Al's 71C10 Rebuild - Page 35 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

funkytechmonkey · 11-15-2011, 11:23 AM

What clamps are you going to use?
Posted via Mobile Device

gringoloco · 11-15-2011, 11:39 AM

Looks good. Get your wheels yet?

big_al_71 · 11-15-2011, 12:12 PM

Quote:

Originally Posted by jmedero

How does that master work for you? I cave power brakes in the burb an was actually thinking of going this route to clean up the firewall some more. I just think my truck would be too big and heavy for manual brakes.
Posted via Mobile Device

Juan I have been driving this truck with manual brakes for three years and the brakes were hard and you really have to press on them but they stop. I am looking forward to driving it now with four wheel disc and this master cylinder and I am hoping that it will not be as hard as the stock set up was. I really like the clean look of this set up.

Quote:

Originally Posted by funkytechmonkey

What clamps are you going to use?
Posted via Mobile Device

The company is called made for you
here is a link for them
https://www.made4uproducts.com/cart/...hp?prod=20-288.
Lolife Keith used them in his build and they really clean up the lnes and hold them in place nicely.

Quote:

Originally Posted by RocketKing

I really like the look of just the MC w/o the booster, really cleans up the firewall. I have almost talked myself into this also. Looks great!

Thanks Rex I really like the clean look of it also I just hope that it stops good.

Quote:

Originally Posted by gringoloco

Looks good. Get your wheels yet?

Thanks!!!!

No wheels yet....

Still waiting

mcbassin · 11-15-2011, 12:09 PM

Looking Good Al! Ready to see those new wheels too.

big_al_71 · 11-15-2011, 12:13 PM

Quote:

Originally Posted by mcbassin

Looking Good Al! Ready to see those new wheels too.

Thanks Mike!!!

Even if I cant drive the truck I just want to see it on the ground already with some wheels on there.

big_al_71 · 11-15-2011, 12:18 PM

this morning I spent a little time recleaning everything that I could not see last night and as VA72C10 suggested I painted the lines and I must say they definetly look better..

tonight I am going to retighten all the fittings as I saw some brake fluid by the crossmember and I am sure that I am going to have some leaks here and there. So I guess let the real fun begin chasing leaks.

**68 Four on the Floor** · 11-15-2011, 10:12 PM

Great looking build Al. Mind if i ask how good your brakes are without a boost? I want to go 4 wheel disc and like the boosterless look but don wanna suffer some performance ya know

**67cheby** · 11-15-2011, 10:14 PM

i dont think Al has driven this yet with the new brakes.....he just put the master cylinder on and he doesnt have wheels yet

Scottshotrods · 11-16-2011, 01:01 AM

Looking good

Justin

big_al_71 · 11-16-2011, 07:47 AM

Quote:

Originally Posted by 68 Four on the Floor

Great looking build Al. Mind if i ask how good your brakes are without a boost? I want to go 4 wheel disc and like the boosterless look but don wanna suffer some performance ya know

I have driven this truck fir three Years with a factory style master manual master cylinder with disc up front and drums in the rear the pedal is hard but the truck stop as good as it could get. The truck is almost finished and once I get my wheels I will let everyone know how great,good or bad these brakes perform. Thanks !!!!!

Quote:

Originally Posted by 67cheby

i dont think Al has driven this yet with the new brakes.....he just put the master cylinder on and he doesnt have wheels yet

Unfortunately this is correct
Posted via Mobile Device

big_al_71 · 11-16-2011, 07:48 AM

Quote:

Originally Posted by Scottshotrods

Looking good

Justin

Thank you for all your help and great service Justin !!!!!!
Posted via Mobile Device

72BlckButy · 11-16-2011, 08:30 AM

Love the new avy Al!

big_al_71 · 11-16-2011, 01:37 PM

Quote:

Originally Posted by 72BlckButy

Love the new avy Al!

I's beiing on my to do list for a few years now I am glad I finally bought it and installed it.
Thanks Nate

weaintscared · 11-16-2011, 02:49 PM

NICE
http://67-72chevytrucks.com/vboard/s...=1#post5013139

big_al_71 · 11-16-2011, 05:45 PM

Quote:

Originally Posted by weaintscared

NICE
http://67-72chevytrucks.com/vboard/s...=1#post5013139

Thank you!!

big_al_71 · 11-18-2011, 12:30 AM

Well tonight we decided that it was time to just finish the brakes before the holidays got here then there would be no time to play with the truck. I could not decide where to install the proportioning valve I thought I was set in putting iit in the frame somewhere then we dedided that the easiest place to install it would be right off the master cilynder and call it a day. we went ahead and remade that line one more time installed the proportioning valve on it installed the clamps for both lines bled the brakes checked for leaks and I think that we can say that the brakes are FINISHED!!!!! of course I have to drive it and make adjusments on the valve, the pedal feels good where is at.

The life of my story still waiting on wheels I am about to call Coys and buy another set till my wheels decide to show up.

here are some crappy cell picts to show the final assy.

