Do you need '64-'66 Chevy Truck Parts?

[283 Man]

Tony do you have the things I ask for in the post ,noticed you skipped over me bud?

[LILRED66]

Originally Posted by 283 Man

Tony looking for a turn signal canceling cam wires and plastic thing that goes inside the steering wheel 64-66 whats your price on a used one? thanks Morton

Hey Mort. Sorry for skipping over you. I have a few used turn signal assemblies, but they are 40+ years old, so the plastic may be a little brittle. I usually buy new, so I don't have to pull the steering wheel assembly apart, if a used one I installed fails on me.

You can get them from:

www.lmctruck.com
www.classicparts.com
www.bowtiebits.com
www.truckandcarshop.com

[LILRED66]

Originally Posted by 283 Man

Tony how much for insterment dash cluster 64-66 the ones that got genrator light and oil preasure light on front of them? thanks Morton

Hey Mort. I have several nice ones. How about $35.00, including shipping for a nice, clean one?

PS - I received payment for the clock. I will ship it out early next week. Thanks for your business.

[LILRED66]

Originally Posted by DPowers

dwanepowers@att.net

Photo sent, via your e-mail. Please let me know if I can help and thanks for the opportunity.

[Frizzle Fry]

Hey Tony,

Returning customer I need choke and wiper knobs for the 64. Might be interested in a clean radio section for the dash too if you have one. Please PM price/payment details. Thanks!

[LILRED66]

Originally Posted by Frizzle Fry

Hey Tony,

Returning customer I need choke and wiper knobs for the 64. Might be interested in a clean radio section for the dash too if you have one. Please PM price/payment details. Thanks!

Thanks for inquiry. Black or black/chrome choke and wiper knobs?

It may be better to go with the repop dash section, in lieu of cutting up a decent dash, since the radio opening is usually the part that is good or bad.

Let me know your thoughts and I will reply accordingly.

[283 Man]

How much for one of your 64-66 used turnsingal cam thing thats good along with the wiring ?

[198plus]

Hey Tony......Do you still have the 4,5,6 tach cluster with the clock ?????

[BR3W CITY]

Got the sill panels, thanks!

[Frizzle Fry]

Originally Posted by LILRED66

Thanks for inquiry. Black or black/chrome choke and wiper knobs?

It may be better to go with the repop dash section, in lieu of cutting up a decent dash, since the radio opening is usually the part that is good or bad.

Let me know your thoughts and I will reply accordingly.

Didn't think about the repops. Let's just do the knobs then (unless you stock repops).

If I go with chrome I will need the headlight knob to match. Can you give a quote for just the two in black and a second quote all three in chrome?

[LILRED66]

Originally Posted by 283 Man

How much for one of your 64-66 used turnsingal cam thing thats good along with the wiring ?

Hey Morton. I don't have any good 4-5-6 Chevy turn signal assembly/harnesses. The ones I do have, need to work, so you would be better off buying a repop. Plus, the units I have are 40+ years old, just like your's and the plastic is pretty brittle. Sorry I couldn't help you with this item, but I appreciate the opportunity.

[LILRED66]

Originally Posted by 198plus

Hey Tony......Do you still have the 4,5,6 tach cluster with the clock ?????

I received your PM and replied. I do still have it...lots of interest, but no takers yet. Please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

[LILRED66]

Originally Posted by BR3W CITY

Got the sill panels, thanks!

Thanks for your business Jason. I hope they work for you. Please let me know if I can help you with other good, used '60-'66 Chevy/GMC truck parts in the future.

[LILRED66]

Originally Posted by Frizzle Fry

Didn't think about the repops. Let's just do the knobs then (unless you stock repops).

If I go with chrome I will need the headlight knob to match. Can you give a quote for just the two in black and a second quote all three in chrome?

PM sent for black wiper switch & choke knobs, as well as, chrome/black light switch, wiper switch & choke knobs. Thanks for the opportunity.

[ChiefRocka]

Hey Tony....I was wondering if you had a decent horn button/ring for the Custom Cab wheel ??

The one on my 63' is broken.

[LILRED66]

Originally Posted by ChiefRocka

Hey Tony....I was wondering if you had a decent horn button/ring for the Custom Cab wheel ??

The one on my 63' is broken.

Hey John. Good to hear from you. I have been following your new build...Rock-A-Chief on your '63.

I do have a few chrome horn ring assemblies for a '60-'65, as well as, a few for a '66. Are you looking show-quality or driver-quality? I have both, so please let me know your thoughts and thanks for the opportunity.

[jsinor1956]

I do! need two as close to perfecrt doors as I can find. and the same condition divers fender.
jsinor1956@gmail.com
jim Sinor

[lostnthe60s]

Don't forget I am looking for a drivers fender and two doors as well thx

[283 Man]

Tony,looking for a good working 3 speed transmission or 4 speed granny low transmission that the starters bolts to the transmisson instead of engine block,price on one please and i will drive up to pick up if its in my price range.Its for my second 66 project truck this one. thanks Morton

[Frizzle Fry]

Originally Posted by LILRED66

PM sent for black wiper switch & choke knobs, as well as, chrome/black light switch, wiper switch & choke knobs. Thanks for the opportunity.

Received and installed, Thanks!

[reighmey]

I sent you a PM in reference to a right side front fender. Do you have one and how much to include shipping to 31815?

[LILRED66]

Originally Posted by ChiefRocka

Hey Tony....I was wondering if you had a decent horn button/ring for the Custom Cab wheel ??

The one on my 63' is broken.

How does this one look to you?

[LILRED66]

Originally Posted by jsinor1956

I do! need two as close to perfecrt doors as I can find. and the same condition divers fender.
jsinor1956@gmail.com
jim Sinor

Jim:

Thanks for the inquiry. Unfortunately, I don't have any "close to perfect doors and front fenders". I am not sure if these exist and if they do, they are a pretty penny. I do have some good, used door shells and front fenders, as well as, other good, used parts for '60-'66 Chevy/GMC trucks.

Good, used door shells are $175.00, picked up at my shop in Kansas City, KS. I can ship, via UPS-Ground for an additional $60.00.

Good, used front fenders are $175.00, picked up at my shop in Kansas City, KS. I can ship, via UPS-Ground for an additional $45.00.

Thanks for the opportunity and please let me know if I can help you with these items or other good, used '60-'66 Chevy/GMC truck parts in the future.

[LILRED66]

Originally Posted by lostnthe60s

Don't forget I am looking for a drivers fender and two doors as well thx

Thanks for the inquiry. I do have some good, used door shells and front fenders, as well as, other good, used parts for '60-'66 Chevy/GMC trucks.

Good, used door shells are $175.00, picked up at my shop in Kansas City, KS. I can ship, via UPS-Ground for an additional $60.00.

Good, used front fenders are $175.00, picked up at my shop in Kansas City, KS. I can ship, via UPS-Ground for an additional $45.00.

Thanks for the opportunity and please let me know if I can help you with these items or other good, used '60-'66 Chevy/GMC truck parts in the future.

[LILRED66]

Originally Posted by 283 Man

Tony,looking for a good working 3 speed transmission or 4 speed granny low transmission that the starters bolts to the transmisson instead of engine block,price on one please and i will drive up to pick up if its in my price range.Its for my second 66 project truck this one. thanks Morton

Hey Morton. Good to hear from you. I have a few good, used factory SM420 4-speed transmissions, as well as, a few good, used 3-speed manual transmissions available. They go for $125.00 each, picked up at my shop in Kansas City, KS. The starter bolts to the bell housing.