium green before and if you saw them together it's obvious how different they are. This is more blue than green.

Last edited by hgs_notes; 11-25-2011 at 07:51 PM.
hgs_notes is offline   Reply With Quote
Old 11-25-2011, 08:04 PM   #863
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,126
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Not really a build update, but worth posting. My mom came down for Thanksgiving and it's the first time she got to see my (nearly) finished truck in person. She was amazed and said that my dad would have loved it. He died about 6 years ago and for many years didn't understand my love for his old truck. My mom said that after a while he did come around and thought it was a worthwhile project. He never got to see how it turned out, but a piece of him is in every part of this build. All that I have learned, the roots of my passion for things mechanical began with his influence on me. My life has been built on those beginnings.

Anyway, this morning before she was going to head home, I took her for a ride. She loved it. It's entirely possible that she hadn't been in it since the late 70's. From then on we had a 2nd car and the only time we used the truck was for hauling wood and garbage, etc. By that time I was old enough to help my dad with these chores and she just would not have been in it. She said it brought back a lot of memories and one I had yesterday was of my whole family from back then stuffed into the cab. My parents, me and both sisters, and thought I should try and recreate that.
hgs_notes is offline   Reply With Quote
Old 11-25-2011, 10:27 PM   #864
67cheby
67cheby
 
67cheby's Avatar
 
Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

thats awesome man, congrats on bringing back old/good memories and starting many more new ones !!
67cheby is offline   Reply With Quote
Old 11-25-2011, 10:35 PM   #865
mcbassin
Still Learning
 
mcbassin's Avatar
 
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Super cool story about your Mom and family history. I'm sure you are making your old man proud. your truck just keeps getting nicer.
mcbassin is offline   Reply With Quote
Old 11-25-2011, 10:35 PM   #866
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

very cool story
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Old 11-25-2011, 10:37 PM   #867
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,139
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Wow, those pieces you painted matched pretty nicely. Congrats on the memory lane trip, that is pretty cool!
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 11-25-2011, 11:36 PM   #868
KEH
Better late than never
 
KEH's Avatar
 
Join Date: Dec 2001
Location: Columbus, IN
Posts: 324
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Great job!
Posted via Mobile Device
__________________
1970 C/10 SWB Stepside
KEH is offline   Reply With Quote
Old 11-26-2011, 01:40 PM   #869
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,126
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Thanks for the kind words. On another front, I am a die cast collector of these trucks, and also have a few models. Last winter I built one of them to match what my truck would look like. I had it pretty well wrapped up except the wheels. I had a hell of a time finding 1/24-1/25 scale cyclone/turbo/huricane wheels to match mine. Yesterday I was at a Hobby Lobby store and scanned the pics on the model boxes and found this...



Got the wheels on, but wasn't a direct fit. Different manufacturers of models and different sizes of tires/wheels means I couldn't just slip those wheels into the tires from the original kit. Mounting was different, etc. but I got them on it eventually. I got the grill bowtie painted and installed and also the door mirror. So here is the comparison with a shot of the real truck.

hgs_notes is offline   Reply With Quote
Old 11-26-2011, 03:27 PM   #870
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Great work on the model!!! Now you just need to polish up the rest of the wheels on the real thing
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Old 11-26-2011, 09:38 PM   #871
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,126
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Quote:
Originally Posted by VA72C10 View Post
Great work on the model!!! Now you just need to polish up the rest of the wheels on the real thing
Man, what a ball buster! Where'd your thread disappear to anyway?
hgs_notes is offline   Reply With Quote
Old 11-26-2011, 09:45 PM   #872
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Quote:
Originally Posted by hgs_notes View Post
Man, what a ball buster!


Would you like some cheese with that whine???


Quote:
Originally Posted by hgs_notes View Post
Where'd your thread disappear to anyway?

Ouch! That one hurts!!!

(the truth always hurts the worst)

I have had to switch gears from working on the truck to working on parts to sell to pay the bills. My part time/independent contractor work (main source of income for the last year) has slowed to next to nil with the holidays...combine that with having one of those places owing me $2,400 in commission....and I've been having to provide for the family with the restoration and sale of truck parts.....

I have found some great deals on the last main parts needed for it and have the tailgate for it at the body shop being worked on by someone 10,000 times more qualified than me to work on it
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Old 11-26-2011, 09:49 PM   #873
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

While I'm at it......


When are you going to do the van marker conversion on the model???


__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Old 11-26-2011, 10:40 PM   #874
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,126
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Quote:
Originally Posted by VA72C10 View Post
While I'm at it......


When are you going to do the van marker conversion on the model???


I guess I should have sanded the side molding and emblems off too. I'll need a different tailgate also, and I'll have to find a 99 or so truck model with a split bench, and.. oh hell, it's close enough.
hgs_notes is offline   Reply With Quote
Old 11-26-2011, 10:55 PM   #875
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Quote:
Originally Posted by hgs_notes View Post
I guess I should have sanded the side molding and emblems off too. I'll need a different tailgate also, and I'll have to find a 99 or so truck model with a split bench, and.. oh hell, it's close enough.
I noticed all that too....but wasn't trying to be toooo picky

Both projects turned out great! and I'm sure the blazer is going to be nice as well!
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:37 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com