**superflysteiny** · 11-22-2011, 09:38 PM

Looks cool
Posted via Mobile Device

bigguy69 · 11-27-2011, 11:57 PM

Posted via Mobile Device

bigguy69 · 11-27-2011, 11:58 PM

Any updates?
Posted via Mobile Device
Posted via Mobile Device

big_al_71 · 11-28-2011, 12:26 AM

I was told this week I should get the wheels shipped to me so stay tuned wheels get here get them mounted right of way.
Posted via Mobile Device

bobshotrodblazer · 11-28-2011, 08:38 AM

I'm anxious too, Albert
If done are you going to the flea mkt. show this weekend in Pompano?

big_al_71 · 11-28-2011, 09:09 AM

Hey bob yes. I Am going with the truck or without it. If you are going text me so we can meet.
Posted via Mobile Device

Bennett68C10 · 11-28-2011, 04:20 PM

Me too, now please lol
Posted via Mobile Device

**superflysteiny** · 11-29-2011, 01:40 PM

ok give me the number to the place were you bought your wheel. I am calling to complain. I cant wait any longer. I think I am more excited about your new shoes then you are.

big_al_71 · 11-29-2011, 05:32 PM

Quote:

Originally Posted by superflysteiny

ok give me the number to the place were you bought your wheel. I am calling to complain. I cant wait any longer. I think I am more excited about your new shoes then you are.

I am trying my best not to display my excitement with anticipation. I spoke to the vendor yesterday and he was checking on all his Billet specialties orders. They claim that they are a bit behind because of SEMA. I asked for a more concrete answer other than they are behind so stay tuned for an update

11-15-2011, 11:23 AM	#1
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: Al's 71C10 Rebuild What clamps are you going to use? Posted via Mobile Device __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

11-15-2011, 11:39 AM	#2
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Al's 71C10 Rebuild Looks good. Get your wheels yet? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-15-2011, 12:09 PM	#4
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Al's 71C10 Rebuild Looking Good Al! Ready to see those new wheels too. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-15-2011, 12:18 PM	#6
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Al's 71C10 Rebuild this morning I spent a little time recleaning everything that I could not see last night and as VA72C10 suggested I painted the lines and I must say they definetly look better.. tonight I am going to retighten all the fittings as I saw some brake fluid by the crossmember and I am sure that I am going to have some leaks here and there. So I guess let the real fun begin chasing leaks. Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

11-15-2011, 10:12 PM	#7
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: Al's 71C10 Rebuild Great looking build Al. Mind if i ask how good your brakes are without a boost? I want to go 4 wheel disc and like the boosterless look but don wanna suffer some performance ya know

11-15-2011, 10:14 PM	#8
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Al's 71C10 Rebuild i dont think Al has driven this yet with the new brakes.....he just put the master cylinder on and he doesnt have wheels yet __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-16-2011, 01:01 AM	#9
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Al's 71C10 Rebuild Looking good Justin

11-16-2011, 08:30 AM	#12
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Al's 71C10 Rebuild Love the new avy Al! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

11-16-2011, 02:49 PM	#14
weaintscared Registered User Join Date: Mar 2011 Location: Sumter SC Posts: 439	Re: Al's 71C10 Rebuild NICE http://67-72chevytrucks.com/vboard/s...=1#post5013139

11-18-2011, 12:30 AM	#16
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Al's 71C10 Rebuild Well tonight we decided that it was time to just finish the brakes before the holidays got here then there would be no time to play with the truck. I could not decide where to install the proportioning valve I thought I was set in putting iit in the frame somewhere then we dedided that the easiest place to install it would be right off the master cilynder and call it a day. we went ahead and remade that line one more time installed the proportioning valve on it installed the clamps for both lines bled the brakes checked for leaks and I think that we can say that the brakes are FINISHED!!!!! of course I have to drive it and make adjusments on the valve, the pedal feels good where is at. The life of my story still waiting on wheels I am about to call Coys and buy another set till my wheels decide to show up. here are some crappy cell picts to show the final assy. Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

11-22-2011, 09:38 PM	#17
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Al's 71C10 Rebuild Looks cool Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

11-27-2011, 11:57 PM	#18
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: Al's 71C10 Rebuild Posted via Mobile Device __________________ members met: redbaron69, billsbowtie,nc67

11-27-2011, 11:58 PM	#19
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: Al's 71C10 Rebuild Any updates? Posted via Mobile Device Posted via Mobile Device __________________ members met: redbaron69, billsbowtie,nc67

11-28-2011, 12:26 AM	#20
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Al's 71C10 Rebuild I was told this week I should get the wheels shipped to me so stay tuned wheels get here get them mounted right of way. Posted via Mobile Device __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

11-28-2011, 08:38 AM	#21
bobshotrodblazer BigBlockBobby Join Date: Mar 2004 Location: Lake Worth, Florida Posts: 740	Re: Al's 71C10 Rebuild I'm anxious too, Albert If done are you going to the flea mkt. show this weekend in Pompano? __________________ Bob



Register or Log In To remove these advertisements.

11-28-2011, 09:09 AM	#22
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Al's 71C10 Rebuild Hey bob yes. I Am going with the truck or without it. If you are going text me so we can meet. Posted via Mobile Device __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

11-28-2011, 04:20 PM	#23
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Al's 71C10 Rebuild Me too, now please lol Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

11-29-2011, 01:40 PM	#24
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Al's 71C10 Rebuild ok give me the number to the place were you bought your wheel. I am calling to complain. I cant wait any longer. I think I am more excited about your new shoes then you are. __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

Register or Log In To remove these advertisements.