OR 100's of misc parts from the last 6 trucks parted out

[Mapearso]

Originally Posted by tll74

*Back window trim (and rubber 65.00 for nice rubber and nice trim.
*complete shortbed upper & lower trim...just some DQ lwb uppers 20.00ish each
*rear tailgate trim upper, left and right sides....15.00 each
*radio delete plate any color...green in color 45.00 with clips
*T3 headlights...I rat hole these for my own projects.
*Very nice set of outer door handles...50.00ish on my best pair, I need to look at them.
*1 AC vent ball, nice no pitting? Probably have to look. 12.50
All plus shipping

Tom, found a 72 Cheyenne Super in the Junkyard yesterday so I shrunk my list --

Condition of the door handles?
Condition of the taillight trim?
Price for just the rubber for rear window trim? (Do you have just the center clip piece you can sell me?)

Thanks,
Mark

[tll74]

Originally Posted by danny69

You don't happen to have power steering bracket for 307 short water pump. Thanks Danny

68 or 69-72?

Originally Posted by Mapearso

Tom, found a 72 Cheyenne Super in the Junkyard yesterday so I shrunk my list --

Condition of the door handles?
Condition of the taillight trim?
Price for just the rubber for rear window trim? (Do you have just the center clip piece you can sell me?)

Thanks,
Mark

Mark, I'll get some pics for you. 30.00 on a nice rubber and 5.00 for the clip. plus shipping.


Thanks, Tom

[67swb72klb]

interested in a set of OS door handles also
thanks

[danny69]

I need the ps bracket for 69,307 short water pump. Thanks. Danny

[54blackhornet]

Tom, do you have proper fastener for air cleaner on a 350 ? Threaded rod and wing nut ?.... Jack

[danny69]

Tom while I'm at it I'm changing the 69 to power steering would you happen to have the 2 groove drive and power steering pump pulleys along with the ps brackets. Thanks again Danny

[tll74]

Originally Posted by 67swb72klb

interested in a set of OS door handles also
thanks

I didn't get a chance today for pics for Mapearso. I'll post pics of two pairs he will be first on the best pair.

Originally Posted by danny69

I need the ps bracket for 69,307 short water pump. Thanks. Danny

Danny, I have the P/S brackets and pulley but only with a pump. 50.00 for the pump and 22.50 for the 2 groove cast iron crank pulley. Plus shipping

Originally Posted by 54blackhornet

Tom, do you have proper fastener for air cleaner on a 350 ? Threaded rod and wing nut ?.... Jack

Hey Jack, Yeah I have the correct stud and wing nut. 7.50 plus postage of 2.50. Or I could drop them at Brian's again but not sure how soon. I have 6 boxes waiting for me already so hopefully soon.

Thanks, Tom

[danny69]

Do you know if the ps pump is good I'd planed on getting a rebuilt one , also could you get a price on shipping on all to 74801. Thanks Danny

[54blackhornet]

Bring them when you come East . Boxes ! We don't need no stinking boxes !

[markmdz]

Ok, after looking over the truck a little more...

I need a couple preliminary items for my '68 C20 (LWB obviously):
gas pedal (regular, not deluxe)
inner and outer window base 'scraper' trim
taillight harness
heater core housing (just the bucket, not the heater core itself)
black (or grey) seatbelts with floor boots
maybe a turn signal switch or cam (I may buy this new)

[danny69]

Tom just found bracket and pulleys locally so won't be needing them. Thanks for the trouble. Danny

[Barba Negro]

Interested in "2 67-70 throttle mech. w/ 2wd-Q-jet rod 22.50 each". Will this rod work with a 68 K10 w/283 2bbl? Thanks, Kyle

[Ugly 61]

Do you still have the GMC park light looms and the GMC fender eyebrow's?? ugly 61

[tll74]

Originally Posted by Ugly 61

Do you still have the GMC park light looms and the GMC fender eyebrow's?? ugly 61

Yes on the looms. No on the eyebrow's but I have some from more recent trucks. I will need to look at them to see how nice they are to get price.
Thanks, Tom

[tll74]

Originally Posted by 54blackhornet

Bring them when you come East . Boxes ! We don't need no stinking boxes !

Ok will do.

Originally Posted by markmdz

Ok, after looking over the truck a little more...

I need a couple preliminary items for my '68 C20 (LWB obviously):
gas pedal (regular, not deluxe)
inner and outer window base 'scraper' trim
taillight harness
heater core housing (just the bucket, not the heater core itself)
black (or grey) seatbelts with floor boots
maybe a turn signal switch or cam (I may buy this new)

gas pedal (regular, not deluxe)..7.50 12.50 shipped
inner and outer window base 'scraper' trim...maybe it seems that I seen some loose the other day.
taillight harness....from cab to bumper or bumper to lenses?
heater core housing (just the bucket, not the heater core itself)65.00 with nice color and good tins
black (or grey) seatbelts with floor boots... Should have a nice 3 person set of black belts. 125.00
All plus shipping

Originally Posted by Barba Negro

Interested in "2 67-70 throttle mech. w/ 2wd-Q-jet rod 22.50 each". Will this rod work with a 68 K10 w/283 2bbl? Thanks, Kyle

Throttle mech. Yes, rod no. The 4x4's use a shorter rod due to the engine set back.


Thanks, Tom

[Bomp]

I probably missed it but do you have any 3 speed columns? Need one that fits a '69 Thanks

[tll74]

Originally Posted by Bomp

I probably missed it but do you have any 3 speed columns? Need one that fits a '69 Thanks

Sure, It's still in a truck so I would have to pull it and check it out. If it's good 125.00 plus shipping. Thanks, Tom

[Ugly 61]

Tom still interested in parklite looms would also like to know if you have any 1500 super custon or sierra emblems also interested in GMC park lite cans Ugly 61

[ScottieB]

I cannot read 35 pages ... so I'll just ask:

I have a 69 c10 with A/C, 5.7

Do you have a full right to left duct system (hoses, plastic, etc) - don't need the vents themselves. The stuff in my truck is mostly damaged / old and degraded.
I don't mind buying new, but if yours is good quality - I would like it.

I also need a good quality gas pedal ... mine has broken off and it's now a nub.

Do you have any good quality windshield wiper tanks (with pump preferably), and coolant tanks.
Do you have a power steering pump bracket, maybe one that fits headers? (don't need the pump, I have 2 good pumps)
Do you have a Hood Latch pull cord that mounts in cab and goes into engine bay? (I guess from a square body)

I can pay via paypal. Shipped to 76528 (Texas)

[tll74]

Originally Posted by Ugly 61

Tom still interested in parklite looms would also like to know if you have any 1500 super custon or sierra emblems also interested in GMC park lite cans Ugly 61

I might have them. I'll check Monday on all of it.

Originally Posted by ScottieB

I cannot read 35 pages ... so I'll just ask:

I have a 69 c10 with A/C, 5.7

Do you have a full right to left duct system (hoses, plastic, etc) - don't need the vents themselves. The stuff in my truck is mostly damaged / old and degraded.
I don't mind buying new, but if yours is good quality - I would like it.

I also need a good quality gas pedal ... mine has broken off and it's now a nub.

Do you have any good quality windshield wiper tanks (with pump preferably), and coolant tanks.
Do you have a power steering pump bracket, maybe one that fits headers? (don't need the pump, I have 2 good pumps)
Do you have a Hood Latch pull cord that mounts in cab and goes into engine bay? (I guess from a square body)

I can pay via paypal. Shipped to 76528 (Texas)

Do you have a full right to left duct system (hoses, plastic, etc)...Sorry no good ducts.

I also need a good quality gas pedal ... 7.50 for std and 15.00 for a deluxe

Do you have any good quality windshield wiper tanks (with pump preferably), and coolant tanks. 85-up trucks have the pump. 20.00
Do you have a power steering pump bracket, maybe one that fits headers? sorry just just complete pumps.
Do you have a Hood Latch pull cord that mounts in cab and goes into engine bay? (I guess from a square body)Yes 15.00

Plus 15.00 shipping


Thanks, Tom

[ScottieB]

Can you please show me the 2 different gas pedals?
I want the pull cable, does it have the bracket that holds the handle? etc
If the wiper and coolant tanks are for our trucks (brackets too??) and hold liquid, I want them. If they are universal, I do not.
I am looking for the 80s / up horn grounding thing where you push on the horn and it blows. mine doesn't really work right. do you have one of them? The spring moves around and fails to make a ground
Pic of inside of mine: https://dl.dropboxusercontent.com/u/...905_110157.jpg

Do you have the 80's clock for cluster? (just the clock)
Do you have a Tach that works and will fit in the 3 3/8 empty gauge for our 69-72 clusters?

Originally Posted by tll74

I might have them. I'll check Monday on all of it.


Do you have a full right to left duct system (hoses, plastic, etc)...Sorry no good ducts.

I also need a good quality gas pedal ... 7.50 for std and 15.00 for a deluxe

Do you have any good quality windshield wiper tanks (with pump preferably), and coolant tanks. 85-up trucks have the pump. 20.00
Do you have a power steering pump bracket, maybe one that fits headers? sorry just just complete pumps.
Do you have a Hood Latch pull cord that mounts in cab and goes into engine bay? (I guess from a square body)Yes 15.00

Plus 15.00 shipping


Thanks, Tom

[ScottieB]

how much of this do you have?
http://www.lmctruck.com/icatalog/cb/full.aspx?Page=65

[cxune]

Hey - looking for a drum brake adjustment assembly for passenger side rear on a '71- the two parts that thread together and the cap. Hopefully for not too much money? : )

[Senorx]

Looking for the Orange lenses (rectangle) that go on the bumper of a 71-72. Would like nice driver to higher quality. Thanks.

[tll74]

Originally Posted by ScottieB

Can you please show me the 2 different gas pedals?
I want the pull cable, does it have the bracket that holds the handle? etc
If the wiper and coolant tanks are for our trucks (brackets too??) and hold liquid, I want them. If they are universal, I do not.
I am looking for the 80s / up horn grounding thing where you push on the horn and it blows. mine doesn't really work right. do you have one of them? The spring moves around and fails to make a ground
Pic of inside of mine: https://dl.dropboxusercontent.com/u/...905_110157.jpg

Do you have the 80's clock for cluster? (just the clock)
Do you have a Tach that works and will fit in the 3 3/8 empty gauge for our 69-72 clusters?

I'll get pics of the pedals.
Hood cable...yes it has the bracket that holds the cable. The bracket is part of the cable assy.
The 67-72's didn't have a washer pump incorporated in the bottle. GM trucks didn't offer this till 1985. It would work but not correct. I don't have a coolant tank as GM didn't offer them on 67-72's. I believe it was offered as a over counter accessory service part but rare.
I'll look into the horn.
Should have the clock. 20.00
Nothing on the tach.
I'll look into the ducts. I have complete AC change overs. I'll double check for some loose ducts.

Originally Posted by cxune

Hey - looking for a drum brake adjustment assembly for passenger side rear on a '71- the two parts that thread together and the cap. Hopefully for not too much money? : )

5.00 plus 5.00 usps shipping

Originally Posted by Senorx

Looking for the Orange lenses (rectangle) that go on the bumper of a 71-72. Would like nice driver to higher quality. Thanks.

Very nice pair for 25.00 plus 11.30 usps shipping


Thanks, Tom